참고문헌
- Kim, J.-B., Seo W.-S., and Park, K., "Damage Prediction in the Multistep Forging Process of Subminiature Screws," Int. J. Precis. Engng. Manuf., Vol. 13, No. 9, pp. 1619-1624, 2012. https://doi.org/10.1007/s12541-012-0212-2
- Yan, Y., Wen, W.-D., Chang, F.-K., and Shyprykevich, P., "Experimental Study on Clamping Effects on the Tensile Strength of Composite Plates with a Bolt-Filled Hole," Composites Part A: Applied Science and Manufacturing, Vol. 30, No. 10, pp. 1215-1229, 1999. https://doi.org/10.1016/S1359-835X(99)00002-0
- Drean, M., Habraken, A.-M., Bouchair, A., and Muzeau, J.-P., "Swaged Bolts: Modelling of the Installation Process and Numerical Analysis of the Mechanical Behavior," Computer & Structure, Vol. 80, No. 27-30, pp. 2361-2373, 2002. https://doi.org/10.1016/S0045-7949(02)00240-7
- Izumi, S., Yokoyama, T., Iwasaki, A., and Sakai, S., "Three-Dimensional Finite Element Analysis of Tightening and Loosening Mechanism of Threaded Fastener," Engineering Failure Analysis, Vol. 12, No. 4, pp. 604-615, 2005. https://doi.org/10.1016/j.engfailanal.2004.09.009
- Croccolo, D., Agostinis, M. D., and Vincenzi, N., "Failure Analysis of Bolted Joints: Effect of Friction Coefficients in Torque-Preloading Relationship," Engineering Failure Analysis, Vol. 18, No. 1, pp. 364-373, 2011. https://doi.org/10.1016/j.engfailanal.2010.09.015
- Han, J. W., Kim, J. H., and Park, Y. S., "Evaluation of Structural Performance and Improvement of Screw Thread Shape on 1,300 MPa High Strength Bolts," Journal of the Korean Society of Civil Engineering, Vol. 31, No. 3A, pp. 189-198, 2011.
- Hwang, H.-Y., "Bolted Joint Torque Setting using Numerical Simulation and Experiments," Journal of Mechanical Science and Technology, Vol. 27, No. 5, pp. 1361-1371, 2013. https://doi.org/10.1007/s12206-013-0317-2
- Kim. K. K., "A Study for Structural Characteristics of Tower Flange Connection under the Bolt Pretension in Offshore Wind Turbine System," M.Sc. Thesis, Department of Naval Architecture and Marine Engineering, Mokpo National University, 2011.
- Koo, S.-H., Cho, W.-M., and Lee, B.-E., "Structural Analysis for Thread Joint Part of Rocket Motor Case Applied Pre-Load," Journal of the Korea Institute of Military Science and Technology, Vol. 10, No. 1, pp. 144-149, 2007.
- Tohnichi Co., "Torque Technical Data," http://www.tohnichi.com/torque-technical-data.asp (Accessed 22 August 2014)
- Toshiyuki, S. and Yasumasa, S., "Analytical Research on Mechanism of Bolt Loosening Due to Lateral Loads," Proc. of ASME on Pressure Vessels and Piping, Vol. 2, No. PVP2005-71333, pp. 59-65, 2005.
- Toshiyuki, S., Mitsutoshi, I., and Hiroshi Y., "Experimental Evaluation of Screw Thread Loosening in Bolted Joint with Some Parts for Preventing the Loosening under Transverse Repeated Loadings," Proc. of ASME on Pressure Vessels and Piping/ICPVT-11, Vol. 2, No. PVP2006-ICPVT-11-93292, pp. 211-220, 2006.
피인용 문헌
- Design of Cold Forging Process of Micro Screw for Mobile Devices vol.16, pp.6, 2015, https://doi.org/10.5762/KAIS.2015.16.6.3692
- An investigation into the anti-releasing performance of a serrated bolt vol.29, pp.12, 2015, https://doi.org/10.1007/s12206-015-1111-0
- A Study on the Clamping Improvement of Precision Screws according to the Materials and Thread Changes vol.32, pp.6, 2015, https://doi.org/10.7736/KSPE.2015.32.6.503
- Finite Element Analysis for Improvement of Folding Defects in the Forging Process of Subminiature Screws vol.32, pp.6, 2015, https://doi.org/10.7736/KSPE.2015.32.6.509
- Thread Shape Design Using Joining and Release Analysis of Bolts vol.32, pp.6, 2015, https://doi.org/10.7736/KSPE.2015.32.6.523
- Investigation into Thread Rolling Characteristics of Subminiature Screws According to Thread Shapes vol.40, pp.11, 2016, https://doi.org/10.3795/KSME-A.2016.40.11.971