DOI QR코드

DOI QR Code

Bayesian updated correlation length of spatial concrete properties using limited data

  • Criel, Pieterjan (Ghent University, Department of Structural Engineering, Magnel Laboratory for Concrete Research) ;
  • Caspeele, Robby (Ghent University, Department of Structural Engineering, Magnel Laboratory for Concrete Research) ;
  • Taerwe, Luc (Ghent University, Department of Structural Engineering, Magnel Laboratory for Concrete Research)
  • 투고 : 2012.05.08
  • 심사 : 2013.12.27
  • 발행 : 2014.05.28

초록

A Bayesian response surface updating procedure is applied in order to update the parameters of the covariance function of a random field for concrete properties based on a limited number of available measurements. Formulas as well as a numerical algorithm are presented in order to update the parameters of response surfaces using Markov Chain Monte Carlo simulations. The parameters of the covariance function are often based on some kind of expert judgment due the lack of sufficient measurement data. However, a Bayesian updating technique enables to estimate the parameters of the covariance function more rigorously and with less ambiguity. Prior information can be incorporated in the form of vague or informative priors. The proposed estimation procedure is evaluated through numerical simulations and compared to the commonly used least square method.

키워드

참고문헌

  1. Baecher, G.B. and Christian, J.T. (2003), Reliability and statistics in geotechnical engineering: John Wiley & Sons.
  2. Box, G.E.P. and Tiao, G.C. (1992), Bayesian inference in statistical analysis: Wiley.
  3. Caspeele, R. and Taerwe, L. (2013), "Numerical Bayesian updating of prior distributions for concrete strength properties considering conformity control", Adv. Concrete Construct., 1(1), 85-102. https://doi.org/10.12989/acc.2013.1.1.085
  4. Cressie, N.A.C. (1993), Statistics for spatial data: J. Wiley.
  5. Duprat, F. (2007), "Reliability of RC beams under chloride-ingress", Construct. Build. Mater., 21(8), 1605-1616. https://doi.org/10.1016/j.conbuildmat.2006.08.002
  6. Emery, X. and Cornejo, J. (2010), "Truncated Gaussian simulation of discrete-valued, ordinal coregionalized variables", Comput. Geosci., 36(10), 1325-1338. https://doi.org/10.1016/j.cageo.2010.03.013
  7. Emery, X. and Lantuejoul, C. (2006), "TBSIM: A computer program for conditional simulation of threedimensional Gaussian random fields via the turning bands method", Comput. Geosci., 32(10), 1615-1628. https://doi.org/10.1016/j.cageo.2006.03.001
  8. Engelund, S. (1997), Probabilistic Models and Computational Methods for Chloride Ingress in Concrete. . Aalborg University, Aalborg
  9. Fenton, G. (1994), "Error evaluation of three random field generators", J. Eng. Mech., 120(12), 2478-2497. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:12(2478)
  10. Firouzi, A. and Rahai, A.R. (2011), Prediction of extent and liklihood of corrosion-induced cracking in reinforced concrete bridge decks, Int. J. Civil Eng., 9(3), 183-192.
  11. Gamerman, D. and Lopes, H.F. (2006), Markov Chain Monte Carlo: Stochastic Simulation for Bayesian Inference, Second Edition: Taylor & Francis.
  12. Gelman, A., Carlin, J.B., Stern, H.S. and Rubin, D.B. (2003), Bayesian Data Analysis: Chapman & Hall/CRC.
  13. Ghosh, J.K., Delampady, M. and Samanta, T. (2010), An Introduction to Bayesian Analysis: Theory and Methods: Springer.
  14. Gregory, P. (2005), Bayesian Logical Data Analysis for the Physical Sciences: A Comparative Approach with $Mathematica^{(R)}$ Support: Cambridge University Press.
  15. Griffiths, D., Fenton, G. and Manoharan, N. (2002), Bearing Capacity of Rough Rigid Strip Footing on Cohesive Soil: Probabilistic Stud, J. Geotech. Geoenviron. Eng., 128(9), 743-755. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:9(743)
  16. Griffiths, D.V., Huang, J. and Fenton, G.A. (2011), "Probabilistic infinite slope analysis", Comput. Geotech., 38(4), 577-584. https://doi.org/10.1016/j.compgeo.2011.03.006
  17. Hastings, W.K. (1970), "Monte Carlo sampling methods using Markov chains and their applications", Biometrika, 57(1), 97-109. https://doi.org/10.1093/biomet/57.1.97
  18. Kessler, S., Huber, M., Straub, D., Gehlen, C. and Moormann, C. (2010), Stochastic Evaluation of Active Corroding Areas in Concrete Structures, Paper presented at the 8th International Probabilistic Workshop, Szczecin.
  19. Lee, P.M. (2012), Bayesian Statistics: An Introduction: Wiley.
  20. Li, Y. (2004), Effect of Spatial Variability on Maintenance and Repair Decisions for Concrete Structures. Delft University Press.
  21. Liu, J.S. (2008), Monte Carlo Strategies in Scientific Computing: Springer.
  22. Mantoglou, A. and Wilson, J.L. (1982), "The Turning Bands Method for simulation of random fields using line generation by a spectral method, Water Resour. Res., 18(5), 1379-1394. https://doi.org/10.1029/WR018i005p01379
  23. Matheron, G. (1962), Traite de geostatistique appliquee (Vol. 14), Editions Technip.
  24. Matheron, G. (1973), "The itrinsic rndom fnctions and their aplications", Adv. Appl. Prob., 5(3), 439-468. https://doi.org/10.2307/1425829
  25. Most, T. and Bucher, C. (2006), Stochastic simulation of cracking in concrete structures using multiparameter random fields, Int. J. Reliab. Safety, 1(1/2), 168-187. https://doi.org/10.1504/IJRS.2006.010696
  26. Most, T. and Bucher, C. (2007), Probabilistic analysis of concrete cracking using neural networks and random fields, Prob. Eng. Mech., 22(2), 219-229. https://doi.org/10.1016/j.probengmech.2006.11.001
  27. Nicholas, M., Arianna, W.R., Marshall, N.R., Augusta, H.T. and Edward, T. (1953), "Equation of State Calculations by Fast Computing Machines", J. Chem. Phys., 21(6), 1087-1092. https://doi.org/10.1063/1.1699114
  28. Perrin, F.S., Pendola, M. and De Rocquigny, E. (2007), Comparison of Markov chain Monte Carlo simulation and FORM-based approach for Bayesian updating of mechanical models. Paper presented at the 10th int. Conf. on Applications of Statistics and Probaility in Civil Engineering, Tokyo.
  29. Robert, C. and Casella, G. (2010), Monte Carlo Statistical Methods: Springer.
  30. Santoso, A.M., Phoon, K.K. and Quek, S.T. (2011), Modified Metropolis-Hastings algorithm with reduced chain correlation for efficient subset simulation, Prob.Eng. Mech., 26(2), 331-341. https://doi.org/10.1016/j.probengmech.2010.08.007
  31. Stewart, M.G. and Mullard, J.A. (2007), "Spatial time-dependent reliability analysis of corrosion damage and the timing of first repair for RC structures", Eng. Struct., 29(7), 1457-1464. https://doi.org/10.1016/j.engstruct.2006.09.004
  32. Straub, D. (2011), Reliability updating with inspection and monitoring data in deteriorating reinforced concrete slabs. Paper presented at the Application of Statistics and Probability in Civil Engineering, London.
  33. Straub, D. and Fischer, J. (2011), Reliability Assessment of Corroding Reinforced Concrete Slabs with Inspection Data. Paper presented at the 9th International Probabilistic Workshop, TU Braunschweig, germany.
  34. Trefethen, L.N. and Bau, D. (1997), Numerical Linear Algebra: SIAM.
  35. Van Der Vurst, F., Caspeele, R., Desnerck, P., Schutter, G.D. and Peirs, J. (2014), Modification of existing shape factor models for self- compacting concrete strength by means of Bayesian updating techniques, Materials and Structures.
  36. Vanmarcke, E. (2010), Random Fields: Analysis and Synthesis: World Scientific.
  37. Vasconcellos Real, M.D., Filho, A.C. and Maestrini, S.R. (2003), "Response variability in reinforced concrete structures with uncertain geometrical and material properties", Nuclear Eng. Des., 226(3), 205-220. https://doi.org/10.1016/S0029-5493(03)00110-9
  38. Vu, K.A.T. (2003), Corrosion-induced cracking and spatial timedependent reliability analysis of reinforced concrete structures, The University of Newcastle, New South Wales, Australia.

피인용 문헌

  1. A computational framework for Bayesian inference in plasticity models characterisation vol.321, 2017, https://doi.org/10.1016/j.cma.2017.04.017