참고문헌
- Mark, D., Haeberle, S., Roth, G., von Stetten, F., and Zengerle, R., "Microfluidic Lab-On-A-Chip Platforms: Requirements, Characteristics and Applications," Chemical Society Reviews, Vol. 39, No. 3, pp. 1153- 1182, 2010. https://doi.org/10.1039/b820557b
- Nge, P. N., Rogers, C. I., and Woolley, A. T., "Advances in Microfluidic Materials, Functions, Integration, and Applications," Chemical Reviews, Vol. 113, No. 4, pp. 2550-2583, 2013. https://doi.org/10.1021/cr300337x
- Becker, H. and Locascio, L. E., "Polymer Microfluidic Devices," Talanta, Vol. 56, No. 2, pp. 267-287, 2002. https://doi.org/10.1016/S0039-9140(01)00594-X
- Reinholt, S. J., Behrent, A., Greene, C., Kalfe, A., and Baeumner, A. J., "Isolation and Amplification of Mrna within a Simple Microfluidic Lab on a Chip," Analytical Chemistry, Vol. 86, No. 1, pp. 849-811, 2013.
- Lee, C. S., Kang, C. G., and Youn, S. W., "Effect of Forming Conditions on Linear Patterning of Polymer Materials by Hot Embossing Process," Int. J. Precis. Eng. Manuf., Vol. 11, No. 1, pp. 119-127, 2010. https://doi.org/10.1007/s12541-010-0015-2
- Klank, H., Kutter, J. P., and Geschke, O., "Co2-laser Micromachining and Back-end Processing for Rapid Production of Pmma-based Microfluidic Systems," Lab on a Chip, Vol. 2, No. 4, pp. 242-246, 2002. https://doi.org/10.1039/b206409j
- Tsao, C. W. and DeVoe, D. L., "Bonding of Thermoplastic Polymer Microfluidics," Microfluidics and Nanofluidics, Vol. 6, No. 1, pp. 1-16, 2009. https://doi.org/10.1007/s10404-008-0361-x
- Tran, H. H., Wu, W., and Lee, N. Y., "Ethanol and Uv-assisted Instantaneous Bonding of Pmma Assemblies and Tuning in Bonding Reversibility," Sensors and Actuators B: Chemical, Vol. 181, No. pp. 955-962, 2013. https://doi.org/10.1016/j.snb.2012.11.060
- Park, T., Song, I. H., Park, D. S., You, B. H., and Murphy, M. C.,"Thermoplastic Fusion Bonding using a Pressure-assisted Boiling Point Control System," Lab on a Chip, Vol. 12, No. 16, pp. 2799- 2802, 2012. https://doi.org/10.1039/c2lc40252a
- Ahn, D. G., Lee, H. J., and Ahn, Y. S., "Joining Technology of Flat Panel Photobioreactor Case," J. Korean Soc. Precis. Eng., Vol. 30, No. 2, pp. 154-163, 2013. https://doi.org/10.7736/KSPE.2013.30.2.154
- Cho, Y. H., Kim, S. D., and Hwang, J. H., "Curve- Typed Pmma Nanochannel Fabrication using Polymer Layer Transfer and Collapse Technique," J. Korean Soc. Precis. Eng., Vol. 29, No. 1, pp. 114-120, 2012. https://doi.org/10.7736/KSPE.2012.29.1.114
- Nayak, N. C., Yue, C., Lam, Y., and Tan, Y., "Thermal Bonding of Pmma: Effect of Polymer Molecular Weight," Microsystem Technologies, Vol. 16, No. 3, pp. 487-491, 2010. https://doi.org/10.1007/s00542-009-0926-y
- Henry, A. C., Tutt, T. J., Galloway, M., Davidson, Y. Y., McWhorter, C. S., and et al., "Surface Modification of Poly(methyl methacrylate) used in the Fabrication of Microanalytical Devices," Analytical Chemistry, Vol. 72, No. 21, pp. 5331-5337, 2000. https://doi.org/10.1021/ac000685l
- Sperling, L. H., "Introduction to Physical Polymer Science," John Wiley & Sons, 2005.
- Afifi, H. and Hasan, E., "Annealing Effect on Microhardness and Elastic Constants of Pmma," Polymer-Plastics Technology and Engineering, Vol. 42, No. 4, pp. 543-554, 2003. https://doi.org/10.1081/PPT-120023094
- Yu, D. I., Doh, S. W., Kwak, H. J., Ahn, H. S., Kim, M. H., and et al., "Apparent Contact Angle on the Hydrophilic/Hydrophobic Surfaces with Micropillars,"J. Korean Soc. Precis. Eng., Vol. 31, No. 2, pp. 171-178, 2014. https://doi.org/10.7736/KSPE.2014.31.2.171
- Long, J., Hyder, M., Huang, R., and Chen, P., "Thermodynamic Modeling of Contact Angles on Rough, Heterogeneous Surfaces," Advances in Colloid and Interface Science, Vol. 118, No. 1, pp. 173-190, 2005. https://doi.org/10.1016/j.cis.2005.07.004
- Tsao, C., Hromada, L., Liu, J., Kumar, P., and DeVoe, D., "Low Temperature Bonding of Pmma and Coc Microfluidic Substrates using Uv/ozone Surface Treatment," Lab on a Chip, Vol. 7, No. 4, pp. 499-505, 2007. https://doi.org/10.1039/b618901f
- Sun, Y., Kwok, Y. C., and Nguyen, N. T., "Low- Pressure, High-Temperature Thermal Bonding of Polymeric Microfluidic Devices and Their Applications for Electrophoretic Separation," Journal of Micromechanics and Microengineering, Vol. 16, No. 8, pp. 1681, 2006. https://doi.org/10.1088/0960-1317/16/8/033
- Park, D. S. W., Chen, P. C., You, B. H., Kim, N., Park, T., Lee, T. Y., and et al., "Titer Plate Formatted Continuous Flow Thermal Reactors for High Throughput Applications: Fabrication and Testing," Journal of Micromechanics and Microengineering, Vol. 20, No. 5, pp. 055003, 2010. https://doi.org/10.1088/0960-1317/20/5/055003
- Mathur, A., Roy, S., Tweedie, M., Mukhopadhyay, S., Mitra, S., and McLaughlin, J., "Characterisation of Pmma Microfluidic Channels and Devices Fabricated by Hot Embossing and Sealed by Direct Bonding," Current Applied Physics, Vol. 9, No. 6, pp. 1199-1202, 2009. https://doi.org/10.1016/j.cap.2009.01.007
- Palm, G., Castro, J., and Dupaix, R., "Large Strain Mechanical Behavior of Poly (methyl methacrylate) (pmma) near the Glass Transition Temperature," Journal of Engineering Materials and Technology, Vol. 128, No. 4, pp. 559-563, 2006. https://doi.org/10.1115/1.2345447
피인용 문헌
- Numerical Analysis of the Filling Stage in Insert Injection Molding of Microfluidic Chip with Metal Electrodes vol.32, pp.11, 2015, https://doi.org/10.7736/KSPE.2015.32.11.969
- Investigation of Thermal Fusion Bonding and Separation of PMMA Substrates by using Molecular Dynamics Simulations vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.111