Journal of the Korea Institute of Building Construction (한국건축시공학회지)

The Korean Institute of Building Construction (한국건축시공학회)
권호 표지
DOI QR코드

DOI QR Code

Constructability of a Waterproofing Sheet Joint Combining an Aluminum Thin-film and Viscosity Layer Using a High-frequency Inductive Heating Apparatus

고주파 유도가열 장치를 이용한 알루미늄 박판 점착 복합방수시트 조인트부의 시공성

  • Received : 2013.12.23
  • Accepted : 2014.02.10
  • Published : 2014.04.20
Download PDF
⟨ Previous Next ⟩

Abstract

Engineers in the construction field have been using bonded waterproofing sheets in an attempt to resolve the imbalance in the quality, the risk of fire, safety of workers, and environmental pollution, as well as to eliminate separate use of organic adhesives on the surface of concrete. Recently, self-laminated waterproofing sheets have been developed. The purpose of this research is to find an appropriate processing speed according to the changes in physical properties, and visual observation of the waterproofing sheets laminated by the aluminum thin-film and viscosity layer that can be attached through self-adhesiveness on the surface of concrete and waterproofing sheets. Therefore, this research is conducted using a physical performance test. Based on the result of the test, when the high-frequency inductive heating apparatus was used, an improved adhesion and bonding stability effect were confirmed after the anti-hydrostatic pressure and bond strength in the temperature condition, and the surface observation in the processing speed condition.

Keywords

References

  1. Jung HS, Kang HJ, Song JY, Oh SK. An Experimental Study on the Adhesion Property of Self Adhesive Rubberized Asphalt Waterproofing Sheet. Journal of the Korea Institute of Building Construction. 2005 May;5(1):1-4.
  2. Miyauchi H, Kim GY, Nam JS, Koo KM, Lee TG, Park YJ. Proposal of Wind Resistance Evaluation Method for Mechanically Anchored Waterproofing Membrane System. Journal of the Architectural Institute of Korea Structure & Construction. 2011 Mar;27(3):107-14.
  3. Sun YS, Oh SK, A Study on the Bonding Property and the Performance of Self-Adhesive Rubber Asphalt Sheet Reinforced HDPE . Seoul National University of Science & Technology. 2005 Feb;54(2):515-20
  4. Oh SK, Choi SM, Lee JH. An Experimental Study on the Influence of a Low Temperature Environment on Adhesiveness of the Self Adhesion Waterproofing Sheets. Journal of the Architectural Institute of Korea Structure & Construction. 2010 Jan;26(1):113-20.
  5. Jung HS, Oh SK, Lim NG, Suggestion for Performance Evaluation Index of Self-Adhesive Waterproofing Sheet considering Environmental Condition of Construction Field. Journal of the Architectural Institute of Korea Structure & Construction. 2011 Nov;27(11):127-34.
  6. Park JS, Bae KS, Oh SK. A Study on Performance Evaluation on Self-Adhesion Aluminum Composite Waterproofing Sheet to Apply High-Frequency Induction Heating. Proceeding of Journal of the Architectural Institute of Japan; 2011 Jul 20; Tokyo, Japan. Tokyo (Japan): Journal of the Architectural Institute of Japan; 2011. p.31-2.
  7. Kwon YH, Oh SK, Ahn YS, Performance Evaluation on the Waterproofing and Root Penetration Resistance Membrane Formed by Combining the Fiberglass Reinforced Plastic and the Self Adhesion Butyl Rubber Sheet for Green Roof System. Journal of the Architectural Institute of Korea Structure & Construction. 2011 Sep;27(9):117-24.
  8. Shin DC, Kim SH. A Study on the Heating of Aluminum Sheet by Full-Bridge Resonant Inverter. Journal of the Korean Institute of Illuminating and Electrical Installation Engineers. 2005 Jul;19(8):56-61. https://doi.org/10.5207/JIEIE.2005.19.8.056
  9. Kwon HM, Shin DC, Kim KH, Kim YJ. A Study on the High-Frequency Resonant Inverter System for Indirect Induction Heating. Proceeding of Journal of the Korean Institute of Power Electronics; 2002 Jul 3-6; Taeangun, Korea. Seoul (Korea): Journal of the Korean Institute of Power Electronics; 2002. p.322-5.
  10. Lee JH, Park CW. The Design of Series Resonant High Frequency Induction Heating System for Vari Power. Proceeding of Journal of the Korean Institute of Electrical Engineers; 2001 Jul 4-7; Tongyounggun, Korea. Seoul (Korea): Journal of the Korean Institute of Electrical Engineers; 2001. p.1105-7.