KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Effective Strength of 3-Dimensional Concrete Strut

3차원 콘크리트 스트럿의 유효강도

  • 윤영묵 (경북대학교 건축토목공학부)
  • Received : 2012.11.10
  • Accepted : 2013.12.28
  • Published : 2014.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

For the reliable design of the structural concrete by the strut-tie model approaches of current design codes, the effective strengths of concrete struts must be determined with sufficient accuracy. Many values and equations for the effective strengths have been suggested until now. As those are for the two-dimensional concrete struts, however, it is inappropriate to employ them in the strut-tie model designs of three-dimensional structural concretes. In this study, an approach, that determines the effective strengths of three-dimensional concrete struts consistently and accurately by reflecting the state of 3-dimensional stresses, the 3-dimensional failure criteria of concrete, the degree of cracks (or tensile strains of reinforcing bars crossing the struts), the strut's longitudinal length, the deviation angle between strut orientation and compressive principal stress flow, compressive strength of concrete, and the degree of concrete confinement by reinforcing bars, is proposed. To examine the validity of the proposed approach, the ultimate strength analyses of 115 reinforced concrete pile caps tested to failure by previous investigators were conducted by the ACI 318-11's strut-tie model approach with the existing and proposed effective strengths of concrete struts.

스트럿-타이 모델 방법을 이용한 콘크리트 구조부재의 설계 시 가장 중요한 요소 중 하나는 콘크리트 스트럿의 유효강도를 정확하게 결정하는 것이다. 콘크리트 스트럿의 유효강도를 결정하기 위한 많은 연구가 진행되어 왔으며, 여러 종류의 스트럿의 유효강도 값 및 산정식이 제안되었다. 그러나 이들은 2차원 콘크리트 구조부재의 스트럿-타이 모델 설계를 위한 것으로, 그 값을 3차원 콘크리트 구조부재의 설계에 적용하는 것은 적절하지 않다. 이 연구에서는 콘크리트 스트럿이 위치한 곳의 3축 응력 상태, 콘크리트의 3차원 파괴기준, 스트럿 길이의 영향, 스트럿과 압축 주응력 흐름과의 불일치의 영향, 콘크리트 압축강도의 영향, 그리고 철근에 의한 콘크리트 스트럿의 구속의 정도 등을 고려하여 3차원 콘크리트 스트럿의 유효강도를 일관성 있게 결정할 수 있는 방법을 제안하였다. 제안한 방법의 타당성을 검증하기 위해 기존 연구자들에 의해 파괴실험이 수행된 115개의 철근콘크리트 파일캡 시험체의 극한강도를 평가하였으며, 그 결과를 실험결과 및 현행 설계기준에서 제안한 스트럿의 유효강도 값을 이용하여 평가한 결과와 비교분석하였다.

Keywords

References

  1. ACI Subcommittee 445 (2002). Examples for the design of structural concrete with strut-and-tie models; SP-208, American Concrete Institute, Farmington Hills, Michigan, USA.
  2. ACI-ASCE Committee 445 (2010). Further examples for the design of structural concrete with strut-and-tie models; SP-273, American Concrete Institute, Farmington Hills, Michigan, USA.
  3. Adebar, P., Kuchma, D. and Collins, M. P. (1990). "Strut-and-tie models for the design of pile caps: An experimental study." ACI Structural Journal, Vol. 87, No. 1, pp. 81-92.
  4. Adebar, P. and Zhou L. (1996). "Design of deep pile caps by strut-and-tie models." ACI Structural Journal, Vol. 93, No. 4, pp. 437-448.
  5. American Concrete Institute (2008). Building code requirements for structural concrete (ACI 318M-08) and commentary, Farmington Hills, Michigan, USA.
  6. American Concrete Institute (2011). Building code requirements for structural concrete (ACI 318M-11) and commentary, Farmington Hills, Michigan, USA.
  7. American Association of State Highway and Transportation Officials (2007). AASHTO LRFD bridge design specifications, 4th Edition, Washington, D.C., USA.
  8. American Association of State Highway and Transportation Officials (2010). AASHTO LRFD bridge design specifications, 5th Edition, Washington, D.C., USA.
  9. Bergmeister, K., Breen, J. E., Jirsa, J. O. and Kreger, M. E. (1993). Detailing in structural concrete, Research Report 1127-3F, University of Texas at Austin, Texas, USA.
  10. Canadian Standards Association (2004). Design of concrete structures for buildings, A23.3-M04, Rexdale, Ontario, Canada.
  11. Clarke, J. L. (1973). Behavior and design of pile caps with four piles, Report No. 42.489, Cement and Concrete Association, London, UK.
  12. Comite Euro-International du Beton (2010). CEP-FIP model code 2010, International Federation for Structural Concrete (fib), Lausanne, Switzerland.
  13. European Committee for Standardization (2004). Eurocode 2: Design of Concrete Structures, Brussels, Belgium.
  14. Jeun, C. H. and Yun, Y. M. (2010). "Validity evaluation of effective strength of concrete strut using strut-tie model analysis of structural concrete." Journal of the Korean Society of Civil Engineers, Vol. 30, No. 5A, pp. 443-462 (in Korean).
  15. Kim, B. H., Chae, H. S. and Yun, Y. M. (2013). "Refined 3-dimensional strut-tie models for analysis and design of reinforced concrete pile caps." Journal of the Korean Society of Civil Engineers, Vol. 33, No. 1A, pp. 1-16 (in Korean). https://doi.org/10.12652/Ksce.2013.33.1.001
  16. Korean Concrete Institute (2013). Design examples of structural concretes by strut-tie models (KCI-B-13-003), Ki Moon Dang, p. 261 (in Korean).
  17. MacGregor, J. G. (1997). Reinforced concrete - Mechanics and Design, 3rd Edition, Prentice Hall, Englewood Cliffs, New Jersey, USA.
  18. Marti, P. (1985). "Basic tools of reinforced concrete beam design." Journal of American Concrete Institute, Vol. 82, No. 1, pp. 46-56.
  19. Nielsen, M. P., Braestrup, M. W., Jensen, B. C. and Bach, F. (1978). Concrete plasticity, beam shear - Shear in Joints - Punching Shear, Special Publication, Danish Society for Structural Science and Engineering, Lyngby, Denmark.
  20. Portland Cement Association (2004). AASHTO LRFD strut-tie model design examples, Skokie, Illinois, USA.
  21. Ramirez, J. A. and Breen, J. E. (1983). Proposed design procedure for shear and torsion in reinforced and prestressed concrete, Research Report 248-4F, Center for Transportation Research, University of Texas at Austin, Texas, USA.
  22. Sabnis, G. M. and Gogate, A. B. (1984). "Investigation of thick slab (pile cap) behavior." Proc., ACI Journal, Farmington Hills, Michigan, Vol. 81, pp. 35-39.
  23. Schlaich, J., Schaefer, K. and Jennewein, M. (1987). "Towards a consistent design of structural concrete." Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, pp. 74-151.
  24. Suzuki, K., Otsuki, K. and Tsubata, T. (1998). "Influence of bar arrangement on ultimate strength of four-pile caps." Transactions of the Japan Concrete Institute, Vol. 20, pp. 195-202.
  25. Suzuki, K., Otsuki, K. and Tsubata, T. (1999). "Experimental study on four-pile caps with taper." Transactions of the Japan Concrete Institute, Vol. 21, pp. 361-368.
  26. Suzuki, K., Otsuki, K. and Tsuchiya, T. (2000). "Influence of edge distance on failure mechanism of pile caps." Transactions of the Japan Concrete Institute, Vol. 22, pp. 361-368.
  27. Suzuki, K. and Otsuki, K. (2002). "Experimental study on corner shear failure of pile caps." Transactions of the Japan Concrete Institute, Vol. 23, pp. 303-310.
  28. Thurlimann, B. (1976). Shear strength of reinforced and prestressed concrete - CEB Approach, Special Publication 59-6, American Concrete Institute, Detroit, USA.
  29. Vecchio, F. J. and Collins, M. P. (1982). The response of reinforced concrete to in-plane shear and normal stresses, Publication No. 82-03, Department of Civil Engineering, University of Toronto, Canada.
  30. Willam, K. J. and Warnke, E. P. (1974). "Constitutive model for the triaxial behavior of concrete." Proc., International Association of Bridge Structures, Vol. 19, pp. 1-30.
  31. Yun, Y. M. and Ramirez, J. A. (1996). Strength of struts and nodes in strut-tie model, Journal of Structural Engineering, ASCE, Vol. 122, pp. 20-29. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(20)
  32. Yun, Y. M. (2005). "Effective strength of concrete strut in strut-tie model (I): Methods for Determining Effective strength of Concrete Strut." Journal of the Korean Society of Civil Engineers, Vol. 25, No. 1A, pp. 49-59 (in Korean).
  33. Yun, Y. M. and Park, J. W. (2006). "3-Dimensional strut-tie model analysis and design of structural concrete." Journal of the Korean Society of Civil Engineers, Vol. 26, No. 3A, pp. 411-419 (in Korean).