Journal of the Korea Safety Management & Science (대한안전경영과학회지)

Korea Safety Management & Science (대한안전경영과학회)
권호 표지
DOI QR코드

DOI QR Code

Comparison of the Pushing Forces between Horizontal Handle and Vertical Handle According to the Handle Height and Distance

수직형 손잡이와 수평형 손잡이의 높이와 간격에 따른 미는 힘 비교

  • Song, Young-Woong (Department of Occupational Health, Catholic University of Daegu)
  • 송영웅 (대구가톨릭대학교 산업보건학과)
  • Received : 2014.10.20
  • Accepted : 2014.12.18
  • Published : 2014.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Manual materials handling tasks are the main risk factors for the work-related musculoskeletal disorders. Many assistant tools for manual materials handling are being used in various kind of industries. One of them is a 4-wheeled cart which is widely used in manufacturing factories, hospitals, etc. The major force required to control the 4-wheeled cart is pushing and pulling. There are two types of handles being used for the 4-wheeled cart : vertical type (two vertical handles), and horizontal type (one horizontal handle). This study tried to investigate the pushing forces and subjective discomforts (hand/writst, shoulder, low back, and overall) of the two handle types with different handle height and distance conditions. Twelve healthy male students (mean age = 23.4 years) participated in the experiment. The independent variables were handle angle (horizontal, vertical), handle height (low, medium, high), and handle distance (narrow, medium, wide). The full factorial design was used for the experiment and the maximum pushing forces were measured in 18 different conditions ($2{\times}3{\times}3$). Analysis of variance (ANOVA) procedure was conducted to test the effects of the independent variables on the pushing force and discomfort levels. Handle height and angle were found to be the critical design factors that affect the maximal pushing forces and subjective discomfort. In the middle height, subjects exerted higher pushing forces, and experience lower discomfort levels compared to the high, and low height. There was no statistical influence of the handle distance to the pushing forces and subjective discomfort levels. It was found out that the effects of the handle angle (horizontal and vertical) on both pushing force and subjective discomfort were statistically significant (p < 0.05). The vertical handle revealed higher pushing force and lower discomfort level than the horizontal handle. The reason for that was thought to be the different postures of the hand when grasping the handles. The horizontal handle induced pronaton of the hand and made hand posture more deviated from the neutral position.

Keywords

References

  1. Ministry of Employment and Labor(2013), "Statistics of the Industrial Accident in 2012." Korean Ministry of Employment and Labor.
  2. Genevieve Baril-Gingras, Monique Lortie(1995), "The handling of objects other than boxes: univariate analysis of handling techniques in large transport company." Ergonomics, 38: 905-925. https://doi.org/10.1080/00140139508925159
  3. Kathleen Mack, Christine M. Haslegrave, Michael I. Gray, M.I.(1995), "Usability of manual handling aids for transporting materials." Applied Ergonnomics, 26: 353-364. https://doi.org/10.1016/0003-6870(95)00056-9
  4. Jesper Sandfeld, Christian Rosgaard, Bente R. Jensen(2014), "L4-L5 compression and anterior/posterior joint shear forces in cabin attendants during the initial push/pull actions of airplane meal carts." Applied Ergonomics, 45: 1067-1075. https://doi.org/10.1016/j.apergo.2014.01.006
  5. Khaled W. Al-Eisawi, Carter J. Kerk, Jerome J. Congleton, Alfred A. Amendola, Omer C. Jenkins, Will Gaines(1999), "Factors affecting minimum push and pull forces of manual carts." Applied Ergonomics, 30: 235-245. https://doi.org/10.1016/S0003-6870(98)00019-2
  6. AJ Van der Beek, BDR Kluver, MHW Frings-Dresen, MJM Hoozemans(2000), "Gender differences in exerted forces and physiological load during pushing and pulling of wheeled cages by postal workers." Ergonomics, 42: 269-281.
  7. Sharawan Kumar(1995), "Upper body push-pull strength of normal young adults in sagittal plane at three heights.", International Journal of Industrial Ergonomics, 15: 427-436. https://doi.org/10.1016/0169-8141(94)00062-8
  8. Jia-Hua Lin, Raymond W. McGorry, Chien-Chi Chang(2012), "Effects of handle orientation and between-handle distance on bi-manual isometric push strength.", Applied Ergonomics, 43: 664-670. https://doi.org/10.1016/j.apergo.2011.10.004
  9. Myung-Guk Moon, Chul-Hong Kim(2006) "A study for the measure and application of maximum push strengths for Korean male/female at different working positons and handle types." Proceedings of the Ergonomics Society of Korea, 177-180.
  10. Dong-Pil Woo, Dong-Choon Lee(2013), "A Study on the Push and Pull Strength for the Design of Cart Handle." Journal of the Ergonomics Society of Korea, 32: 405-411. https://doi.org/10.5143/JESK.2013.32.4.405
  11. Biman Das, Julia Wimpee, Bijon Das(2002), "Ergonomics evaluation and redesign of a hospital meal cart.", Applied Ergonomics, 33: 309-318. https://doi.org/10.1016/S0003-6870(02)00018-2
  12. Olanrewaju O. Okunribido, Christine M. Haslegrave(2008), "Ready steady push-a study of the role of arm posture in manual exertions.", Ergonomics 51: 192-216. https://doi.org/10.1080/00140130701526374
  13. Ju-Young Kim, Uh-Nyung Noh, Byung-Jun Youn, Chi-Geun Youn, Jae-Sun Jang(2011), "Statistical Analysis for Health and Medical Treatment", KMS.
  14. Young-Woong Song, Kyung-Ah Kim, Ho-Chul Lee(2012), "Evaluation of the Pushing, Lifting and Twisting Forces According to the Handle Design Variables of the Single-Wheel Barrows.", Journal of the Korean Society of Safety 27: 84-91.