Abstract
In this paper, we investigate the type and detection methode of spoofing attack, and then analyze the performance of spoofing detection algorithm in GPS L1 signal through the simulation. Generally spoofer is different from the jammer, because the receiver can be operated and not. In case of spoofing the GPS receiver is hard to recognize the spoofing attack and can be operated normally without stopping because the spoofing signal is the mimic GPS signal. To evaluate the performance of spoofing detection algorithm, both the software based spoofing and GPS signal generator and the software based GPS receiver are implemented. In paper, we can check that spoofing signal can affect to the DLL and PLL tracking loop because code delay and doppler frequency of spoofing. The spoofing detection algorithm has been implemented using the pseudorange, signal strength and navigation solution of GPS receiver and proposed algorithm can effectively detect the spoofing signal.
본 논문에서는 GPS L1 신호에 대한 기만의 종류 및 이를 검출하기 위한 방법에 대한 연구를 수행하고 GPS L1 신호에 대한 기만신호 검출 및 판단 알고리즘을 구현한 후 시뮬레이션을 통하여 성능을 분석하였다. 수신기의 동작 여부에 따라 기만과 재밍신호가 차이가 있으며 기만신호는 재밍신호와 달리 GPS 신호와 유사한 신호로 수신기를 공격하므로 기만 대상 수신기에서는 정상동작하는 것처럼 판단하게 되며 따라서 수신기에서 기만공격을 판단하기란 매우 어렵다. 기만신호 검출 및 판단 알고리즘의 성능을 검증하기 위하여 소프트웨어 기반의 기만신호/정상 GPS 신호생성기와 소프트웨어 기반의 수신기를 구현하였다. 본 논문에서 기만신호의 코드지연 및 도플러 주파수 변이에 따른 수신기의 DLL/PLL의 출력 오차를 확인하였다. 또한 수신기의 출력값인 의사거리, 신호세기, 항법해를 이용하여 기만신호 검출 및 판단 알고리즘을 구현하였으며 기만신호를 효율적으로 검출 및 판단할 수 있었다.