• Journal of electromagnetic engineering and science
• /
• v.19 no.2
• /
• pp.107-114
• /
• 2019

Alert-confirm detection is a highly efficient method to improve phased array radar search performance. It comprises sequential detection in two steps: alert detection, in which a target is detected at a low detection threshold, and confirm detection, which is triggered by alert detection with a longer dwell time to minimize false alarms. This paper provides a design method for applying the alert-confirm detection to multifunctional radars. We find optimum dwell times and false alarm probabilities for each alert detection and confirm detection under the dual constraints of total false alarm probability and maximum allowable dwell time per position. These optimum values are expressed as a function of the mean new target appearance rate. The proposed alert-confirm detection increases the maximum detection range even with a shorter frame time than that of uniform scanning.

• Journal of Environmental Health Sciences
• /
• v.22 no.1
• /
• pp.36-44
• /
• 1996

A comparison was made of two detection methods(UV absorbence detection and fluorescence detection with pre-column derivatization, with trifluoroacetic acid) coupled with HPLC for the simultaneous determination of aflatoxin $B_1, B_2, G_1$ and $G_2$. A good separation of the four aflatoxins was achieved on a reversed-phase $C_{18}$ column (30 cm x 3.9 mm) with methanol-acetonitrile-water(20+20+60) for absorbence detection or acetonitrile-water(25+75) for fluorescence detection at the flow rate of 1.0 ml/min. The calibration graphs were linear over the ranges 100 ppb-1 ppm for $B_1/G_1$ and 30~300 ppb for $B_2/G_1$ with absorbence detection, and 1~500 ppb for $B_1/G_1$ and 0.3~150 ppb for $B_2/G_2$ with fluorescence detection. The correlation coefficients were greater than 0.94 and 0.99 for absorbance detection and for fluorescence detection, respectively. The detection limit was 100 ng for $B_1/G_1$ and 30 ng for $B_2/G_2$ with absorbence detection, and 1 ng for $B_1/G_1$ and 0.3 ng for $B_2/G_2$ with fluorescence detection. Recovery rates of aflatoxin $B_1, B_2, G_1$ and $G_2$ added to yeast-extract sucrose broth medium were 66.6%, 59.4%, 67.5% and 59.2%, respectively, for absorbence detection and 82.9%, 71.5%, 80.0% and 69.3%, respectively, for fluorescence detection. The four aflatoxins in culture medium were quantitatively detected by the two methods. The aflatoxins in the rice sample were not detected the absorbence detection method, but were below 10 ppb using the fluorescence detection method. Analysis of aflatoxins by both the absorbence and fluorescence methods coupled with HPLC showed acceptable linearity and good recovery. The absorbence detection was less timeconsuming and safer for treatment. The fluorescence detection was more elective and sensitive though elevated $B_1$ and $G_1$ contents were determined from the TFA-induced conversion of $B_1$ to $B_{2a}$ and $G_1$ to $G_{2a}$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.461-469
• /
• 2010

In this paper, we have proposed an improved fusion method of detection features which can enhance the detection probability under the given false alarm rate in the prescreening stage of SAR ATR(Synthetic Aperture Radar Automatic Target Recognition) system. Since the detection features have the positive correlation, the detection performance can be improved if the joint probability distribution of detection features is considered in the fusion process. The detection region is designed as a simple piecewise linear function which can be represented by few parameters. The parameters for the detection region can be derived by training the sample SAR images to maximize the detection probability with the given false alarm rate. Simulation result shows that the detection performance of the proposed method is improved for all combinations of detection features.

• Journal of Multimedia Information System
• /
• v.8 no.3
• /
• pp.159-166
• /
• 2021

COVID-19 has dramatically changed people's daily life. Wearing masks is considered as a simple but effective way to defend the spread of the epidemic. Hence, a real-time and accurate mask wearing detection system is important. In this paper, a deep learning-based mask wearing detection system is developed to help people defend against the terrible epidemic. The system consists of three important functions, which are image detection, video detection and real-time detection. To keep a high detection rate, a deep learning-based method is adopted to detect masks. Unfortunately, according to the suddenness of the epidemic, the mask wearing dataset is scarce, so a mask wearing dataset is collected in this paper. Besides, to reduce the computational cost and runtime, a simple online and real-time tracking method is adopted to achieve video detection and monitoring. Furthermore, a function is implemented to call the camera to real-time achieve mask wearing detection. The sufficient results have shown that the developed system can perform well in the mask wearing detection task. The precision, recall, mAP and F1 can achieve 86.6%, 96.7%, 96.2% and 91.4%, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2341-2350
• /
• 2012

Face detection is the first step of vision-based driver fatigue detection method. Traditional face detection methods have problems of high false-detection rates and long detection times. A space-time restrained Adaboost method is presented in this paper that resolves these problems. Firstly, the possible position of a driver's face in a video frame is measured relative to the previous frame. Secondly, a space-time restriction strategy is designed to restrain the detection window and scale of the Adaboost method to reduce time consumption and false-detection of face detection. Finally, a face knowledge restriction strategy is designed to confirm that the faces detected by this Adaboost method. Experiments compare the methods and confirm that a driver's face can be detected rapidly and precisely.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.63-68
• /
• 2022

In this study, we produced defect detection models using parallel convolution neural networks. If convolution neural networks are constructed parallel type, the model's detection accuracy will increase and detection time will decrease. We produced parallel-type defect detection models using 4 types of convolutional algorithms. The performance of models was evaluated using evaluation indicators. The model's performance is detection accuracy and detection time. We compared the performance of each parallel model. The detection accuracy of the model using AlexNet is 97 % and the detection time is 0.3 seconds. We confirmed that when AlexNet algorithm is constructed parallel type, the model has the highest performance.

• Journal of Information Processing Systems
• /
• v.8 no.3
• /
• pp.399-408
• /
• 2012

Hand gesture recognition is an important area of research in the field of Human Computer Interaction (HCI). The geometric attributes of the hand play an important role in hand shape reconstruction and gesture recognition. That said, fingertips are one of the important attributes for the detection of hand gestures and can provide valuable information from hand images. Many methods are available in scientific literature for fingertips detection with an open hand but very poor results are available for fingertips detection when the hand is closed. This paper presents a new method for the detection of fingertips in a closed hand using the corner detection method and an advanced edge detection algorithm. It is important to note that the skin color segmentation methodology did not work for fingertips detection in a closed hand. Thus the proposed method applied Gabor filter techniques for the detection of edges and then applied the corner detection algorithm for the detection of fingertips through the edges. To check the accuracy of the method, this method was tested on a vast number of images taken with a webcam. The method resulted in a higher accuracy rate of detections from the images. The method was further implemented on video for testing its validity on real time image capturing. These closed hand fingertips detection would help in controlling an electro-mechanical robotic hand via hand gesture in a natural way.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.2
• /
• pp.100-105
• /
• 2022

This paper applies the arc detection algorithm to prevent the false detection in photo voltaic series arc detection circuit, which is required not only to detect the series arc quickly, but also not falsely detect the arc for the non-arc noise. For this purpose, this study proposes a rapid and preventive false detection method of single peak noise and short noise signals. First, to prevent false detection by single peak noise, Discrete wavelet transform (DWT)-based characteristic parameters are applied to determine the shape and the amplitude of the noise. In addition, arc fault detection within a few milliseconds is performed with the DWT iterative algorithm to quickly prevent false detection for short noise signals, considering the continuity of serial arc noise. Thus, the method operates not only to detect series arc, but also to avoid false arc detection for peak and short noises. The proposed algorithm is applied to real-time serial arc detection circuit based on the TMS320F28335 DSP. The serial arc detection and peak noise filtering performances are verified in the built simulated arc test facility. Furthermore, the filtering performance of short noise generated through DC switch operation is confirmed.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.149-156
• /
• 2019

The existing subtract image based intrusion detection system for CCTV digital images has a problem that it can not distinguish intruders from moving backgrounds that exist in the natural environment. In this paper, we tried to solve the problems of existing system by designing real - time intrusion detection system for CCTV digital image by combining subtract image based intrusion detection method and background learning artificial neural network technology. Our proposed system consists of three steps: subtract image based intrusion detection, background artificial neural network learning stage, and background artificial neural network evaluation stage. The final intrusion detection result is a combination of result of the subtract image based intrusion detection and the final intrusion detection result of the background artificial neural network. The step of subtract image based intrusion detection is a step of determining the occurrence of intrusion by obtaining a difference image between the background cumulative average image and the current frame image. In the background artificial neural network learning, the background is learned in a situation in which no intrusion occurs, and it is learned by dividing into a detection window unit set by the user. In the background artificial neural network evaluation, the learned background artificial neural network is used to produce background recognition or intrusion detection in the detection window unit. The proposed background learning intrusion detection system is able to detect intrusion more precisely than existing subtract image based intrusion detection system and adaptively execute machine learning on the background so that it can be operated as highly practical intrusion detection system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.3
• /
• pp.135-144
• /
• 2003

An intrusion detection system shows different result over overall detection area according to its detection characteristics of inner detection algorithms or techniques. To expand detection areas, we requires an integrated detection which can be archived both by deploying a few detection systems which detect different detection areas and by combining their results. In addition to expand detection areas, we need to decrease the workload of security managers by false alarms and improve the correctness by minimizing false alerts which happen during the process of integration. In this paper, a method for aggregation detection use fuzzy inference to integrate a vague detection results which imply the characteristics of detection systems. Their analyzed detection characteristics are expressed as fuzzy membership functions and fuzzy rule bases which are applied through the process of fuzzy control. And, it integrate a vague decision results and minimize the number of false alerts by reflecting the characteristics of detection systems. Also it does minimize inference objects by applying thresholds decided through several experiments.