Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of chemical surface treatment on the shear bond Strength of denture reliners and denture base resin

화학적 표면처리에 따른 의치상 레진과 이장재 간의 전단 결합강도

  • Choi, Esther (Dept. of Dental Laboratory Technology, Hyejeon Collage) ;
  • Kwon, Eun-Ja (Dept. of Dental Laboratory Technology, Hyejeon Collage)
  • Received : 2013.10.04
  • Accepted : 2013.11.07
  • Published : 2013.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study was to evaluate the effect of the surface treatment of MMA and TEGDMA concentration, silane coupling agent on the shear bond strength of denture base resin and denture reliners. Denture base resin surface was treated with MMA and TEGDMA concentration, silane coupling agent. After denture reliners were injected bond strength was measured. The results of MMA and TEGDMA concentration on the shear bond strength of Vertex self curing resin showed that the value of MMA 95% and TEGDMA 5%, MMA 90% and TEGDMA 10%, MMA 80% and TEGDMA 20% groups were higher than that of other group(P<0.05). MMA and TEGDMA concentration on the shear bond strength of Kooliner resin showed that the value of MMA 95% and TEGDMA 5%, MMA 90% and TEGDMA 10% were higher than that of other group(P<0.05). Silane coupling agent on the shear bond strength of Vertex self curing resin and Kooliner showed that the value of MMA 95% and silane coupling agent 5% groups was higher than that of other group(P<0.05). Therefore, we could conclude that appropriate chemical surface treatments are supposed to affect the bond of denture base resin and denture reliners.

본 논문은 monomer에서 결합증진에 많은 역할을 하는 MMA와 TEGDMA의 농도별 표면 처리와 silane coupling agent로 표면 처리한 것이 의치상 레진과 이장재간의 결합력에 미치는 영향에 대해 알아보고자 하였다. 의치상 레진에 MMA와 TEGDMA의 농도별 표면 처리와 silane coupling agent로 표면처리 후 이장재를 주입하여 전단결합강도를 측정하였다. MMA와 TEGDMA의 농도별 표면 처리에 따른 의치상 레진과 이장재간의 전단결합강도에서는 Vertex self curing resin에서 95%, 90%, 80%, Kooliner에서는 95%, 90%에서 유의적으로 높게 나타났다(P<0.05). 또한, silane coupling agent 5%로 표면 처리한 그룹이 Vertex self curing resin과 Kooliner 모두에서 전단결합강도가 유의적으로 높게 나타났다(P<0.05). 따라서 적절한 화학적 표면 처리는 의치상 레진과 이장재간의 결합력 증가에 영향을 미치리라 사료된다.

Keywords

References

  1. E. J. Nam, "A study for bond strengths of acrylic and silicone based soft lining materials", Dankook University, 1999.
  2. Jeong CM, "Atlas of Chairside Relining Technique", Seoul: Shinhung, 5-12, 2001.
  3. Kim GS, "The effect of denture cleansers on the bond strength and the surface hardness of reline resin to denture base resin", J Korean society Dent Prosthet, 41,4, 493-502, 2003.
  4. Y. M. Kim, "The study on the physical property of the permanent soft denture liners", Chonnam National University, 1999.
  5. Ducan JD, Clark LL, "The use of a soft denture liner for chronic residual ridge soreness", J Am Dent Assoc, 111:64-65, 1985. https://doi.org/10.14219/jada.archive.1985.0073
  6. Kawano F, Dootz ER, "Comparison of bond strength of six soft denture liners to denture base resin", J Prosthet Dent, 68:368-371, 1992. DOI: http://dx.doi.org/10.1016/0022-3913(92)90347-D
  7. Sarac YS, Basoglu T, Ceylan GK, Sarac D, Yapici O, "Effect of denture base surface pretreatment on microleakage of a silicone-based resilient liner", J Prosthet Dent, 92:283-7, 2004. DOI: http://dx.doi.org/10.1016/j.prosdent.2004.06.004
  8. C. M. Jeong, "Effect of resin surface primers used for bonding chair-side relining resin to thermoplastic denture base resin", J Korean society Dent Mater 28(4) :359-366, 2001.
  9. Chung CH, "Complete denture prosthodontics", Seoul:Jisung, 1:496-499, 1994.
  10. Ogle RE, Sorensen SE, Lewis EA, "A new visible light cured resin system applied to removable prosthodontics", J Prosthet Dent, 56:497-506, 1986. DOI: http://dx.doi.org/10.1016/0022-3913(86)90397-5
  11. M. C. Yoon, "Effect of denture base surface treatments on the tensile bond strength between a resilient liner and a processed denture base resin", Pusan National University, 2007.
  12. Takahashi Y, Chai J, "Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin", Int J Prosthodont, 14(6):531-5, 2001.
  13. Siddesh CS, Aras MA, "In vitro evaluation of transverse strength of repaired heat cured denture base resins with and without surface chemical treatment", J Oral Prosthodont, 8:87-93, 2008.
  14. Canan B, "Flexural properties of repaired heat-polymerising acrylic resin after wetting with monomer and acetone", Gerodontology, 27:217-223, 2010. DOI: http://dx.doi.org/10.1111/j.1741-2358.2009.00321.x
  15. Debora B. B, "Effect oh monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material", Gerodontology, 26:225-231, 2009. DOI: http://dx.doi.org/10.1111/j.1741-2358.2008.00262.x
  16. Hiroshi S, "Effect of surface preparation using ethyl acetate on repair strength of denture base resin", Acta Odontol Scand, 64(3):159-63, 2006. DOI: http://dx.doi.org/10.1080/00016350500514808
  17. C. R. Leles, "Bonding strength between a hard chairside reline resin and a denture base material as infuenced by surface treatment", J Oral Rehabil, 28(12):1153-7, 2001 DOI: http://dx.doi.org/10.1046/j.1365-2842.2001.00786.x
  18. Daniel MW, Francis LF, "Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxysilane-modified colloidal silica coatings" J colloid interface sci, 205(1):191-200, 1998. DOI: http://dx.doi.org/10.1006/jcis.1998.5671
  19. Della Bona A, Anusavice KJ, Shen C, "Microtensile strength of composite bonded to hot-pressed ceramics", J Adhes Dent, 2(4):305-13, 2000.
  20. Ortman HR, Ortman LF, "Denture refitting with today's concepts and materials", Dent Clin North Am, 19:269-290, 1975.
  21. Ruyter IE, Svendsen SA, "Flexural properties of denture base polymers", J Prosthet Dent, 43:95-104, 1980. DOI: http://dx.doi.org/10.1016/0022-3913(80)90362-5
  22. Cucci AL, Vergani CE, Giampaolo ET, Maria C, "Water sorption, solubility and bond strength of two autopolymerizing acrylic resins and one heat polymerizing acrylic resins", J Prosthet Dent, 80:434-438, 1998. DOI: http://dx.doi.org/10.1016/S0022-3913(98)70008-3
  23. S. Y. Kim, "The change in transverse strength of denture base after reline procedure", Chonnam National University, 1999.
  24. Khan Z, Fraunhofer JA, Razavi R, "The staining characteristics transverse strength and micro hardness of a visible light cured denture material", J Prosthet Dent, 57:384-386, 1987. DOI: http://dx.doi.org/10.1016/0022-3913(87)90319-2
  25. H. Y. Na, "Effect of crosslinking agent on the adhesion of barbituric acid-initiated resin to dentin", J Korean society Dent Mater 28(2) :139-144, 2001.
  26. Matinlinna JP, Ozcan M, Lassila LV, Vallittu PK, "The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titaniummetal", Dent Mater, 20(9):804-13, 2004. DOI: http://dx.doi.org/10.1016/j.dental.2003.10.009
  27. Clancy JM, Boyer DB, "Comparative bond strengths of light-cured, heat-cured, and autopolymerizing denture resins to denture teeth", J Prosthet Dent, 61(4):457-62, 1989. DOI: http://dx.doi.org/10.1016/0022-3913(89)90014-0
  28. Shen C, Colaizzi FA, Birns B, "Strength of denture repairs as influenced by surface treatment", J Prosthet Dent, 52(6):844-8, 1984. DOI: http://dx.doi.org/10.1016/S0022-3913(84)80016-5
  29. Vallittu PK, Ruyter IE, "Swelling of poly(methyl methacrylate) resin at the repair joint" Int J Prosthodont, 10(3):254-8, 1997.
  30. Satas D, Handbook of pressure sensitive adhesive technology(2nd Ed.), 124-127, New York:Van Nostrand Reinhold, 1989.
  31. International Organization for standardization ISO 29022, "Dentistry-Dentistry-Adhesion-Notched edge shear bond strength test", Geneva: Switzerland, ISO, 2013.