DOI QR코드

DOI QR Code

전기 피드백 직동형 서보 밸브에 관한 역 분석

Reverse Analysis on a Direct Dive Servo Valve with Electric Feedback

  • Kim, S.D. (Department of Intelligent Mechanical Engineering, Kumoh National Institute of Technology) ;
  • Ahn, H.W (School of Electronic Engineering, Kumoh National Institute of Technology)
  • 투고 : 2013.10.30
  • 심사 : 2013.11.29
  • 발행 : 2013.12.01

초록

Mechanical and electrical properties of a DDV(Direct Drive servo Valve) with electric feedback are analysed via reverse analysis technique in this work. The DDV is disassembled and mechanical parameters, such as spool mass, spring stiffness and port size are identified. The servo amplifier, which is built in the valve, is reversely analysed and the control scheme and gains for several control actions are also identified. The electrical feedback for spool displacement improves much better the valve performance, such as hysteresis and dynamic bandwidth frequency, than an ordinary mechanical feedback valve. Integrating control action with very large gain was adopted in the valve amplifier, and it seemed to give high performance.

키워드

참고문헌

  1. I. Lee and Education Division of Bosch Rexroth Korea, "Hydraulic Engineering", Munundang. Co. kr, Seoul Korea, 2012 August.
  2. Moog Industrial Controls Division, "D633 and D634 Series Direct Drive Servo-Proportional Control Valves with integrated 24V Electronics, ISO 4401 Size 03 and 05", Moog Inc, New York USA.
  3. M. Galal Rabie, "Fluid Power Engineering", McGraw-Hill Companies, New York USA, 2009.
  4. Urata, E. "Study of Magnetic Circuits for Servovalve Torque Motor", Bath Workshop on Power Transmission and Control (PTMC00), 269-282, 2000.
  5. H. E. Merritt "Hydraulic Control System", Wiley and Sons, New York, pp.79-91. 1967.
  6. D. T. Kim and S. K. Lee, "Pressure Ripple Reduction in High Speed On-Off Solenoid Valves Driven by PWM Control", Transactions of the Korea Fluid Power Systems Society, Vol. 2 No. 2, 2005
  7. K. Ogata, "Modern Control Engineering", Prentice-Hall Inc., London, pp.216-282, 1970.
  8. Ziegler, J. G. and N. B. Nichlos, "Optimum Settings for Automatic Controllers", Trans. ASME 64:759-768, 1942.
  9. Astrom, K. J. and T. Hagglund, "Automatic Tuning of Simple Regulators with Specifications on Phase and Amplitude Margins", Automatica 20: 645-651, 1984. https://doi.org/10.1016/0005-1098(84)90014-1