DOI QR코드

DOI QR Code

유압 윈치를 이용한 선박 자동 계선법

Proposition of Automatic Ship Mooring Using Hydraulic Winch

  • Hur, J.G. (Department of Power System Engineering, Chonnam National University) ;
  • Yang, K.U. (School of Marine Technology, Chonnam National University)
  • 투고 : 2013.10.04
  • 발행 : 2013.12.01

초록

The numerical analysis of the automatic ship mooring system which was equipped in the ship for trying to berth at the pier was performed in this study. The automatic ship mooring using hydraulic winch was a new method that had not need to change the existing devices and to help a pilot ship of outside. The numerical results of the proposed mooring system including ship motion were that the speed and rolling phenomenon of ship was affected by changing in the ship weight and affected the slope maintenance and yaw degree of ship if there has a trim of stern. Also, a static force of ship at the initial movement was important to calculate the mooring power. The moving force and inertial force of ship on the vertical direction was confirmed for the mooring stability. Therefore, the power and velocity of hydraulic mooring winch should be determined by considering the significant characteristics such as weight, velocity, inertial force and moving force of ship.

키워드

참고문헌

  1. N. Mort, D. Linkens, "Self-Tuning Controller for Surface Ship Course and Track-Keeping", In Proceedings, Symposium on Ship Steering Automatic Control, Genova, Italy, pp.175-188, 1980.
  2. R. Burns, "The use of artificial neural networks for the intelligent optimal control of surface ships", Oceanic Engineering, IEEE Journal, Vol. 20, No. 1, pp.65-72, 1995. https://doi.org/10.1109/48.380245
  3. N. Khaled, N. Chalhoub, "A self-tuning guidance and control system for marine surface vessels" Nonlinear Dyn., Vol. 1, No. 10, 2013. doi:10.1007/s11071-013-0840-9
  4. A. B. Birn, Ship Hydrostatics and Stability, Elsevier Butterworth-Heinemann, UK, pp.23-70, 121-156, 2005.
  5. S. K. Das, S. N. Das,"Modeling and analysis of coupled nonlinear oscillations of a floating body in two degrees of freedom", Acta Mechanica, Vol. 181, No.1-2, pp.31-42, 2006. doi:10.1007/s00707-005-0277-4
  6. K. U. Yang, J. G. Hur, "Numerical Analysis of Proportional Pressure Control Valve using Bondgraph", Journal of KOPSE, Vol.12, No.2, pp.62-70. 2008.

피인용 문헌

  1. A Ship Berthing System Design by Cooperating with Tugboats and Dampers vol.11, pp.3, 2014, https://doi.org/10.7839/ksfc.2014.11.3.007