DOI QR코드

DOI QR Code

산화에스테르전분을 이용한 표면사이징 공정의 건조에너지 저감

Reduction of Drying Energy for After Dryers Using Oxidized Starch Ester

  • 정영빈 (서울대학교 농업생명과학대학 산림과학부) ;
  • 이학래 (서울대학교 농업생명과학대학 산림과학부) ;
  • 윤혜정 (서울대학교 농업생명과학대학 산림과학부) ;
  • 정광호 (서울대학교 농업생명과학대학 산림과학부) ;
  • 지경락 (삼양제넥스(주) 연구소) ;
  • 김영석 (삼양제넥스(주) 연구소)
  • Jeong, Young Bin (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Lee, Hak Lae (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Youn, Hye Jung (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Jung, Kwang Ho (Department of Forest Sciences, College of Agriculture and Life Sciences, Seoul National University) ;
  • Ji, Kyoung Rak (Samyang Genex Co. R&D center) ;
  • Kim, Young Seok (Samyang Genex Co. R&D center)
  • 투고 : 2013.07.09
  • 심사 : 2013.07.30
  • 발행 : 2013.08.30

초록

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

키워드

참고문헌

  1. Maurer, Hans W.(ed.), Starch and starch products in surface sizing and paper coating, TAPPI Press, Atlanta, p. 34, p. 83 (2001).
  2. Remmer, J., and Eklund, D.E., Absorption of starch during surface sizing with different methods, 1991 TAPPI Coating Conference Proceedings, TAPPI Press, Atlanta, pp. 285-291.
  3. Felder, H., Sizing of woodfree papers with a pre-metering size press, 1991 TAPPI Coating Conference Proceedings, TAPPI Press, Atlanta, pp. 267-273.
  4. Lee, H.L. et al., Influence of the viscosity of surface sizing starch solutions on surface sizing effect of linerboard, J. Korea TAPPI 44(5):54-62 (2012). https://doi.org/10.7584/ktappi.2012.44.5.054
  5. Brander, J. and Thorn, I., Surface application of paper chemicals, London, Blackie Academic & Professional, pp. 76-82 (1997).
  6. Aloi, F., Trksak, R. M., and Mackewicz, V., A different way to look at surface starch for improved film formation and barrier properties, 2000 Papermakers Conference Proceedings, TAPPI Press, Atlanta.
  7. Jopson, R. N., Size press and sheet penetration, Paper $360^{\circ}$ July/August, pp. 24-25 (2010).

피인용 문헌

  1. 에테르화 및 에스테르화를 통한 표면사이징용 변성 전분의 제조 vol.46, pp.6, 2014, https://doi.org/10.7584/ktappi.2014.46.6.050