• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.9-15
• /
• 2013

An oxidized starch ester was prepared and used for surface sizing. Esterification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14% to 16%. Surface sizing with the esterified starch gave better performance in tensile strength, stiffness and compressive strength than surface sizing with oxidized starch in the laboratory. Advantages in strength improvement, however, were not obtained when it was applied in commercial papermaking process. This was attributed to the fact that the influence of starch types has been nullified by high pressure penetration that occurs in the commercial papermaking process. Drying energy consumption, however, decreased by 3.3% by substituting the low solids oxidized starch with a high solids starch ester.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.21-26
• /
• 2013

The effect of esterified starch as surface sizing agent for inkjet printing paper has been evaluated and compared with oxidized starch. Also the influence of various additives including cationic poly-DADMAC, stearic acrylic copolymer, calcium chloride, and GCC was examined. Results showed that starch ester gave higher ink density than oxidized starch. Addition of poly-DADMAC improved water fastness. In general, low molecular weight poly-DADMAC performed better than high molecular weight one, and it was attributed to the fact that it gave more uniform film forming characteristics in surface sizing. Use of styrene acrylic acid copolymer increased hydrophobicity of the paper surface, but it did not increase the ink density. Use of GCC and calcium chloride had only marginal effect on printing quality.

• Food Quality and Culture
• /
• v.3 no.2
• /
• pp.53-58
• /
• 2009

This study was conducted to investigate the quality characteristics of frozen stored mungbean starch gels added with sucrose fatty acid ester (SE). The study showed a delay of gelatinization of mungbean starch by SE addition through the measurements conducted by using Rapid Visco Analyzer (RVA) and Differential Scanning Calorimeter (DSC). In the color of SE added frozen stored gels, lightness (L) and yellowness (b) values were increased compared to those of values measured from freshly prepared gel, whereas redness (a) value was decreased. The addition of 1% SE on mungbean starch gel prevented the color change during frozen storage. Rupture stress and rupture energy of frozen stored gel was higher than those of freshly prepared gel, whereas rupture strain of frozen stored gel was lower than that of freshly prepared gel. The addition of 1% SE on mungbean starch gel prevented the change of rupture characteristics during frozen storage. Texture profile analysis(TPA) characteristics revealed a significant change of the gel texture during frozen storage by showing an increase of hardness of the frozen stored gels compared to the freshly prepared gels with newly discovered fracturability, which resulted to show a large difference of gel texture by showing the disappearance of adhesiveness and large reduction of cohesivenes. The addition of 1% SE on mungbean starch gel prevented the change of TPA characteristics during frozen storage. Scanning electron micrographs showed that network structure of frozen stored gel was more rough than that of freshly prepared gel, and the addition of 1% SE on mungbean starch gel could suppress the breakdown of network structure. Thus the addition of 1.0% SE on mungbean starch gel was appropriate method for remaining gel characteristics during frozen storage.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.116-121
• /
• 1991

The effects of water contents and surfactants, sodium stearoyl-lactylate, sucrose ester and distilled monoglyceride(Dimodan) on wheat starch gelatinization and retrogradation were studied by differential scanning calorimetry. The endothermic peak patterns of starch varied with water content of starch. When water content was less than 30%, gelatinization did not occur. The onset temperature of gelatinization peak of native starch was $59{\sim}60^{\circ}C$ and that of endothermal peak of retrograded starch was $50{\sim}55^{\circ}C$. The enthalpy value of retrograded starch were greatest in the $40{\sim}50%$ water content. In the presence of surfactants, gelatinization temperatures shifted slightly to higher temperatures. DSC endothermal enthalpies of the amylose-lipid complex increased. The degree of retrogradation in starch was lower with surfactant than without surfactant, but enthalpy of amylose-lipid complex did not change during storage.

• Journal of the Korean Home Economics Association
• /
• v.42 no.2
• /
• pp.213-227
• /
• 2004

This study was attempted to investigate the sensory and textural characteristics of mungbean starch gels with soy bean oil and sucrose fatty acid ester(SE) addition during room temperature storage. Freshly prepared mungbean starch gels, with and without soy bean oil and SE, were stored at 25$^{\circ}C$ for 24, 48 and 72 hours. The color value, syneresis, texture and sensory properties of the gels were measured. The lightness(L) of the gels with soy bean oil and without additives was similar whereas that with SE was lower than that without additives. Syneresis of the gels with soy bean oil and SE was lower than that without additives. Rupture stress, rupture strain and rupture energy of the freshly prepared gel with 2∼4% soy bean oil were increased, but there were no differences in rupture properties between the gel with soy bean oil and that without additives. Rupture stress, rupture stain and rupture energy of all the gels with SE were decreased. Addition of soy bean oil to the gel did not change the texture profile of the gel, whereas hardness, springiness and chewiness of the gel with SE were decreased. In sensory evaluation, the acceptability of freshly prepared gel with soy bean oil was similar to that without additives, whereas that of the gel with 2% soy bean oil stored for 24 hours was higher than that without additives. The acceptability of the gel with SE was decreased significantly.

• Korean journal of food and cookery science
• /
• v.8 no.3
• /
• pp.255-263
• /
• 1992

Pasting characteristics and amylose-surfactant complex forming ability of sweet potato starch were investigated after defatting and the addition of surfactants, such as SSL (sodium steamyl-2-lactylate) Dimodan (mono/di glyceride) and SE (sucrose ester) with different concentrations. All starch granules were smooth and round, there were no damages to starch granules after defatting and surfactant addition. amylose content of surfactant added stach decreased and me order of decrease was SSL, SE and Dimodan. The cornplex forming ability of SE added starch increased according to increasing HLB value. As surfactants concentration increased, amylose complex formig ability increased. In case of gelatinization patterns by amylograph, the initial pasting temperature of surfactant added starches was higher than mat of untreated or defatted starches, but viscosity at each temperature were all decreased. Soluble carbohydrate and leached amylose of starches increased at increasing temperature, those of surfactant added starches decreased at each temperature in the order of SSL, SE and Dimodan.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.193-199
• /
• 1996

Effects of addition of various additives, sucrose fatty acid ester 1170 (SE), carboxymethyl cellulose (CMC) and soy bean oil (SO) on textural characteristics for untreated and defatted corn and mung bean starch gels stored at room temperature for 24 hrs and 72 hrs were studied. In sensory and instrumental characteristics of starch gels with additives (0.5% for starch basis), the acceptability was highly correlated with cohesiveness and bend property of starch gels stored 24 hrs and springiness, cohesiveness, color, smoothness, bend property, hardness and clarity of starch gels stored 72 hrs. Regardless of adding additives, textural characteristics of defatted corn starch gels showed somewhat higher values than that of com starch gels. The acceptability of starch gels with additives was somewhat lowered in all the cases, which showed highly correlated in cohesiveness for 24 hrs and springiness for 72 hrs. Instrumental characteristics were similar to those of sensory evaluation, which showed no significant difference with additives.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.463-471
• /
• 1994

Physicochemical properties, gelatinization and retrogradation characteristics of surfactant added sweet potato starches were investigated. Three different surfactants, SSL (sodium stearoyl-2-lactylate), Dimodan (mono/diglyceride) and SE1670 (sucrose fatty acid ester 1670) were used. Shapes and crystallinities of starch granules were not changed by the addition of surfactants. Total lipid contents increased and the amylose content decreased by the addition of surfactants and the order was as follows: SE1670>SSL>Dimodan. The swelling power and solubility at $80^{\circ}C$ decreased in the surfactant added starches. By amylograph, initial gelatinization temperature of untreated sweet potato starch was $72.5^{\circ}C$, and did not change by the addition of surfactants, but SE1670 or Dimodan added starch showed the peak viscosity. The peak temperature of gelatinization and enthalpy of untreated starch by DSC were $53.9^{\circ}C$ and 1.3cal/g, respectively. The peak temperature increased by the addition of surfactants, while the enthalpy decreased. In gelatinization by alkali, the viscosity was lower in surfactant added starches than in untreated starch at concentration. The degree of retrogradation by ${\alpha}-amylase-iodine$ method was a lower in SSL and SE1670 added starches than untreated starch and the enthalpy by DSC also decreased in surfactant added and retrograded starches.

• Food Science and Biotechnology
• /
• v.18 no.5
• /
• pp.1230-1236
• /
• 2009

Optimum conditions for the freeze-thaw stability (FTS) of mung bean starch (MBS) paste as a main ingredient in omija-eui were investigated. For the optimization of the paste preparation condition, the FTS of MBS prepared by boiling in a shaking water bath (BMSW) or by pressure-cooking in an autoclave (PCMA) were analyzed using a response surface methodology (RSM). In addition, the effects of various additives such as gums, sugars, and emulsifier were evaluated on the FTS of MBS paste prepared under optimal conditions. The predicted maximal FTS of MBS paste prepared by the PCMA method (73%) was higher than that of the paste prepared by the BMSW method (36%). In case of additives, gellan gum and sodium alginate effectively prevented the syneresis of MBS paste in the BMSW method and in the PCMA method, respectively. The use of a fructose fatty acid ester as an emulsifier decreased syneresis in a dose-dependent, while the addition of sugars accelerated syneresis. Consequently, MBS paste for omija-eui preparation may be efficiently prepared by adding sodium alginate and fructose fatty acid ester under the optimal conditions of 4.3% MBS content, $121^{\circ}C$ heating temperature, and $89^{\circ}C$ cooling temperature by pressure-cooking in an autoclave.

• Korean journal of food and cookery science
• /
• v.13 no.2
• /
• pp.185-191
• /
• 1997

The effects of five hydrated emulsifiers with or without specified proteins (flour, egg) and/or polydextrose on the reduced-calorie cake as baked product model systems were compared. The small molecule amphiphiles (SMA) used were monoglycerides (MG), sorbitan monostearate (SMS), polysorbate (PS) 60, sucrose ester (SE) F7O, and SE Fl60. All flour batters with each emulsifier and supplements had similar low foam drainages (0.00∼1.03$m\ell$) indicating those systems were fairly stable in the presence of flour protein. The cake batter using starch instead of flour without egg and polydextrose and with some emulsifiers had relatively large amount of drainages (4.20∼5.87$m\ell$). When the egg and polydextrose were added to the blank cake batters using starch, foam drainages tended to show relatively low scores (0.13∼1.48$m\ell$) indicating the cake batter dispersion system is stabilized. Starch cakes made with SE F70 without egg or polydextrose(blank) unexpectedly had high volume index of 199.