• Advances in environmental research
• /
• v.3 no.3
• /
• pp.199-206
• /
• 2014

Dewatering is an extremely important step in wastewater treatment process to reduce the final sludge volume in order to minimize the cost of sludge transportation and disposal. In the present study, the effect of different sludge solids content (1, 2 and 3.8%) on the dewaterability of anaerobically digested sludge using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was studied. The pH reduction rate was higher during initial process in the sludge having low solids content, but after 48 h of bioleaching, similar pH of below 3 was observed with all the different solids content. Bio-oxidation rate of $Fe^{2+}$ was initially higher in sludge with low solids content, but 100% $Fe^{2+}$ was oxidized within 60 h in all the three treatment levels. Compared to the control, specific resistance to filtration was reduced by 75, 78 and 80% in the sludge with a solids content of 1, 2 and 3.8% respectively, showing improvement in dewaterability with an increase in sludge solids content. Sludge effluent quality and sludge settling rate were also improved in treatments with higher solids content after the bioleaching process.

• Journal of Biosystems Engineering
• /
• v.23 no.6
• /
• pp.561-570
• /
• 1998

The MLR(Multiple Linear Regression) models to estimate soluble solids content non-destructively were presented to make a selection of optimal photosensor utilized to measure the soluble solids content of apples. Visible and NIR absorbance in the 400 to 2498 nanometer(nm) wavelength region, soluble solids content(sugar content), hardness, and weight were measured for 400 apples(gala). Spectrophotometer with fiber optic probe was utilized for spectrum measurement and digital refractometer was used for soluble solids content. Correlation between absorbance spectrum and soluble solids content was analyzed to pick out the optimal wavelengths and to develop corresponding prediction model by means of MLR. For the coefficient of determination($R^2$) to be over 0.92, the MLR models out of the original absorbance were built based on 7 wavelengths of 992, 904, 1096, 1032, 880, 824, 1048nm, and the ones of the second derivative absorbance based on 5 wavelengths of 784, 1056, 992, 808, 872nm. The best model of the second derivative absorbance spectrum had $R^2$=0.91, bias= -0.02bx, SEP=0.28bx for unknown samples.

• Korean Journal of Plant Resources
• /
• v.28 no.3
• /
• pp.329-332
• /
• 2015

The effect of storage temperature and the storage period of hardy kiwifruits on the fruit firmness, soluble solids and fruit weight were studied in this work. The investigation was carried out on the Sae-Han cultivar of Actinidia arguta. It has an edible smooth skin and contains high amounts of sugar and vitamin C (ascorbic acid). In this research, the measurement of fruit firmness, soluble solids, and fruit weight were carried out at various temperatures (5, 10, 15, and 20℃) during 14 days. Fruit firmness rapidly decreased and soluble solids content increased at 15 and 20℃. We also investigated the correlation between fruit firmness and soluble solids content. There was a strong correlation between fruit firmness and soluble solids content. That means that fruit firmness affect the soluble solids content of hardy kiwifruit.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.67-75
• /
• 2007

As a part of abating the formaldehyde emission of urea-formaldehyde (UF) resin adhesive by lowering formaldehyde to urea (F/U) mole ratio, this study was conducted to investigate properties of UF resin adhesive with different F/U mole ratios. UF resin adhesives were synthesized at different F/U mole ratios of 1.6, 1.4, 1.2, and 1.0. Properties of UF resin adhesives measured were non-volatile solids content, pH level, viscosity, water tolerance, specific gravity, gel time and free formaldehyde content. In addition, a linear relationship between non-volatile solids content and sucrose concentration measured by a refractometer was established for a faster determination of the non-volatile solids content of UF resin. As F/U mole ratio was lowered, non-volatile solids content, pH, specific gravity, water tolerance, and gel time increased while free formaldehyde content and viscosity were decreased. These results suggested that the amount of free formaldehyde strongly affected the reactivity of UF resin. Lowering F/U mole ratio of UF resin as a way of abating formaldehyde emission consequently requires improving its reactivity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.267-272
• /
• 1999

In order to determine the optimum harvest time of vegetable corns, the changes in sugars, soluble solids, and flavor of kernels of sweet (cv. ‘Golden Cross Bantam 70’), super sweet (cv. ‘Cocktail E-51’), and waxy corns (cv. ‘Chalok 2’) were observed at different ripening stages. Sucrose was a major sugar in the sweet and super sweet corns and the content increased from 15 to 21 and 27 days after silking (DAS), respectively and then decreased. Glucose and fructose contents of sweet and super sweet corns tended to decrease with kernel maturity. Total sugar content of the sweet corn analyzed by the anthrone method increased rapidly from 15 to 21 DAS, while that of the super sweet and the waxy corns increased slowly up to 24 and 26 DAS, respectively and decreased thereafter. The content of soluble solids in sweet corn was much higher than that of super sweet corn. Starch content of the sweet corn increased slowly from 15 to 33 DAS, while that of the super sweet corn increased a little rapidly from 15 to 21 DAS and then leveled off to 33 DAS. Starch content of the waxy corn increased continuously from 21 to 38 DAS. There was a positive correlation between the sum of individual sugars (sucrose, glucose, and fructose) and soluble solids in both sweet and super sweet corns, while the content of soluble solids was not related to the sum of individual sugars or total sugars. The flavor rate of sweet and super sweet corns maintained high between 21 and 27 DAS and that of waxy corn decreased from 24 to 33 DAS. The optimum harvest time for sweet, super sweet, and waxy corns was thought to be 21 to 24 DAS considering sugar and starch contents, flavor, and marketing.

• Preventive Nutrition and Food Science
• /
• v.13 no.3
• /
• pp.231-236
• /
• 2008

Response surface methodology (RSM) was used for the analysis and optimization of the production process of strawberry Kochujang. Experiments were carried out according to a central composite design, selecting strawberry puree content and red pepper powder content as independent variables and soluble solids content, moisture content, water activity, color characteristics ($L^*-$, $a^*-$, and $b^*$-values) as response variables. The polynomial models developed by RSM were highly effective for describing the relationships between the study factors and the responses. Kochujang containing a higher amount of red pepper powder had a higher soluble solids content; on the contrary, soluble solids content decreased with the increase in the strawberry puree content in the sample. Moisture content increased with increased strawberry puree content but decreased with increased red pepper powder content. Water activity increased with the increase in strawberry puree content in the sample but was less affected by the amount of red pepper powder content. Decreases in $L^*$-values with increasing amount of red pepper powder were noted. $a^*$-values decreased with the increases in red pepper powder content but increased with the increase in strawberry puree content in the Kochujang formulation. $b^*$-values decreased with the increases in red pepper powder content but was less affected by the strawberry puree content. Overall optimization, conducted by overlaying the contour plots under investigation, was able to point out an optimal range of the independent variables within which the six responses were simultaneously optimized. The point chosen as representative of this optimal area corresponded to strawberry puree content=14.36% and red pepper powder content=11.33%, conditions under which the model predicted soluble solids content=$59.31^{\circ}Brix$, moisture content=45.30% (w.b.), water activity=0.758, $L^*$-value=24.81, $a^*$-value=7.250, and $b^*$-value=10.19.

• Food Science and Preservation
• /
• v.5 no.2
• /
• pp.119-122
• /
• 1998

This study was conducted to blow the effect of postharvest physiological changes on garlic quality according to its ecotypes and storage temperatures. The changes of water, total soluble solids, crude stein, md total fructans were measured and the rates of respiration and sprouting were analyzed during storage at 20$^{\circ}C$ and 30$^{\circ}C$. The decrease of water content and the increase of total soluble solids were reversely appeared during garlic storage. The crude protein content was gradually increased during storage but total fructan content was decrased. The respiration late was maximized at 60days after storage and the spouting rate was gradually increased. In the aspect of ecotypic characteristics, the water content, fructan content and sprouting rate were higher in 'Namdo' cultivar than those of southern type. The high storage temperature (30$^{\circ}C$) controlled spouting and loss of fructan, and it was effective to maintain the garlic quality.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.173-179
• /
• 2009

Fruit quality is essential for increasing marketability and consumer acceptance. To suggest an easy method for measurement of squash fruit quality, 10 varieties/cultivars and 1 populations were used as experimental materials. The fruits were harvested in marketable maturity to investigate the relation between quality factors and sensory test. The total solids content is one of the most important factors associated with sensory taste in fruits. The major squash varieties/cultivars such as 'Puthobag', 'Seoulmadi', 'Aehobag 1', 'Aehobag 2', 'Ford Zucchini', and 'Zucchini' showed total solids content of 6.4, 7.5, 7.3, 5.8, 4.7, and 4.30%, respectively. The preference values for 'Puthobag', 'Seoulmadi', 'Aehobag 1', and 'Aehobag 2', which are generally preferable varieties/cultivars, were 4.6, 4.7, 4.8, and 4.3, respectively. On the other hand, the preference values for variety 'Ford Zucchini' and cultivar 'Zucchni', which are not generally preferable, were 1.6 and 1.4, respectively. There was no significant correlation between plant length and total solids content or starch content in the fruits thereby suggesting the possibility of breeding bush type squash cultivars with good taste. This easy method of weighing dry matters of squash fruits might be useful for marketable quality index.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.183-187
• /
• 2008

Elevated concentrations of suspended solids in the marine enrironment caused by coastal developments have threatened to the marine ecosystem. Effects of suspended solids on the mortality and the modifications of glycogen levels of abalone, Haliotis discus hannai were studied. Abalone were exposed to suspended solids with concentrations of 0 (control), 1,000, 1,500 and 2,000 mg/ L for 96h. These suspended solids had no effect on the mortality of abalone. Significant decreases in the glycogen content of soft tissues were observed over 1,500 mg/ L concentration of suspended solids. These results suggested that abalone could tolerate a high level of suspended solids. However, it is necessary to observe further the long term effects of suspended solids on the physiological responses of abalone.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.105-111
• /
• 2012

This study was conducted to evaluate the influence of fruit setting order by flower cluster on the fruit weight and the soluble solids content for the strawberry of 'Seolhyang' cultivar. The first flower cluster had higher fruit number, fruit weight, soluble solids content and ratio of large fruit compared to the second and third flower cluster. The fruit set on the upper position fruit in the same flower cluster had higher fruit weight and the soluble solids compared to the fruit set on the lower position fruit in the flower cluster. The fruit weight was highly positive correlated with the soluble solids content. The result indicated that the number of fruit set for marketable yield seemed to be 9-10 per the first flower cluster, 6 per the second flower cluster, 4 per the third flower cluster and 3 per the fourth flower cluster in 'Seolhyang' cultivar.