Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Strong earthquakes and measurement performance of masonry and adobe structures

  • Received : 2012.11.25
  • Accepted : 2013.07.03
  • Published : 2013.07.10
⟨ Previous Next ⟩

Abstract

Earthquakes, which are unavoidable natural phenomena in Turkey, have often produced economic and social disaster. The latest destructive earthquakes happened in Van city. Van, Turkey, earthquakes with M = 7.2 occurred on 23 October 2011 at 13:41 (local time), whose epicenter was about 16 km north of Van (Tabanlivillage) and M = 5.6 on 9 November 2011 epicentered near the town of Edremit south of Van in eastern Turkey and caused the loss of life and heavy damages. Both earthquakes killed 644 people and 2608 people were injured. Approximately 4000 buildings collapsed or were seriously damaged. The majority of the damaged structures were seismically insufficient, unreinforced masonry and adobe buildings in rural areas. In this paper, site surveys of the damaged masonry and adobe buildings are presented and the reasons for the caused damages are discussed in detail.

Keywords

References

  1. Ajzen, I. (1991), "The theory of planned behavior", Organizational Behavior and Human Decision Processes, 50,179-211. https://doi.org/10.1016/0749-5978(91)90020-T
  2. Abbas, I.A. and Othman, M.I.A. (2012), "Generalized thennoelastic interaction in a fiber-reinforced anisotropic half-space under hydrostatic initial stress", Journal of Vibration and Control, 18(2), 175-182. https://doi.org/10.1177/1077546311402529
  3. Abdelaziz, T.H.S. (2012), "Parametric eigenstructure assigmnent using state-derivative feedback for linear systems", Journal of Vibration and Control, 18(12), 1809-1827. https://doi.org/10.1177/1077546311423549
  4. Abdel-Rohman, M. (2012), "The influence of the higher order modes on the dynamic response of suspension bridges", Journal of Vibration and Control, 18(9), 1380-1405. https://doi.org/10.1177/1077546311418867
  5. Ahmed, M.K. (2012), "A new vibration approach of an elastic oval cylindrical shell with varying circumferential thickness", Journal of Vibration and Control, 18(1), 117-131. https://doi.org/10.1177/1077546311407234
  6. Aldair, A.A. and Wang, W.J. (2012), "A neurofuzzy controller for full vehicle active suspension systems", Journal of Vibration and Control, 18(12), 1837-1854. https://doi.org/10.1177/1077546311428631
  7. Alhazza, K.A. and Majeed, M.A. (2012), "Free vibrations control of a cantilever beam using combined time delay feedback", Journal of Vibration and Control, 18(5), 609-621. https://doi.org/10.1177/1077546311405700
  8. Alphin, M.S., Sankaranarayanasamy, K. and Sivapirakasam, S.P. (2012), "Segmental vibration transmissibility of seated occupant from lumped parameter models", Journal of Vibration and Control, 18(11), 1683-1689. https://doi.org/10.1177/1077546311423065
  9. AlSaleh, R., Casciati, F., El-Attar, A. and El-Habbal, I. (2012), "Experimental validation of a shape memory alloy retrofitting application", Journal of Vibration and Control, 18(1), 17-27. https://doi.org/10.1177/1077546311405701
  10. Altug Bicak, M.M. and Rao, M.D. (2012), "Coupled squeeze film analysis by Reissner-Mindlin plate elements", Journal of Vibration and Control, 18(5), 632-640. https://doi.org/10.1177/1077546311405368
  11. Amarnath, M., Chandramohan, S. and Seetharaman, S. (2012), "Experimental investigations of surface wear assessment of spur gear teeth", Journal of Vibration and Control, 18(7), 1009-1024. https://doi.org/10.1177/1077546311399947
  12. An, X., Jiang, D., Chen, J. and Liu, C. (2012), "Application of the intrinsic time-scale decomposition method to fault diagnosis of wind turbine bearing", Journal of Vibration and Control, 18(2), 240-245. https://doi.org/10.1177/1077546311403185
  13. Babu, S. and Sambhaji, S.K. (2012), "Effects of heat and mass transfer on nonlinear magneto-hydrodynamic boundary layer flow of rheological damper fluid through annular duct", Journal of Vibration and Control,18 (13), 2085-2092. https://doi.org/10.1177/1077546310365640
  14. Bacon, M. and Olgac, N. (2012), "Swarm herding using a region holding sliding mode controller", Journal of Vibration and Control, 18(7), 1056-1066. https://doi.org/10.1177/1077546311411346
  15. Baferani, A.H., Saidi, A.R. and Jomehzadeh, E. (2012), "Exact analytical solution for free vibration of functionally graded thin annular sector plates resting on elastic foundation", Journal of Vibration and Control, 18(2), 246-267. https://doi.org/10.1177/1077546311402530
  16. Barton, D.A.W., Mann, B.P. and Burrow, S.G. (2012), "Control-based continuation for investigating nonlinear experiments", Journal of Vibration and Control, 18(4), 509-520. https://doi.org/10.1177/1077546310384004
  17. Bazaei, A. and Moallem, M. (2012), "A fundamental limitation on the control of end-point force in a very flexible single-link arm", Journal of Vibration and Control, 18 (8), 1207-1220. https://doi.org/10.1177/1077546311421513
  18. Bernardini, G., Testa, C. and Gennaretti, M. (2012), "Optimal design of tonal noise control inside smart-stiffened cylindrical shells", Journal of Vibrationnd Control, 18 (8), 1233-1246 . https://doi.org/10.1177/1077546311421516
  19. Bhatti, A.Q., Khatoon, S., Mehmood, A., Dastagir, A. and Kishi, N. (2012), "Numerical study for impact resistant design of full scale arch type reinforced concrete structures under falling weight impact test", Journal of Vibration and Control, 18 (9), 1275-1283. https://doi.org/10.1177/1077546311419176
  20. Borre, M. and Flashner, H. (2012), "Computation of periodic solutions and their regions of attraction for flexible structures under nonlinear feedback control", Journal of Vibration and Control, 18(6), 745-756. https://doi.org/10.1177/1077546311411754
  21. Boubakir, A., Labiod, S. and Boudjema, S. (2012), "A stable self-tuning proportional-integral-derivative controller for a class of multi-input multi-output nonlinear systems", Journal of Vibration and Control, 18(2), 246-267. https://doi.org/10.1177/1077546311402530
  22. Boulkroune, A. and M'saad, M. (2012), "Fuzzy adaptive observer-based projective synchronization for nonlinear systems with input nonlinearity", Journal of Vibration and Control, 18(3), 437-450. https://doi.org/10.1177/1077546311411228
  23. Bui, H.L., Tran, D.T. and Vu, N.L. (2012), "Optimal fuzzy control of an inverted pendulum", Journal of Vibration and Control, 18(14), 2097-2110. https://doi.org/10.1177/1077546311429053
  24. Castri, de A. and Messina, A. (2012), "Exact modeling for control of flexible manipulators", Journal of Vibration and Control, 18 (10), 1526-1551 . https://doi.org/10.1177/1077546311421796
  25. Chalak, H.D., Chakrabarti, A., Iqbal, M.A. and Sheikh, A.H. (2012), "Vibration of laminated sandwich beams having soft core", Journal of Vibration and Control, 18 (10),1422-1435. https://doi.org/10.1177/1077546311421947
  26. Chaouch, D.E., Ahmed-Foitih, Z. and Khelfi, M.F. (2012), "A self-tuning fuzzy inference sliding mode control scheme for a class of nonlinear systems", Journal of Vibration and Control, 18 (10), 1494-1505. https://doi.org/10.1177/1077546311419177
  27. Chen, C.W. (2012), "Applications of the Fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system", Journal of Vibration and Control, 18 (13), 1925 -1938 . https://doi.org/10.1177/1077546311428346
  28. Chen, C.W., Yeh, K., Liu, K.F.R. and Lin, M.L. (2012), "Applications of fuzzy control to nonlinear time-delay systems using the linear fuzzy Lyapunov method", Journal of Vibration and Control, 18(10), 1561-1574. https://doi.org/10.1177/1077546311410765
  29. Chen, C.W. (2012), "Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review", Journal of Vibration and Control, 18 (12),1886-1899 . https://doi.org/10.1177/1077546311428345
  30. Chen, C.Y. (2012), "A critical review of internal wave dynamics. Part 1 -Remote sensing and in-situ observations", Journal of Vibration and Control, 18(3), 417-436. https://doi.org/10.1177/1077546310395971
  31. Chen, C.Y., Shih, B.Y., Shih, C.H. and Chou, W.C. (2012), "The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks", Journal of Vibration and Control, 18(5), 577-586. https://doi.org/10.1177/1077546310371349
  32. Chen, C.Y. and Huang, P.H. (2012), "Review of an autonomous humanoid robot and its mechanical control", Journal of Vibration and Control, 18(7), 973-982. https://doi.org/10.1177/1077546310395974
  33. Chen, C.Y. (2012), "A critical review of internal wave dynamics. Part 2 -Laboratory experiments and theoretical physics", Journal of Vibration and Control, 18(7), 983-1008. https://doi.org/10.1177/1077546310397561
  34. Cheng, M., Meng, G. and Wu, B. (2012), "Nonlinear dynamics of a rotor-ball bearing system with Alford force", Journal of Vibration and Control, 18(1), 17-27. https://doi.org/10.1177/1077546311405701
  35. Cheng, M., Meng, G.G. and Wu, B. (2012) "Nonlinear dynamics of a rotor-ball bearing system with Alford force", Journal of Vibration and Control, 18(1), 17 -27 . https://doi.org/10.1177/1077546311405701
  36. Chen, S.H., Ho, W.H., Chou, J.H. and Lu, F. (2012) "Design of robust-stable and quadratic finite-horizon optimal active vibration controllers with low trajectory sensitivity for the uncertain flexible rotor systems via the orthogonal-functions approach and the hybrid Taguchi-genetic algorithm", Journal of Vibration and Control, 18(7), 924-940. https://doi.org/10.1177/1077546310395968
  37. Chiementin, X., Kilundu, B., Rasolofondraibe, L., Crequy, S. and Pottier, B. (2012), "Performance of wavelet denoising in vibration analysis: highlighting", Journal of Vibration and Control, 18(6), 850-858. https://doi.org/10.1177/1077546311412992
  38. Cigada, A., Manzoni, S., Redaelli, M. and Vanali, M. (2012), "Optimization of the current flowing technique aimed at semi-passive multi-modal vibration reduction", Journal of Vibration and Control, 18(2), 298-312. https://doi.org/10.1177/1077546311407537
  39. Cornejo, C. and Alvarez-Icaza, L. (2012), "Passivity based control of under-actuated mechanical systems with nonlinear dynamic friction", Journal of Vibration and Control, 18(7), 1025-1042. https://doi.org/10.1177/1077546311408469
  40. Chomette, B. and Sinou, J.J. (2012), "Crack detection based on optimal control", Journal of Vibration and Control, 18(11), 1737-1749. https://doi.org/10.1177/1077546311429839
  41. Chung, C. and Kao, I. (2012), "Green's function and forced vibration response of damped axially moving wire", Journal of Vibration and Control, 18(12), 1798-1808. https://doi.org/10.1177/1077546311428632
  42. Cong, F., Chen, J. and Dong, G. (2012), "An energy analyzing method for the assessment and diagnosis of rub-impact fault in a rotor system", Journal of Vibration and Control, 18 (12), 1865-1875 . https://doi.org/10.1177/1077546311428636
  43. Cui, Z. and Wu, B. (2012), "A new self-adaptive trust region method for unconstrained optimization", Journal of Vibration and Control, 18 (9), 1303-1309. https://doi.org/10.1177/1077546311408473
  44. Cura, F., Mura, A. and Scarpa, F. (2012), "Modal strain energy based methods for the analysis of complex patterned free layer damped plates", Journal of Vibration and Control, 18(9), 1291-1302. https://doi.org/10.1177/1077546311417277
  45. Czop, P. (2012), "Application of inverse data-driven parametric models in the reconstruction of passenger vehicle wheel vertical movement under ride conditions", Journal of Vibration and Control, 18(8),133-1140.
  46. Corrigendum (2012), Journal of Vibration and Control, 18(13).
  47. Das, D., Sahoo, P. and Saha, K. (2012), "A numerical analysis of large amplitude beam vibration under different boundary conditions and excitation patterns", Journal of Vibration and Control, 18(12), 1900-1915. https://doi.org/10.1177/1077546311429147
  48. Dehghan, H. and Hajarian, M. (2012), "Convergence of the descent Dai-Yuan conjugate gradient method for unconstrained optimization", Journal of Vibration and Control, 18 (9), 1249-1253. https://doi.org/10.1177/1077546311405750
  49. Didier, J., Faverjon, B. and Sinou, J.J. (2012), "Analysing the dynamic response of a rotor system under uncertain parameters by polynomial chaos expansion", Journal of Vibration and Control, 18(5), 712-732. https://doi.org/10.1177/1077546311404269
  50. Dogan, M. and Morgul, O. (2012), "Boundary control of a rotating shear beam with observer feedback", Journal of Vibration and Control, 18(14), 2257-2265. https://doi.org/10.1177/1077546311429145
  51. Duan, S., Ni, J. and Ulsoy, A.G. (2012), "Decay function estimation for linear time delay systems via the Lambert W function", Journal of Vibration and Control, 18(10), 1462-1473. https://doi.org/10.1177/1077546311408168
  52. Duc, N.D., Vu, N.L., Tran, D.T. and Bui, H.L. (2012), "A study on the application of hedge algebras to active fuzzy control of a seism-excited structure", Journal of Vibration and Control, 18, 2186-2200. https://doi.org/10.1177/1077546311429057
  53. Estupinan, E.A. and Santos, I.F. (2012), "Radial oil injection applied to main engine bearings: evaluation of injection control rules", Journal of Vibration and Control, 18(5), 587-595. https://doi.org/10.1177/1077546311408470
  54. Erkaya, S. (2012), "Analysis of the vibration characteristics of an experimental mechanical system using neural networks", Journal of Vibration and Control, 18(13), 2059-2072. https://doi.org/10.1177/1077546311429059
  55. Faieghi, M.R., Delavari, H. and Baleanu, D. (2012), "Control of an uncertain fractional-order Liu system via fuzzy fractional-order sliding mode control", Journal of Vibration and Control, 18 (9), 1366-1374. https://doi.org/10.1177/1077546311422243
  56. Feng, J., Wang, Y. and Zhu, W.Q. (2012), "Robustness of feedback stabilization of quasi non-integrable Hamiltonian systems with parametric uncertainty", Journal of Vibration and Control, 18(5), 622-631. https://doi.org/10.1177/1077546311411059
  57. Feng, J., Ying, Z.G., Zhu, W.Q. and Wang, Y. (2012), "A minimax stochastic optimal semi-active control strategy for uncertain quasi-integrable Hamiltonian systems using magneto-rheological dampers", Journal of Vibration and Control, 18(13), 1986-1995 https://doi.org/10.1177/1077546311429058
  58. Foda, M.A. (2012), "Vibration control and suppression of an axially moving string", Journal of Vibration and Control, 18(1), 58-75. https://doi.org/10.1177/1077546311404727
  59. Galdos, G. and Karimi, A. (2012), "A solution to the flexible transmission benchmark by convex optimization", Journal of Vibration and Control, 18(7), 964-972. https://doi.org/10.1177/1077546311410340
  60. Gallo, C.A., Tofoli, F.L., Rade, D.A. and Steffen, V. Jr. (2012), "Piezoelectric actuators applied to neutralize mechanical vibrations", Journal of Vibration and Control, 18 (11), 1650-1660. https://doi.org/10.1177/1077546311422549
  61. Ganesh, G. and Patnaik, S.K. (2012), "Artificial neural network based proportional plus integral plus derivative controller for a brushless DC position control system", Journal of Vibration and Control, 18(14), 2164-2175. https://doi.org/10.1177/1077546311429840
  62. Garcia-Perez, A., Romero-Troncoso, R.J., Cabal-Yepez, E., Osornio-Rios, R.A. and Lucio-Martinez, J.A. (2012), "Application of high-resolution spectral-analysis for identifying faults in induction motors by means of sound", Journal of Vibration and Control, 18 (11), 1585 -15941. https://doi.org/10.1177/1077546311422925
  63. Catania, G. and Sorrentino, S. (2012), "Spectral modeling of vibrating plates with general shape and general boundary conditions", Journal of Vibration and Control, 18 (11), 1607-1623. https://doi.org/10.1177/1077546311426593
  64. Gottlieb, O. and Habib, G. (2012), "Non-linear model-based estimation of quadratic and cubic damping mechanisms governing the dynamics of a chaotic spherical pendulum", Journal of Vibration and Control, 18(4), 536-547. https://doi.org/10.1177/1077546310395969
  65. Goldasz, J. and Alexandridis, A.A. (2012), "Medium- and high-frequency analysis of magnetorheological fluid dampers", Journal of Vibration and Control, 18(14), 2140-2148. https://doi.org/10.1177/1077546311428637
  66. Grasso, E., Chris, M., Janocha, H. and David, N. (2012), "generating periodic forces with the pendulum actuator", Journal of Vibration and Contro, 18(1), 3-16. https://doi.org/10.1177/1077546311403183
  67. Guo, H.Y. and Li, Z.L. (2012), "A two-stage method for damage detection using frequency responses and statistical theory", Journal of Vibration and Control, 18(2), 191-200. https://doi.org/10.1177/1077546311403956
  68. Guo, S. and Yang, S. (2012), "Wave motions in non-uniform one-dimensional waveguides", Journal of Vibration and Control, 18(1), 92-100. https://doi.org/10.1177/1077546311399948
  69. Gupta, A.K. and Sharma, P. (2012), "Effect of linear thermal gradient on vibrations of trapezoidal plates whose thickness varies parabolically", Journal of Vibration and Control, 18(3), 395-403. https://doi.org/10.1177/1077546311409266
  70. Hacioglu, Y. and Yagiz, N. (2012), "Adaptive backstepping control with estimation for the vibration isolation of buildings", Journal of Vibration and Control, 18(13), 1996-2005. https://doi.org/10.1177/1077546311429052
  71. Hanieh, A.A. (2012), "Vibration isolation pad for medical purposes: modeling and simulation", Journal of Vibration and Control, 18(13), 2031-2038. https://doi.org/10.1177/1077546311429340
  72. He, J.F., Jiang, H.Z., Tong, Z.Z., Li, B.P. and Han, J.W. (2012), "Study on dynamic isotropy of a class of symmetric spatial parallel mechanisms with actuation redundancy", Journal of Vibration and Control, 18 (8), 1156-1164. https://doi.org/10.1177/1077546311409608
  73. Hoque, M.E., Mizuno, T., Ishino, Y. and Takasaki, M. (2012), "A modified zero-power control and its application to vibration isolation system", Journal of Vibration and Control, 18 (12), 1788-1797 . https://doi.org/10.1177/1077546311419985
  74. Huang, C.F., Lin, J.S., Liao, T.L. and Yan, J.J. (2012), "Quasi sliding mode control for chaotic symmetric gyros with linear-plus-cubic damping and input nonlinearity", Journal of Vibration and Control, 18 (9), 1330 -1335. https://doi.org/10.1177/1077546311421797
  75. Huang, K., Zhang, Y. and Yu, F. (2012). "Predictive controller design for electromagnetic suspension based on mixed logical dynamical model", Journal of Vibration and Control, 18 (8), 1165-1176. https://doi.org/10.1177/1077546311409609
  76. Huo, L., Song, G., Nagarajaiah, S. and Li, H. (2012), "Semi-active vibration suppression of a space truss structure using a fault tolerant controller", Journal of Vibration and Control, 18 (10), 1436-1453. https://doi.org/10.1177/1077546311421514
  77. Inoue, T., Niimi, H. and Ishida, Y. (2012), "Vibration suppression of the rotor system using both a ball balancer and axial control of the repulsive magnetic bearing", Journal of Vibration and Control, 18(4), 484-498. https://doi.org/10.1177/1077546310379626
  78. Jian, J. and Zhang, B. (2012), "Rolling element bearing vibration modeling with applications to health monitoring", Journal of Vibration and Control,18(12), 1768-1776. https://doi.org/10.1177/1077546311422241
  79. Jiang, Y. (2012), "Rejection of nonharmonic disturbances in nonlinear systems via the internal model approach", Journal of Vibration and Control,18(12), 1916-1921. https://doi.org/10.1177/1077546311429051
  80. Jiang, J.Q., Chen, W.Q. and Pao, Y.H. (2012), "Reverberation-ray analysis of continuous Timoshenko beams subject to moving loads", Journal of Vibration and Control, 18(6), 774-784. https://doi.org/10.1177/1077546310397562
  81. Jovanovic, V. (2012), "A fourier series solution for the transverse vibration of a clamped beam with a torsional damper at the boundary", Journal of Vibration and Control, 18(3), 344-356. https://doi.org/10.1177/1077546311403790
  82. Kahrobaiyan, M., Asghari, M., Hoore, M. and Ahmadian, M.T. (2012), "Nonlinear size-dependent forced vibrational behavior of microbeams based on a non-classical continuum theory", Journal of Vibration and Control, 18(5), 696-711. https://doi.org/10.1177/1077546311414600
  83. Kang, Z., Xu, K. and Luo, Z. (2012), "A numerical study on nonlinear vibration of an inclined cable coupled with the deck in cable-stayed bridges", Journal of Vibration and Control, 18(3), 404-416. https://doi.org/10.1177/1077546311407648
  84. Kang, J.H. (2012), "Vibrations of hemi-spherical shells of revolution with eccentricity from a three -dimensional theory", Journal of Vibration and Control, 18(13), 2017-2030. https://doi.org/10.1177/1077546311429061
  85. Karri, S.K.V. and Rao, S.K.S.S. (2012), "Influence of lateral vibrations on the whirling characteristics of fear-pinion rotor system", Journal of Vibration and Control, 18(11), 1624-163. https://doi.org/10.1177/1077546311423064
  86. Khot, S.M. and Yelve, N.P. (2012), "Estimation of geometrical parameters of machine elements based on statistical methods to avoid resonance", Journal of Vibration and Control, 18(2), 209-213. https://doi.org/10.1177/1077546311403793
  87. Khot, S.M., Yelve, N.P., Tomar, R., Desai, S. and Vittal, S. (2012), "Active vibration control of cantilever beam by using PID based output feedback controller", Journal of Vibration and Control, 18(3), 366-372. https://doi.org/10.1177/1077546311406307
  88. Kirk, R.G., Alsaeed, A. and Mondschein, B. (2012), "Turbocharger vibration shows nonlinear jump", Journal of Vibration and Control,18(10), 1454-1461. https://doi.org/10.1177/1077546311420460
  89. Komarasamy, R., Albhonso, N. and Gurusamy, G. (2012), "Order reduction of linear systems with an improved pole clustering", Journal of Vibration and Control,18(12), 1876-1885. https://doi.org/10.1177/1077546311426592
  90. Korkmaz, K.A., Nuhoglu, A., Arisoy, B. and Carhoglu, A.I. (2012), "Investigation of structural safety of existing masonry healthcare facilities in Turkey", Journal of Vibration and Control, 18(6), 867-877. https://doi.org/10.1177/1077546311404732
  91. Krauss, R.W. (2012), "Computationally efficient modeling of flexible robots using the transfer matrix method", Journal of Vibration and Control, 18(5), 596-608. https://doi.org/10.1177/1077546311408466
  92. Kuo, C.F.J., Huy, V.Q., Chiu, C.H. and Chiu, S.F. (2012), "Dynamic modeling and control of an atomic force microscope probe measurement system", Journal of Vibration and Control, 18(1), 101-116. https://doi.org/10.1177/1077546310397794
  93. Lacarbonara, W., Yabuno, H. and Yoshizawa, M. (2012), "Experiments in dynamics and control", Journal of Vibration and Control, 18(4), 483. https://doi.org/10.1177/1077546311403560
  94. Li, C., Liang, M., Wang, Y. and Dong, Y. (2012), "Vibration suppression using two-terminal flywheel. Part I: modeling and characterization", Journal of Vibration and Control, 18(8), 1096-1105. https://doi.org/10.1177/1077546311419546
  95. Li, C., Liang, M., Wang, Y. and Dong, Y. (2012), "Vibration suppression using two-terminal flywheel. Part II: application to vehicle passive suspension", Journal of Vibration and Control, 18(9), 1353-1365. https://doi.org/10.1177/1077546311419547
  96. Li, H., Liao, X. and Lei, X. (2012), "Two fuzzy control schemes for Lorenz-Stenflo chaotic system", Journal of Vibration and Control, 18(11), 1675-1682. https://doi.org/10.1177/1077546311423550
  97. Liu, J., Wang, W. and Ma, F. (2012), "Bearing system health condition monitoring using a wavelet cross-spectrum analysis technique", Journal of Vibration and Control, 18(7), 953-963. https://doi.org/10.1177/1077546311417276
  98. Li, F.M., Song, Z.G. and Chen, Z.B. (2012), "Active vibration control of conical shells using piezoelectric materials", Journal of Vibration and Control, 18(14), 2234-2256. https://doi.org/10.1177/1077546311429055
  99. Liu, Z.S. and Wu, Z.G. (2012), "Iterated schemes for dynamic condensation of structures with general viscous damping distributions", Journal of Vibration and Control, 18(7), 1067-1078. https://doi.org/10.1177/1077546311403955
  100. Liu, Y.T., Chiang, W.L., Chen, C.W., Hsu, W.K., Lin, C.W., Chiou, D.J. and Huang, P.C. (2012), "Structural system identification for vibration bridges using the Hilbert-Huang transform", Journal of Vibration and Control, 18(13), 1939-1956. https://doi.org/10.1177/1077546311428347
  101. Li, Y., Zuo, S., Lei, L., Yang, X. and Wu, X. (2012), "Analysis of impact factors of tire wear", Journal ofVibration and Control, 18(6) 833-840.
  102. Li, Y., Xu, D., Fu, Y. and Zhou, J. (2012), "Chaotification and optimization design of a nonlinear vibration isolation system", Journal of Vibration and Control, 18(14), 2129-2139. https://doi.org/10.1177/1077546311429054
  103. Liu, Y.M., Zogg, M. and Ermanni, P. (2012), "An experimental comparative study on non-conventional surface and interface damping techniques for automotive panel structures", Journal of Vibration and Control, 18(14), 2210-2233. https://doi.org/10.1177/1077546311429339
  104. Luo, A.C.J. and Huang, J. (2012), "Approximate solutions of periodic motions in nonlinear systems via a generalized harmonic balance", Journal of Vibration and Control, 18(11), 1661-1674. https://doi.org/10.1177/1077546311421053
  105. Ma, C.Y., Liu, J.H. and Wang, C.L. (2012), "Chaos of a power system model and its control", Journal of Vibration and Control, 18(14), 2176-2185. https://doi.org/10.1177/1077546311429587
  106. Macha, E., Kasprzyczak, L. and Mirek, G (2012) "Digital control systems based on Matlab/Simulink software for strength machines", Journal of Vibration and Control, 18(2), 201-208. https://doi.org/10.1177/1077546311403865
  107. Mahmoud, G.M. and Ahmed, M.E. (2012), "A hyperchaotic complex system generating two-, three-, and four-scroll attractors", Journal of Vibration and Control, 18(6), 841-849. https://doi.org/10.1177/1077546311405370
  108. Mamani, G., Becedas, J. and Feliu, V. (2012), "Sliding mode tracking control of a very lightweight single-link flexible robot robust to payload changes and motor friction", Journal of Vibration and Control, 18(8), 1141-1155. https://doi.org/10.1177/1077546311416269
  109. Manna, M.C. (2012), "Free vibration of tapered isotropic rectangular plates", Journal of Vibration and Control, 18(1), 76-91. https://doi.org/10.1177/1077546310396800
  110. Mansour, S., Arzanpour, S. and Golnaraghi, F. (2012), "Design of a solenoid valve based active engine mount", Journal of Vibration and Control, 18(8), 1221-1232. https://doi.org/10.1177/1077546311417275
  111. Maruyama, S., Nagai, K.I., Sogamoto, D. and Yamaguchi, T. (2012), "Experiments on chaotic vibrations of a post-buckled cantilevered beam connected by a string to an axial spring", Journal of Vibration and Control, 18(2), 163-174. https://doi.org/10.1177/1077546311408472
  112. May, J.E. and Menzemer, C.C. (2012), "Concept demonstration of modal damping, a nonlinear structural vibration control scheme applied to a small scale vibrating aluminum cantilever model", Journal of Vibration and Control, 18(3), 357-365. https://doi.org/10.1177/1077546311408167
  113. May, J.E. and Menzemer, C. (2012), "Modal damping effects on the spatial distribution of anelastic damped vibration energy for a baseline cantilever structure", Journal of Vibration and Control,18(10), 1575-1582. https://doi.org/10.1177/1077546311408990
  114. McNeill, S.I. (2012), "An analytic formulation for blind modal identification", Journal of Vibration and Control, 18(13), 2111-2121. https://doi.org/10.1177/1077546311429146
  115. Mei, C. (2012), "Studying the effects of lumped end mass on vibrations of a Timoshenko beam using a wave-based approach", Journal of Vibration and Control, 18(5), 733-742. https://doi.org/10.1177/1077546311406162
  116. Meissner, M. (2012), "The discrete Hilbert transform and its application to analysis of reverberant decay of modal vibrations in enclosures", Journal of Vibration and Control,18(11), 1595-1606. https://doi.org/10.1177/1077546311420896
  117. Meng, T. and Hong-Xing, H. (2012), "Improved low-frequency performance of a composite sound absorption coating", Journal of Vibration and Control, 18(1), 48-57. https://doi.org/10.1177/1077546311400930
  118. Moghaddas, M., Esmailzadeh, E., Sedaghati, R. and Khosravi, P. (2012), "Vibration control of Timoshenko beam traversed by moving vehicle using optimized tuned mass damper", Journal of Vibration and Control, 18(6), 757-773. https://doi.org/10.1177/1077546311404267
  119. Mohamadnejad, M., Gholami, R., Ramezanzadeh, A. and Jalali, M.E. (2012), "Prediction of blast-induced vibrations in limestone quarries using Support Vector Machine", Journal of Vibration and Control, 18(9), 1322-1329. https://doi.org/10.1177/1077546311421052
  120. Montseny, G. (2012), "Diffusive wave-absorbing control: example of the boundary stabilization of a thin flexible beam", Journal of Vibration and Control,18(11),1708-1721. https://doi.org/10.1177/1077546311419933
  121. Nakata, N. (2012), "A multi-purpose earthquake simulator and a flexible development platform for actuator controller design", Journal of Vibration and Control,18(10)1552-1560. https://doi.org/10.1177/1077546311421946
  122. Nanda, R.P., Agarwal, P. and Shrikhande, M. (2012), "Base isolation by geosynthetic for brick masonry buildings", Journal of Vibration and Control, 18(6), 903-910. https://doi.org/10.1177/1077546311412411
  123. Nath, C.N., Tajuddin, M. and Kumar, J.M. (2012), "On the parametric model of loose bonding between poroelastic half-spaces", Journal of Vibration and Control,18(9), 1261-1274. https://doi.org/10.1177/1077546311417834
  124. Nayfeh, A.H., Hammad, B.K. and Hajj, M.R. (2012), "Discretization effects on flutter aspects and control of wing/store configurations", Journal of Vibration and Control, 18(7), 1043-1055. https://doi.org/10.1177/1077546311408468
  125. Nayfeh, A.H. and Nayfeh, N.A. (2012), "Time-delay feedback control of lathe cutting tools", Journal of Vibration and Control, 18(8), 1106-1115. https://doi.org/10.1177/1077546311410763
  126. Ni, B. and Hu, C. (2012), "Dynamics of the mindlin plate and its modal vibration control", Journal of Vibration and Control, 18(13), 2039-2049. https://doi.org/10.1177/1077546311429149
  127. Omar, F.K., Moustafa, K.A.F. and Emam, S. (2012), "Mathematical modeling of gearbox including defects with experimental verification", Journal of Vibration and Control,18(9), 1310-1321. https://doi.org/10.1177/1077546311403791
  128. Panchal, V.R. and Jangid, R.S. (2012), "Performance of variable friction pendulum system for torsionally coupled structures", Journal of Vibration and Control,18(3), 323-343. https://doi.org/10.1177/1077546311407536
  129. Pham, T.T., Lamarque, C.H. and Savadkoohi, A.T. (2012), "Multi-resonance capturing in a two-degree-of-freedom system under two different harmonic excitations", Journal of Vibration and Control, 18(3), 451-466. https://doi.org/10.1177/1077546311404268
  130. Pinto, C.M. and Machado, J.A.T. (2012), "Complex-order forced van der Pol oscillator", Journal of Vibration and Control, 18(14), 2201-2209. https://doi.org/10.1177/1077546311429150
  131. Pothula, A., Gupta, A. and Kathawate, G.R. (2012), "Fatigue failure in random vibration and accelerated testing", Journal of Vibration and Control,18(8), 1199-1206. https://doi.org/10.1177/1077546311419545
  132. Rath, M.K. and Sahu, S.K. (2012), "Vibration of woven fiber laminated composite plates in hygrothermal environment", Journal of Vibration and Control, 18(13), 1957-1970 https://doi.org/10.1177/1077546311428638
  133. Raftoyiannis, I.G., Avraam, T.A. and Michaltsos, G.T. (2012), "A new approach for loads moving on infinite beams resting on elastic foundation", Journal of Vibration and Control,18(2), 1828-1836. https://doi.org/10.1177/1077546311426440
  134. Ruan, M., Wang, Z.M. and Wang, Y. (2012), "Dynamic stability of functionally graded materials skew plates subjected to uniformly distributed tangential follower forces", Journal of Vibration and Control, 18(7), 913-923. https://doi.org/10.1177/1077546311403787
  135. Saadatmandi, A. and Dehghan, M. (2012), "A method based on the tau approach for identification of a time-dependent coefficient in the heat equation subject to an extra measurement", Journal of Vibration and Control, 18(8), 1125-1132 https://doi.org/10.1177/1077546311408474
  136. Saha, A., Pandey, S.S., Bhattacharya, B. and Wahi, P. (2012), "Analysis and control of friction-induced oscillations in a continuous system", Journal of Vibration and Control, 18(3), 467-480. https://doi.org/10.1177/1077546311403792
  137. Sari, M.S. and Butcher, E.A. (2012), "Free vibration analysis of rectangular and annular Mindlin plates with undamaged and damaged boundaries by the spectral collocation method", Journal of Vibration and Control,18(11), 1722-1736. https://doi.org/10.1177/1077546311422242
  138. Sayyad, F.B. and Kumar, B. (2012), "Identification of crack location and crack size in a simply supported beam by measurement of natural frequencies", Journal of Vibration and Control, 18(2), 183-190. https://doi.org/10.1177/1077546310395979
  139. Scurtu, P.R., Clark, M. and Zu, J.W. (2012), "Coupled longitudinal and transverse vibration of automotive belts under longitudinal excitations using analog equation method", Journal of Vibration and Control, 18(9), 1336-1352. https://doi.org/10.1177/1077546311418866
  140. Sezer, S. and Atalay, A.E. (2012), "Application of fuzzy logic based control algorithms on a railway vehicle considering random track irregularities", Journal of Vibration and Control,18(8), 1177-1198. https://doi.org/10.1177/1077546311416268
  141. Shen, G., Guang-ming, L.V., Zheng-mao, Y., Da-cheng, C. and Jun-wei, H. (2012), "Feed-forward inverse control for transient waveform replication on electro-hydraulic shaking table", Journal of Vibration and Control,18(10), 1474-1493. https://doi.org/10.1177/1077546311417743
  142. Shih, B.Y., Chen, C.Y., Chang, H. and Ma, J.M. (2012), "Dynamics and control for robotic manipulators using a greedy algorithm approach", Journal of Vibration and Control, 18(6), 859-866. https://doi.org/10.1177/1077546311407649
  143. Shih, B.Y., Chen, C.Y. and Chou, W. (2012), "An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors", Journal of Vibration and Control, 18(12), 1855-1864. https://doi.org/10.1177/1077546311426734
  144. Silva, M.F. and Machado, J.A.T. (2012), "A literature review on the optimization of legged robots", Journal of Vibration and Control, 18(12), 1753-1767. https://doi.org/10.1177/1077546311403180
  145. Sina, I.K. (2012), "Robust control and unbalance compensation of rotor/active magnetic bearing systems",Journal of Vibration and Control, 18(6), 817-832. https://doi.org/10.1177/1077546310397560
  146. Song, B. and Sun, J.Q. (2012), "Sliding mode control of uncertain dynamical systems with time delay using the continuous time approximation method", Journal of Vibration and Control, 18(9), 1254-1260. https://doi.org/10.1177/1077546311421795
  147. Soundarrajan, A., Sumathi, S. and Sivamurugan, G. (2012), "Voltage and frequency control in power generating system using hybrid evolutionary algorithms", Journal of Vibration and Control, 18(2), 214-227. https://doi.org/10.1177/1077546311404731
  148. Tahavori, M. and Shaker, H.R. (2012), "Relative error model reduction via time-weighted balanced stochastic singular perturbation", Journal of Vibration and Control, 18(13), 2006-2016. https://doi.org/10.1177/1077546311429008
  149. Tajeddini, V. and Ohadi, A. (2012), "Three-dimensional vibration analysis of functionally graded thick, annular plates with variable thickness via polynomial-Ritz method", Journal of Vibration and Control,18(11), 1698-1707. https://doi.org/10.1177/1077546311403789
  150. Tang, H., Chen, J. and Dong, G. (2012), "Signal complexity analysis for fault diagnosis of rolling element bearings based on matching pursuit", Journal of Vibration and Control, 18(5), 671-683. https://doi.org/10.1177/1077546311405369
  151. Tong, Z., Long-Xiang, C. and Guo-ping, C. (2012), "Experimental study of H ${\infty}$ control for a flexible plate",Journal of Vibration and Control, 18(11)1631-1649. https://doi.org/10.1177/1077546311419986
  152. Tatari, M. and Dehghan, M. (2012), "An efficient method for solving multi-point boundary value problems and applications in physics", Journal of Vibration and Control, 18(8), 1116-1124. https://doi.org/10.1177/1077546311408467
  153. Tsai, N.C., Chen, D.C., Shih, L.W. and Chiang, C.W. (2012), "Model reduction and composite control for overhead hoist transport system by singular perturbation technique", Journal of Vibration and Control, 18(8), 1081-1095. https://doi.org/10.1177/1077546311410762
  154. Tseng, C.P., Chen, C.W. and Liu, K.F.R. (2012), "Risk control allocation model for pressure vessels and piping project", Journal of Vibration and Control, 18(3), 385-394. https://doi.org/10.1177/1077546311403182
  155. Tseng, W.K., Rafaely, B. and Elliott, S. (2012), "A novel method of designing stable feedback controllers for local control of sound", Journal of Vibration and Control, 18(5), 651-658. https://doi.org/10.1177/1077546311405367
  156. Venkatachalam, R., Prabu, S.B. and Raja, K.V. (2012), "Finite element based investigation on vibrational performance of a sandwich system", Journal of Vibration and Control,18(9) 1284-1290.
  157. Vidrih, Z., Fischinger, M. and Isakovi, T. (2012), "Numerical investigation on smart magnetically controlled elastomeric bearings", Journal of Vibration and Control, 18(13), 2073-2084. https://doi.org/10.1177/1077546311429060
  158. Wang, F., Huo, S., Yue, Z. and Qian, W. (2012), "Further study on aeroelastic response of aircraft wing with freeplay", Journal of Vibration and Control, 18(10), 1690-1697. https://doi.org/10.1177/1077546311424306
  159. Wang, G., Zhao, K., Li, X., Li, L. and Wang, J. (2012), "Arrangement optimization of hammers and fenders on Scrap Metal Shredder using ant colony algorithms", Journal of Vibration and Control, 18(5), 659-670. https://doi.org/10.1177/1077546311405560
  160. Wang, H., Shen, X.H., Zhang, L.X. and Zhu, X.J. (2012), "Active vibration suppression of flexible structure using a LMI-based control patch", Journal of Vibration and Control, 18(9) 1375-1379.
  161. Wang, J., Duan, F., Jiang, J.H., Lu, L.X. and Wang, Z.W. (2012), "Dropping damage evaluation for a hyperbolic tangent cushioning system with a critical component", Journal of Vibration and Control,18(10), 1417-1421. https://doi.org/10.1177/1077546311421515
  162. Wang, J. and Li, Q. (2012), "Finite element analysis of stiffness characteristics of an electromagnetic device", Journal of Vibration and Control, 18(1), 141-160. https://doi.org/10.1177/1077546311404728
  163. Wang, J., Mak, C.M. and Yun, Y. (2012), "A methodology for direct identification of characteristic wave-types in a finite periodic dual-layer structure with transverse connection", Journal of Vibration and Control, 18(9), 1406-1414. https://doi.org/10.1177/1077546311419699
  164. Wang, L. (2012), "Vibration analysis of nanotubes conveying fluid based on gradient elasticity theory", Journal of Vibration and Control, 18(2), 313-320. https://doi.org/10.1177/1077546311403957
  165. Wang, Z., Chen, J., Zhou, Y. and Xiao, W. (2012), "A new method for blind extraction of cyclostationary signals", Journal of Vibration and Control, 18(6), 878-892. https://doi.org/10.1177/1077546311404730
  166. Wilcox, B. and Dankowicz, H. (2012), "An experimental testbed for investigating nonsmooth bifurcations in an electromechanical system", Journal of Vibration and Control, 18(4), 521-535. https://doi.org/10.1177/1077546311425182
  167. Wu, T.Y., Hong, H.C. and Chung, Y.L. (2012), "A looseness identification approach for rotating machinery based on post-processing of ensemble empirical mode decomposition and autoregressive modeling", Journal of Vibration and Control, 18(6), 796-807. https://doi.org/10.1177/1077546311411755
  168. Xie, X., Zhang, D.W.H., Shen, Y. and Mikio, Y. (2012), "Low-frequency noise radiation from traffic-induced vibration of steel double-box girder bridge", Journal of Vibration and Control, 18(3), 373-384. https://doi.org/10.1177/1077546311411060
  169. Xiuchang, H., Shiyin, X., Aihua, J. and Hongxing, H. (2012), "Modeling and optimization of floating raft systems in submarines under different objectives by using hybrid genetic algorithm", Journal of Vibration and Control, 18(2), 268-297. https://doi.org/10.1177/1077546311403184
  170. Xu, Z.D., Huang, X.H. and Lu, L.H. (2012), "Experimental study on horizontal performance of multi-dimensional earthquake isolation and mitigation devices for long-span reticulated structures", Journal of Vibration and Control, 18(7), 941-952. https://doi.org/10.1177/1077546311418868
  171. Xu, Z.D., Tu, Q. and Guo, Y.F. (2012), "Experimental study on vertical performance of multidimensional earthquake isolation and mitigation devices for long-span reticulated structures", Journal of Vibration and Control, 18(13), 1971-1985. https://doi.org/10.1177/1077546311429338
  172. Yamashita, K., Kitajo, K., Wada, S., Sugiura, T. and Yabuno, H. (2012), "Impact oscillations with multiple modes between a pantograph and an overhead rigid conductor line in a railway current collection system", Journal of Vibration and Control, 18(4), 499-508. https://doi.org/10.1177/1077546310380430
  173. Yang, Y.S., Liao, T.L. and Yan, J.J. (2012), "Sliding mode control design for generalized projective synchronization of unified chaotic systems containing nonlinear inputs", Journal of Vibration and Control, 18(6), 808-816. https://doi.org/10.1177/1077546309355296
  174. Yang, C.Y., Hsieh, C.H., Chung, L.L., Chen, H.M. and Wu, L.Y. (2012), "Effectiveness of an eccentric rolling isolation system with friction damping", Journal of Vibration and Control, 18(14), 2149-2163. https://doi.org/10.1177/1077546311428633
  175. Yao, J. and Wang, C. (2012), "Model reference adaptive control for a hydraulic underwater manipulator", Journal of Vibration and Control, 18(6), 893-902. https://doi.org/10.1177/1077546311412993
  176. Yao, J., Di, D. and Han, J. (2012), "Adaptive notch filter applied to acceleration harmonic cancellation of electro-hydraulic servo system", Journal of Vibration and Control, 18(5), 641-650. https://doi.org/10.1177/1077546311405371
  177. Yavuz, H., Mistikoglu, S. and Kapucu, S. (2012), "Hybrid input shaping to suppress residual vibration of flexible systems", Journal of Vibration and Control, 18(1), 132-140. https://doi.org/10.1177/1077546311403179
  178. Yeh, K., Chen, C.W., Lo, D.C. and Liu, K.F.R. (2012), "Neural-network fuzzy control for chaotic tuned mass damper systems with time delays", Journal of Vibration and Control, 18(6), 785-795. https://doi.org/10.1177/1077546311407538
  179. Yina, G. and Dawei, Z. (2012), "Single channel surface electromyography blind recognition model based on watermarking", Journal of Vibration and Control, 18(1), 42-47. https://doi.org/10.1177/1077546310395966
  180. Yina, G., Qinghua, W., Shuhua, H. and Naik, G.R. (2012), "Remote rapid prototyping manufacturing network using optimization recurrent hidden Markov models", Journal of Vibration and Control, 18(14), 2122-2128 https://doi.org/10.1177/1077546311428635
  181. Yu, P.P. and Huang, B.W. (2012), "Time dependent buckling and critical speed in a twisted micro drilling process", Journal of Vibration and Control, 18(13), 2050-2058. https://doi.org/10.1177/1077546311427757
  182. Zargar, B., Fahim, A. and Jnifene, A. (2012), "Development, validation and parameter sensitivity analyses of a nonlinear mathematical model of air springs", Journal of Vibration and Control,18(12), 1777-1787. https://doi.org/10.1177/1077546311426250
  183. Zou, L., Huang, K., Wang, L., Butterworth, J. and Ma, X. (2012), "Vibration control of adjacent buildings considering pile-soil-structure interaction", Journal of Vibration and Control, 18(12), 684-695. https://doi.org/10.1177/1077546311408989