[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.12989/sem.2013.47.1.099

Strong earthquakes and measurement performance of masonry and adobe structures

Liu, Yanling (Hainan Normal Univ)
Han, Qinkia (Department of Civil Engineering, Atilim University)

Publication Information

Structural Engineering and Mechanics / v.47, no.1, 2013 , pp. 99-118 More about this Journal

Abstract

Earthquakes, which are unavoidable natural phenomena in Turkey, have often produced economic and social disaster. The latest destructive earthquakes happened in Van city. Van, Turkey, earthquakes with M = 7.2 occurred on 23 October 2011 at 13:41 (local time), whose epicenter was about 16 km north of Van (Tabanlivillage) and M = 5.6 on 9 November 2011 epicentered near the town of Edremit south of Van in eastern Turkey and caused the loss of life and heavy damages. Both earthquakes killed 644 people and 2608 people were injured. Approximately 4000 buildings collapsed or were seriously damaged. The majority of the damaged structures were seismically insufficient, unreinforced masonry and adobe buildings in rural areas. In this paper, site surveys of the damaged masonry and adobe buildings are presented and the reasons for the caused damages are discussed in detail.

Keywords

earthquakes; logistic model; multiple objective programming; Delphi method;

Citations & Related Records

Reference

1	Song, B. and Sun, J.Q. (2012), "Sliding mode control of uncertain dynamical systems with time delay using the continuous time approximation method", Journal of Vibration and Control, 18(9), 1254-1260. DOI
2	Soundarrajan, A., Sumathi, S. and Sivamurugan, G. (2012), "Voltage and frequency control in power generating system using hybrid evolutionary algorithms", Journal of Vibration and Control, 18(2), 214-227. DOI
3	Tahavori, M. and Shaker, H.R. (2012), "Relative error model reduction via time-weighted balanced stochastic singular perturbation", Journal of Vibration and Control, 18(13), 2006-2016. DOI
4	Tajeddini, V. and Ohadi, A. (2012), "Three-dimensional vibration analysis of functionally graded thick, annular plates with variable thickness via polynomial-Ritz method", Journal of Vibration and Control,18(11), 1698-1707. DOI
5	Tang, H., Chen, J. and Dong, G. (2012), "Signal complexity analysis for fault diagnosis of rolling element bearings based on matching pursuit", Journal of Vibration and Control, 18(5), 671-683. DOI
6	Nanda, R.P., Agarwal, P. and Shrikhande, M. (2012), "Base isolation by geosynthetic for brick masonry buildings", Journal of Vibration and Control, 18(6), 903-910. DOI
7	Nath, C.N., Tajuddin, M. and Kumar, J.M. (2012), "On the parametric model of loose bonding between poroelastic half-spaces", Journal of Vibration and Control,18(9), 1261-1274. DOI
8	Nayfeh, A.H., Hammad, B.K. and Hajj, M.R. (2012), "Discretization effects on flutter aspects and control of wing/store configurations", Journal of Vibration and Control, 18(7), 1043-1055. DOI
9	Nayfeh, A.H. and Nayfeh, N.A. (2012), "Time-delay feedback control of lathe cutting tools", Journal of Vibration and Control, 18(8), 1106-1115. DOI
10	Ni, B. and Hu, C. (2012), "Dynamics of the mindlin plate and its modal vibration control", Journal of Vibration and Control, 18(13), 2039-2049. DOI
11	Omar, F.K., Moustafa, K.A.F. and Emam, S. (2012), "Mathematical modeling of gearbox including defects with experimental verification", Journal of Vibration and Control,18(9), 1310-1321. DOI
12	Panchal, V.R. and Jangid, R.S. (2012), "Performance of variable friction pendulum system for torsionally coupled structures", Journal of Vibration and Control,18(3), 323-343. DOI
13	Pham, T.T., Lamarque, C.H. and Savadkoohi, A.T. (2012), "Multi-resonance capturing in a two-degree-of-freedom system under two different harmonic excitations", Journal of Vibration and Control, 18(3), 451-466. DOI
14	Pinto, C.M. and Machado, J.A.T. (2012), "Complex-order forced van der Pol oscillator", Journal of Vibration and Control, 18(14), 2201-2209. DOI
15	Pothula, A., Gupta, A. and Kathawate, G.R. (2012), "Fatigue failure in random vibration and accelerated testing", Journal of Vibration and Control,18(8), 1199-1206. DOI
16	Rath, M.K. and Sahu, S.K. (2012), "Vibration of woven fiber laminated composite plates in hygrothermal environment", Journal of Vibration and Control, 18(13), 1957-1970 DOI
17	Raftoyiannis, I.G., Avraam, T.A. and Michaltsos, G.T. (2012), "A new approach for loads moving on infinite beams resting on elastic foundation", Journal of Vibration and Control,18(2), 1828-1836. DOI
18	Ruan, M., Wang, Z.M. and Wang, Y. (2012), "Dynamic stability of functionally graded materials skew plates subjected to uniformly distributed tangential follower forces", Journal of Vibration and Control, 18(7), 913-923. DOI
19	Saha, A., Pandey, S.S., Bhattacharya, B. and Wahi, P. (2012), "Analysis and control of friction-induced oscillations in a continuous system", Journal of Vibration and Control, 18(3), 467-480. DOI
20	Saadatmandi, A. and Dehghan, M. (2012), "A method based on the tau approach for identification of a time-dependent coefficient in the heat equation subject to an extra measurement", Journal of Vibration and Control, 18(8), 1125-1132 DOI
21	Mahmoud, G.M. and Ahmed, M.E. (2012), "A hyperchaotic complex system generating two-, three-, and four-scroll attractors", Journal of Vibration and Control, 18(6), 841-849. DOI
22	Mamani, G., Becedas, J. and Feliu, V. (2012), "Sliding mode tracking control of a very lightweight single-link flexible robot robust to payload changes and motor friction", Journal of Vibration and Control, 18(8), 1141-1155. DOI
23	Manna, M.C. (2012), "Free vibration of tapered isotropic rectangular plates", Journal of Vibration and Control, 18(1), 76-91. DOI
24	Mansour, S., Arzanpour, S. and Golnaraghi, F. (2012), "Design of a solenoid valve based active engine mount", Journal of Vibration and Control, 18(8), 1221-1232. DOI
25	Maruyama, S., Nagai, K.I., Sogamoto, D. and Yamaguchi, T. (2012), "Experiments on chaotic vibrations of a post-buckled cantilevered beam connected by a string to an axial spring", Journal of Vibration and Control, 18(2), 163-174. DOI
26	May, J.E. and Menzemer, C.C. (2012), "Concept demonstration of modal damping, a nonlinear structural vibration control scheme applied to a small scale vibrating aluminum cantilever model", Journal of Vibration and Control, 18(3), 357-365. DOI
27	May, J.E. and Menzemer, C. (2012), "Modal damping effects on the spatial distribution of anelastic damped vibration energy for a baseline cantilever structure", Journal of Vibration and Control,18(10), 1575-1582. DOI
28	Meissner, M. (2012), "The discrete Hilbert transform and its application to analysis of reverberant decay of modal vibrations in enclosures", Journal of Vibration and Control,18(11), 1595-1606. DOI
29	McNeill, S.I. (2012), "An analytic formulation for blind modal identification", Journal of Vibration and Control, 18(13), 2111-2121. DOI
30	Mei, C. (2012), "Studying the effects of lumped end mass on vibrations of a Timoshenko beam using a wave-based approach", Journal of Vibration and Control, 18(5), 733-742. DOI
31	Meng, T. and Hong-Xing, H. (2012), "Improved low-frequency performance of a composite sound absorption coating", Journal of Vibration and Control, 18(1), 48-57. DOI
32	Moghaddas, M., Esmailzadeh, E., Sedaghati, R. and Khosravi, P. (2012), "Vibration control of Timoshenko beam traversed by moving vehicle using optimized tuned mass damper", Journal of Vibration and Control, 18(6), 757-773. DOI
33	Mohamadnejad, M., Gholami, R., Ramezanzadeh, A. and Jalali, M.E. (2012), "Prediction of blast-induced vibrations in limestone quarries using Support Vector Machine", Journal of Vibration and Control, 18(9), 1322-1329. DOI
34	Montseny, G. (2012), "Diffusive wave-absorbing control: example of the boundary stabilization of a thin flexible beam", Journal of Vibration and Control,18(11),1708-1721. DOI
35	Nakata, N. (2012), "A multi-purpose earthquake simulator and a flexible development platform for actuator controller design", Journal of Vibration and Control,18(10)1552-1560. DOI
36	Krauss, R.W. (2012), "Computationally efficient modeling of flexible robots using the transfer matrix method", Journal of Vibration and Control, 18(5), 596-608. DOI
37	Duan, S., Ni, J. and Ulsoy, A.G. (2012), "Decay function estimation for linear time delay systems via the Lambert W function", Journal of Vibration and Control, 18(10), 1462-1473. DOI
38	Dehghan, H. and Hajarian, M. (2012), "Convergence of the descent Dai-Yuan conjugate gradient method for unconstrained optimization", Journal of Vibration and Control, 18 (9), 1249-1253. DOI
39	Didier, J., Faverjon, B. and Sinou, J.J. (2012), "Analysing the dynamic response of a rotor system under uncertain parameters by polynomial chaos expansion", Journal of Vibration and Control, 18(5), 712-732. DOI
40	Dogan, M. and Morgul, O. (2012), "Boundary control of a rotating shear beam with observer feedback", Journal of Vibration and Control, 18(14), 2257-2265. DOI
41	Duc, N.D., Vu, N.L., Tran, D.T. and Bui, H.L. (2012), "A study on the application of hedge algebras to active fuzzy control of a seism-excited structure", Journal of Vibration and Control, 18, 2186-2200. DOI
42	Li, C., Liang, M., Wang, Y. and Dong, Y. (2012), "Vibration suppression using two-terminal flywheel. Part II: application to vehicle passive suspension", Journal of Vibration and Control, 18(9), 1353-1365. DOI
43	Kuo, C.F.J., Huy, V.Q., Chiu, C.H. and Chiu, S.F. (2012), "Dynamic modeling and control of an atomic force microscope probe measurement system", Journal of Vibration and Control, 18(1), 101-116. DOI
44	Lacarbonara, W., Yabuno, H. and Yoshizawa, M. (2012), "Experiments in dynamics and control", Journal of Vibration and Control, 18(4), 483. DOI
45	Li, C., Liang, M., Wang, Y. and Dong, Y. (2012), "Vibration suppression using two-terminal flywheel. Part I: modeling and characterization", Journal of Vibration and Control, 18(8), 1096-1105. DOI
46	Li, H., Liao, X. and Lei, X. (2012), "Two fuzzy control schemes for Lorenz-Stenflo chaotic system", Journal of Vibration and Control, 18(11), 1675-1682. DOI
47	Liu, J., Wang, W. and Ma, F. (2012), "Bearing system health condition monitoring using a wavelet cross-spectrum analysis technique", Journal of Vibration and Control, 18(7), 953-963. DOI
48	Li, F.M., Song, Z.G. and Chen, Z.B. (2012), "Active vibration control of conical shells using piezoelectric materials", Journal of Vibration and Control, 18(14), 2234-2256. DOI
49	Liu, Z.S. and Wu, Z.G. (2012), "Iterated schemes for dynamic condensation of structures with general viscous damping distributions", Journal of Vibration and Control, 18(7), 1067-1078. DOI
50	Liu, Y.T., Chiang, W.L., Chen, C.W., Hsu, W.K., Lin, C.W., Chiou, D.J. and Huang, P.C. (2012), "Structural system identification for vibration bridges using the Hilbert-Huang transform", Journal of Vibration and Control, 18(13), 1939-1956. DOI ScienceOn
51	Feng, J., Wang, Y. and Zhu, W.Q. (2012), "Robustness of feedback stabilization of quasi non-integrable Hamiltonian systems with parametric uncertainty", Journal of Vibration and Control, 18(5), 622-631. DOI
52	Estupinan, E.A. and Santos, I.F. (2012), "Radial oil injection applied to main engine bearings: evaluation of injection control rules", Journal of Vibration and Control, 18(5), 587-595. DOI
53	Erkaya, S. (2012), "Analysis of the vibration characteristics of an experimental mechanical system using neural networks", Journal of Vibration and Control, 18(13), 2059-2072. DOI
54	Faieghi, M.R., Delavari, H. and Baleanu, D. (2012), "Control of an uncertain fractional-order Liu system via fuzzy fractional-order sliding mode control", Journal of Vibration and Control, 18 (9), 1366-1374. DOI
55	Feng, J., Ying, Z.G., Zhu, W.Q. and Wang, Y. (2012), "A minimax stochastic optimal semi-active control strategy for uncertain quasi-integrable Hamiltonian systems using magneto-rheological dampers", Journal of Vibration and Control, 18(13), 1986-1995 DOI
56	Foda, M.A. (2012), "Vibration control and suppression of an axially moving string", Journal of Vibration and Control, 18(1), 58-75. DOI
57	Galdos, G. and Karimi, A. (2012), "A solution to the flexible transmission benchmark by convex optimization", Journal of Vibration and Control, 18(7), 964-972. DOI
58	Gallo, C.A., Tofoli, F.L., Rade, D.A. and Steffen, V. Jr. (2012), "Piezoelectric actuators applied to neutralize mechanical vibrations", Journal of Vibration and Control, 18 (11), 1650-1660. DOI
59	Chen, C.Y. and Huang, P.H. (2012), "Review of an autonomous humanoid robot and its mechanical control", Journal of Vibration and Control, 18(7), 973-982. DOI ScienceOn
60	Li, Y., Zuo, S., Lei, L., Yang, X. and Wu, X. (2012), "Analysis of impact factors of tire wear", Journal ofVibration and Control, 18(6) 833-840.
61	Li, Y., Xu, D., Fu, Y. and Zhou, J. (2012), "Chaotification and optimization design of a nonlinear vibration isolation system", Journal of Vibration and Control, 18(14), 2129-2139. DOI
62	Liu, Y.M., Zogg, M. and Ermanni, P. (2012), "An experimental comparative study on non-conventional surface and interface damping techniques for automotive panel structures", Journal of Vibration and Control, 18(14), 2210-2233. DOI
63	Luo, A.C.J. and Huang, J. (2012), "Approximate solutions of periodic motions in nonlinear systems via a generalized harmonic balance", Journal of Vibration and Control, 18(11), 1661-1674. DOI
64	Ma, C.Y., Liu, J.H. and Wang, C.L. (2012), "Chaos of a power system model and its control", Journal of Vibration and Control, 18(14), 2176-2185. DOI
65	Macha, E., Kasprzyczak, L. and Mirek, G (2012) "Digital control systems based on Matlab/Simulink software for strength machines", Journal of Vibration and Control, 18(2), 201-208. DOI
66	Huo, L., Song, G., Nagarajaiah, S. and Li, H. (2012), "Semi-active vibration suppression of a space truss structure using a fault tolerant controller", Journal of Vibration and Control, 18 (10), 1436-1453. DOI
67	Inoue, T., Niimi, H. and Ishida, Y. (2012), "Vibration suppression of the rotor system using both a ball balancer and axial control of the repulsive magnetic bearing", Journal of Vibration and Control, 18(4), 484-498. DOI
68	Jian, J. and Zhang, B. (2012), "Rolling element bearing vibration modeling with applications to health monitoring", Journal of Vibration and Control,18(12), 1768-1776. DOI
69	Cheng, M., Meng, G. and Wu, B. (2012), "Nonlinear dynamics of a rotor-ball bearing system with Alford force", Journal of Vibration and Control, 18(1), 17-27. DOI
70	Chen, C.Y. (2012), "A critical review of internal wave dynamics. Part 2 -Laboratory experiments and theoretical physics", Journal of Vibration and Control, 18(7), 983-1008. DOI ScienceOn
71	Cheng, M., Meng, G.G. and Wu, B. (2012) "Nonlinear dynamics of a rotor-ball bearing system with Alford force", Journal of Vibration and Control, 18(1), 17 -27 . DOI
72	Chen, S.H., Ho, W.H., Chou, J.H. and Lu, F. (2012) "Design of robust-stable and quadratic finite-horizon optimal active vibration controllers with low trajectory sensitivity for the uncertain flexible rotor systems via the orthogonal-functions approach and the hybrid Taguchi-genetic algorithm", Journal of Vibration and Control, 18(7), 924-940. DOI
73	Chiementin, X., Kilundu, B., Rasolofondraibe, L., Crequy, S. and Pottier, B. (2012), "Performance of wavelet denoising in vibration analysis: highlighting", Journal of Vibration and Control, 18(6), 850-858. DOI
74	Cigada, A., Manzoni, S., Redaelli, M. and Vanali, M. (2012), "Optimization of the current flowing technique aimed at semi-passive multi-modal vibration reduction", Journal of Vibration and Control, 18(2), 298-312. DOI
75	Cornejo, C. and Alvarez-Icaza, L. (2012), "Passivity based control of under-actuated mechanical systems with nonlinear dynamic friction", Journal of Vibration and Control, 18(7), 1025-1042. DOI
76	Chomette, B. and Sinou, J.J. (2012), "Crack detection based on optimal control", Journal of Vibration and Control, 18(11), 1737-1749. DOI
77	Chung, C. and Kao, I. (2012), "Green's function and forced vibration response of damped axially moving wire", Journal of Vibration and Control, 18(12), 1798-1808. DOI
78	Jovanovic, V. (2012), "A fourier series solution for the transverse vibration of a clamped beam with a torsional damper at the boundary", Journal of Vibration and Control, 18(3), 344-356. DOI
79	Jiang, Y. (2012), "Rejection of nonharmonic disturbances in nonlinear systems via the internal model approach", Journal of Vibration and Control,18(12), 1916-1921. DOI
80	Jiang, J.Q., Chen, W.Q. and Pao, Y.H. (2012), "Reverberation-ray analysis of continuous Timoshenko beams subject to moving loads", Journal of Vibration and Control, 18(6), 774-784. DOI
81	Kahrobaiyan, M., Asghari, M., Hoore, M. and Ahmadian, M.T. (2012), "Nonlinear size-dependent forced vibrational behavior of microbeams based on a non-classical continuum theory", Journal of Vibration and Control, 18(5), 696-711. DOI
82	Kang, Z., Xu, K. and Luo, Z. (2012), "A numerical study on nonlinear vibration of an inclined cable coupled with the deck in cable-stayed bridges", Journal of Vibration and Control, 18(3), 404-416. DOI
83	Kang, J.H. (2012), "Vibrations of hemi-spherical shells of revolution with eccentricity from a three -dimensional theory", Journal of Vibration and Control, 18(13), 2017-2030. DOI
84	Karri, S.K.V. and Rao, S.K.S.S. (2012), "Influence of lateral vibrations on the whirling characteristics of fear-pinion rotor system", Journal of Vibration and Control, 18(11), 1624-163. DOI
85	Khot, S.M. and Yelve, N.P. (2012), "Estimation of geometrical parameters of machine elements based on statistical methods to avoid resonance", Journal of Vibration and Control, 18(2), 209-213. DOI
86	Khot, S.M., Yelve, N.P., Tomar, R., Desai, S. and Vittal, S. (2012), "Active vibration control of cantilever beam by using PID based output feedback controller", Journal of Vibration and Control, 18(3), 366-372. DOI
87	Czop, P. (2012), "Application of inverse data-driven parametric models in the reconstruction of passenger vehicle wheel vertical movement under ride conditions", Journal of Vibration and Control, 18(8),133-1140.
88	Cong, F., Chen, J. and Dong, G. (2012), "An energy analyzing method for the assessment and diagnosis of rub-impact fault in a rotor system", Journal of Vibration and Control, 18 (12), 1865-1875 . DOI
89	Cui, Z. and Wu, B. (2012), "A new self-adaptive trust region method for unconstrained optimization", Journal of Vibration and Control, 18 (9), 1303-1309. DOI
90	Cura, F., Mura, A. and Scarpa, F. (2012), "Modal strain energy based methods for the analysis of complex patterned free layer damped plates", Journal of Vibration and Control, 18(9), 1291-1302. DOI
91	Corrigendum (2012), Journal of Vibration and Control, 18(13).
92	Das, D., Sahoo, P. and Saha, K. (2012), "A numerical analysis of large amplitude beam vibration under different boundary conditions and excitation patterns", Journal of Vibration and Control, 18(12), 1900-1915. DOI
93	Bazaei, A. and Moallem, M. (2012), "A fundamental limitation on the control of end-point force in a very flexible single-link arm", Journal of Vibration and Control, 18 (8), 1207-1220. DOI
94	Bernardini, G., Testa, C. and Gennaretti, M. (2012), "Optimal design of tonal noise control inside smart-stiffened cylindrical shells", Journal of Vibrationnd Control, 18 (8), 1233-1246 . DOI
95	Bhatti, A.Q., Khatoon, S., Mehmood, A., Dastagir, A. and Kishi, N. (2012), "Numerical study for impact resistant design of full scale arch type reinforced concrete structures under falling weight impact test", Journal of Vibration and Control, 18 (9), 1275-1283. DOI
96	Ganesh, G. and Patnaik, S.K. (2012), "Artificial neural network based proportional plus integral plus derivative controller for a brushless DC position control system", Journal of Vibration and Control, 18(14), 2164-2175. DOI
97	Kirk, R.G., Alsaeed, A. and Mondschein, B. (2012), "Turbocharger vibration shows nonlinear jump", Journal of Vibration and Control,18(10), 1454-1461. DOI
98	Komarasamy, R., Albhonso, N. and Gurusamy, G. (2012), "Order reduction of linear systems with an improved pole clustering", Journal of Vibration and Control,18(12), 1876-1885. DOI
99	Korkmaz, K.A., Nuhoglu, A., Arisoy, B. and Carhoglu, A.I. (2012), "Investigation of structural safety of existing masonry healthcare facilities in Turkey", Journal of Vibration and Control, 18(6), 867-877. DOI
100	Garcia-Perez, A., Romero-Troncoso, R.J., Cabal-Yepez, E., Osornio-Rios, R.A. and Lucio-Martinez, J.A. (2012), "Application of high-resolution spectral-analysis for identifying faults in induction motors by means of sound", Journal of Vibration and Control, 18 (11), 1585 -15941. DOI
101	Catania, G. and Sorrentino, S. (2012), "Spectral modeling of vibrating plates with general shape and general boundary conditions", Journal of Vibration and Control, 18 (11), 1607-1623. DOI
102	Gottlieb, O. and Habib, G. (2012), "Non-linear model-based estimation of quadratic and cubic damping mechanisms governing the dynamics of a chaotic spherical pendulum", Journal of Vibration and Control, 18(4), 536-547. DOI
103	Goldasz, J. and Alexandridis, A.A. (2012), "Medium- and high-frequency analysis of magnetorheological fluid dampers", Journal of Vibration and Control, 18(14), 2140-2148. DOI
104	Grasso, E., Chris, M., Janocha, H. and David, N. (2012), "generating periodic forces with the pendulum actuator", Journal of Vibration and Contro, 18(1), 3-16. DOI
105	Bui, H.L., Tran, D.T. and Vu, N.L. (2012), "Optimal fuzzy control of an inverted pendulum", Journal of Vibration and Control, 18(14), 2097-2110. DOI
106	Borre, M. and Flashner, H. (2012), "Computation of periodic solutions and their regions of attraction for flexible structures under nonlinear feedback control", Journal of Vibration and Control, 18(6), 745-756. DOI
107	Boubakir, A., Labiod, S. and Boudjema, S. (2012), "A stable self-tuning proportional-integral-derivative controller for a class of multi-input multi-output nonlinear systems", Journal of Vibration and Control, 18(2), 246-267. DOI
108	Boulkroune, A. and M'saad, M. (2012), "Fuzzy adaptive observer-based projective synchronization for nonlinear systems with input nonlinearity", Journal of Vibration and Control, 18(3), 437-450. DOI
109	Castri, de A. and Messina, A. (2012), "Exact modeling for control of flexible manipulators", Journal of Vibration and Control, 18 (10), 1526-1551 . DOI
110	Chalak, H.D., Chakrabarti, A., Iqbal, M.A. and Sheikh, A.H. (2012), "Vibration of laminated sandwich beams having soft core", Journal of Vibration and Control, 18 (10),1422-1435. DOI
111	Chaouch, D.E., Ahmed-Foitih, Z. and Khelfi, M.F. (2012), "A self-tuning fuzzy inference sliding mode control scheme for a class of nonlinear systems", Journal of Vibration and Control, 18 (10), 1494-1505. DOI
112	Chen, C.W. (2012), "Applications of the Fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system", Journal of Vibration and Control, 18 (13), 1925 -1938 . DOI ScienceOn
113	Chen, C.W., Yeh, K., Liu, K.F.R. and Lin, M.L. (2012), "Applications of fuzzy control to nonlinear time-delay systems using the linear fuzzy Lyapunov method", Journal of Vibration and Control, 18(10), 1561-1574. DOI
114	Hacioglu, Y. and Yagiz, N. (2012), "Adaptive backstepping control with estimation for the vibration isolation of buildings", Journal of Vibration and Control, 18(13), 1996-2005. DOI
115	Guo, H.Y. and Li, Z.L. (2012), "A two-stage method for damage detection using frequency responses and statistical theory", Journal of Vibration and Control, 18(2), 191-200. DOI
116	Guo, S. and Yang, S. (2012), "Wave motions in non-uniform one-dimensional waveguides", Journal of Vibration and Control, 18(1), 92-100. DOI
117	Gupta, A.K. and Sharma, P. (2012), "Effect of linear thermal gradient on vibrations of trapezoidal plates whose thickness varies parabolically", Journal of Vibration and Control, 18(3), 395-403. DOI
118	Hanieh, A.A. (2012), "Vibration isolation pad for medical purposes: modeling and simulation", Journal of Vibration and Control, 18(13), 2031-2038. DOI
119	He, J.F., Jiang, H.Z., Tong, Z.Z., Li, B.P. and Han, J.W. (2012), "Study on dynamic isotropy of a class of symmetric spatial parallel mechanisms with actuation redundancy", Journal of Vibration and Control, 18 (8), 1156-1164. DOI
120	Hoque, M.E., Mizuno, T., Ishino, Y. and Takasaki, M. (2012), "A modified zero-power control and its application to vibration isolation system", Journal of Vibration and Control, 18 (12), 1788-1797 . DOI
121	Huang, C.F., Lin, J.S., Liao, T.L. and Yan, J.J. (2012), "Quasi sliding mode control for chaotic symmetric gyros with linear-plus-cubic damping and input nonlinearity", Journal of Vibration and Control, 18 (9), 1330 -1335. DOI
122	Huang, K., Zhang, Y. and Yu, F. (2012). "Predictive controller design for electromagnetic suspension based on mixed logical dynamical model", Journal of Vibration and Control, 18 (8), 1165-1176. DOI
123	Abdelaziz, T.H.S. (2012), "Parametric eigenstructure assigmnent using state-derivative feedback for linear systems", Journal of Vibration and Control, 18(12), 1809-1827. DOI
124	Chen, C.W. (2012), "Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review", Journal of Vibration and Control, 18 (12),1886-1899 . DOI ScienceOn
125	Chen, C.Y. (2012), "A critical review of internal wave dynamics. Part 1 -Remote sensing and in-situ observations", Journal of Vibration and Control, 18(3), 417-436. DOI ScienceOn
126	Chen, C.Y., Shih, B.Y., Shih, C.H. and Chou, W.C. (2012), "The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks", Journal of Vibration and Control, 18(5), 577-586. DOI ScienceOn
127	Abdel-Rohman, M. (2012), "The influence of the higher order modes on the dynamic response of suspension bridges", Journal of Vibration and Control, 18(9), 1380-1405. DOI
128	Ahmed, M.K. (2012), "A new vibration approach of an elastic oval cylindrical shell with varying circumferential thickness", Journal of Vibration and Control, 18(1), 117-131. DOI
129	Aldair, A.A. and Wang, W.J. (2012), "A neurofuzzy controller for full vehicle active suspension systems", Journal of Vibration and Control, 18(12), 1837-1854. DOI
130	Alhazza, K.A. and Majeed, M.A. (2012), "Free vibrations control of a cantilever beam using combined time delay feedback", Journal of Vibration and Control, 18(5), 609-621. DOI
131	Alphin, M.S., Sankaranarayanasamy, K. and Sivapirakasam, S.P. (2012), "Segmental vibration transmissibility of seated occupant from lumped parameter models", Journal of Vibration and Control, 18(11), 1683-1689. DOI
132	An, X., Jiang, D., Chen, J. and Liu, C. (2012), "Application of the intrinsic time-scale decomposition method to fault diagnosis of wind turbine bearing", Journal of Vibration and Control, 18(2), 240-245. DOI
133	AlSaleh, R., Casciati, F., El-Attar, A. and El-Habbal, I. (2012), "Experimental validation of a shape memory alloy retrofitting application", Journal of Vibration and Control, 18(1), 17-27. DOI
134	Altug Bicak, M.M. and Rao, M.D. (2012), "Coupled squeeze film analysis by Reissner-Mindlin plate elements", Journal of Vibration and Control, 18(5), 632-640. DOI
135	Amarnath, M., Chandramohan, S. and Seetharaman, S. (2012), "Experimental investigations of surface wear assessment of spur gear teeth", Journal of Vibration and Control, 18(7), 1009-1024. DOI
136	Babu, S. and Sambhaji, S.K. (2012), "Effects of heat and mass transfer on nonlinear magneto-hydrodynamic boundary layer flow of rheological damper fluid through annular duct", Journal of Vibration and Control,18 (13), 2085-2092. DOI
137	Bacon, M. and Olgac, N. (2012), "Swarm herding using a region holding sliding mode controller", Journal of Vibration and Control, 18(7), 1056-1066. DOI
138	Baferani, A.H., Saidi, A.R. and Jomehzadeh, E. (2012), "Exact analytical solution for free vibration of functionally graded thin annular sector plates resting on elastic foundation", Journal of Vibration and Control, 18(2), 246-267. DOI
139	Barton, D.A.W., Mann, B.P. and Burrow, S.G. (2012), "Control-based continuation for investigating nonlinear experiments", Journal of Vibration and Control, 18(4), 509-520. DOI
140	Ajzen, I. (1991), "The theory of planned behavior", Organizational Behavior and Human Decision Processes, 50,179-211. DOI
141	Zargar, B., Fahim, A. and Jnifene, A. (2012), "Development, validation and parameter sensitivity analyses of a nonlinear mathematical model of air springs", Journal of Vibration and Control,18(12), 1777-1787. DOI
142	Abbas, I.A. and Othman, M.I.A. (2012), "Generalized thennoelastic interaction in a fiber-reinforced anisotropic half-space under hydrostatic initial stress", Journal of Vibration and Control, 18(2), 175-182. DOI
143	Yina, G., Qinghua, W., Shuhua, H. and Naik, G.R. (2012), "Remote rapid prototyping manufacturing network using optimization recurrent hidden Markov models", Journal of Vibration and Control, 18(14), 2122-2128 DOI
144	Yu, P.P. and Huang, B.W. (2012), "Time dependent buckling and critical speed in a twisted micro drilling process", Journal of Vibration and Control, 18(13), 2050-2058. DOI
145	Zou, L., Huang, K., Wang, L., Butterworth, J. and Ma, X. (2012), "Vibration control of adjacent buildings considering pile-soil-structure interaction", Journal of Vibration and Control, 18(12), 684-695. DOI
146	Wilcox, B. and Dankowicz, H. (2012), "An experimental testbed for investigating nonsmooth bifurcations in an electromechanical system", Journal of Vibration and Control, 18(4), 521-535. DOI
147	Wu, T.Y., Hong, H.C. and Chung, Y.L. (2012), "A looseness identification approach for rotating machinery based on post-processing of ensemble empirical mode decomposition and autoregressive modeling", Journal of Vibration and Control, 18(6), 796-807. DOI
148	Xie, X., Zhang, D.W.H., Shen, Y. and Mikio, Y. (2012), "Low-frequency noise radiation from traffic-induced vibration of steel double-box girder bridge", Journal of Vibration and Control, 18(3), 373-384. DOI
149	Xu, Z.D., Huang, X.H. and Lu, L.H. (2012), "Experimental study on horizontal performance of multi-dimensional earthquake isolation and mitigation devices for long-span reticulated structures", Journal of Vibration and Control, 18(7), 941-952. DOI
150	Xiuchang, H., Shiyin, X., Aihua, J. and Hongxing, H. (2012), "Modeling and optimization of floating raft systems in submarines under different objectives by using hybrid genetic algorithm", Journal of Vibration and Control, 18(2), 268-297. DOI
151	Xu, Z.D., Tu, Q. and Guo, Y.F. (2012), "Experimental study on vertical performance of multidimensional earthquake isolation and mitigation devices for long-span reticulated structures", Journal of Vibration and Control, 18(13), 1971-1985. DOI
152	Yamashita, K., Kitajo, K., Wada, S., Sugiura, T. and Yabuno, H. (2012), "Impact oscillations with multiple modes between a pantograph and an overhead rigid conductor line in a railway current collection system", Journal of Vibration and Control, 18(4), 499-508. DOI
153	Yang, Y.S., Liao, T.L. and Yan, J.J. (2012), "Sliding mode control design for generalized projective synchronization of unified chaotic systems containing nonlinear inputs", Journal of Vibration and Control, 18(6), 808-816. DOI
154	Yang, C.Y., Hsieh, C.H., Chung, L.L., Chen, H.M. and Wu, L.Y. (2012), "Effectiveness of an eccentric rolling isolation system with friction damping", Journal of Vibration and Control, 18(14), 2149-2163. DOI
155	Yao, J. and Wang, C. (2012), "Model reference adaptive control for a hydraulic underwater manipulator", Journal of Vibration and Control, 18(6), 893-902. DOI
156	Yao, J., Di, D. and Han, J. (2012), "Adaptive notch filter applied to acceleration harmonic cancellation of electro-hydraulic servo system", Journal of Vibration and Control, 18(5), 641-650. DOI
157	Tong, Z., Long-Xiang, C. and Guo-ping, C. (2012), "Experimental study of H ${\infty}$ control for a flexible plate",Journal of Vibration and Control, 18(11)1631-1649. DOI
158	Yavuz, H., Mistikoglu, S. and Kapucu, S. (2012), "Hybrid input shaping to suppress residual vibration of flexible systems", Journal of Vibration and Control, 18(1), 132-140. DOI
159	Yeh, K., Chen, C.W., Lo, D.C. and Liu, K.F.R. (2012), "Neural-network fuzzy control for chaotic tuned mass damper systems with time delays", Journal of Vibration and Control, 18(6), 785-795. DOI ScienceOn
160	Yina, G. and Dawei, Z. (2012), "Single channel surface electromyography blind recognition model based on watermarking", Journal of Vibration and Control, 18(1), 42-47. DOI
161	Tatari, M. and Dehghan, M. (2012), "An efficient method for solving multi-point boundary value problems and applications in physics", Journal of Vibration and Control, 18(8), 1116-1124. DOI
162	Tsai, N.C., Chen, D.C., Shih, L.W. and Chiang, C.W. (2012), "Model reduction and composite control for overhead hoist transport system by singular perturbation technique", Journal of Vibration and Control, 18(8), 1081-1095. DOI
163	Tseng, C.P., Chen, C.W. and Liu, K.F.R. (2012), "Risk control allocation model for pressure vessels and piping project", Journal of Vibration and Control, 18(3), 385-394. DOI ScienceOn
164	Tseng, W.K., Rafaely, B. and Elliott, S. (2012), "A novel method of designing stable feedback controllers for local control of sound", Journal of Vibration and Control, 18(5), 651-658. DOI
165	Venkatachalam, R., Prabu, S.B. and Raja, K.V. (2012), "Finite element based investigation on vibrational performance of a sandwich system", Journal of Vibration and Control,18(9) 1284-1290.
166	Wang, H., Shen, X.H., Zhang, L.X. and Zhu, X.J. (2012), "Active vibration suppression of flexible structure using a LMI-based control patch", Journal of Vibration and Control, 18(9) 1375-1379.
167	Vidrih, Z., Fischinger, M. and Isakovi, T. (2012), "Numerical investigation on smart magnetically controlled elastomeric bearings", Journal of Vibration and Control, 18(13), 2073-2084. DOI
168	Wang, F., Huo, S., Yue, Z. and Qian, W. (2012), "Further study on aeroelastic response of aircraft wing with freeplay", Journal of Vibration and Control, 18(10), 1690-1697. DOI
169	Wang, G., Zhao, K., Li, X., Li, L. and Wang, J. (2012), "Arrangement optimization of hammers and fenders on Scrap Metal Shredder using ant colony algorithms", Journal of Vibration and Control, 18(5), 659-670. DOI
170	Wang, J., Duan, F., Jiang, J.H., Lu, L.X. and Wang, Z.W. (2012), "Dropping damage evaluation for a hyperbolic tangent cushioning system with a critical component", Journal of Vibration and Control,18(10), 1417-1421. DOI
171	Wang, J. and Li, Q. (2012), "Finite element analysis of stiffness characteristics of an electromagnetic device", Journal of Vibration and Control, 18(1), 141-160. DOI
172	Wang, J., Mak, C.M. and Yun, Y. (2012), "A methodology for direct identification of characteristic wave-types in a finite periodic dual-layer structure with transverse connection", Journal of Vibration and Control, 18(9), 1406-1414. DOI
173	Wang, L. (2012), "Vibration analysis of nanotubes conveying fluid based on gradient elasticity theory", Journal of Vibration and Control, 18(2), 313-320. DOI
174	Wang, Z., Chen, J., Zhou, Y. and Xiao, W. (2012), "A new method for blind extraction of cyclostationary signals", Journal of Vibration and Control, 18(6), 878-892. DOI
175	Sezer, S. and Atalay, A.E. (2012), "Application of fuzzy logic based control algorithms on a railway vehicle considering random track irregularities", Journal of Vibration and Control,18(8), 1177-1198. DOI
176	Sari, M.S. and Butcher, E.A. (2012), "Free vibration analysis of rectangular and annular Mindlin plates with undamaged and damaged boundaries by the spectral collocation method", Journal of Vibration and Control,18(11), 1722-1736. DOI
177	Sayyad, F.B. and Kumar, B. (2012), "Identification of crack location and crack size in a simply supported beam by measurement of natural frequencies", Journal of Vibration and Control, 18(2), 183-190. DOI
178	Scurtu, P.R., Clark, M. and Zu, J.W. (2012), "Coupled longitudinal and transverse vibration of automotive belts under longitudinal excitations using analog equation method", Journal of Vibration and Control, 18(9), 1336-1352. DOI
179	Shen, G., Guang-ming, L.V., Zheng-mao, Y., Da-cheng, C. and Jun-wei, H. (2012), "Feed-forward inverse control for transient waveform replication on electro-hydraulic shaking table", Journal of Vibration and Control,18(10), 1474-1493. DOI
180	Shih, B.Y., Chen, C.Y., Chang, H. and Ma, J.M. (2012), "Dynamics and control for robotic manipulators using a greedy algorithm approach", Journal of Vibration and Control, 18(6), 859-866. DOI ScienceOn
181	Shih, B.Y., Chen, C.Y. and Chou, W. (2012), "An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors", Journal of Vibration and Control, 18(12), 1855-1864. DOI ScienceOn
182	Silva, M.F. and Machado, J.A.T. (2012), "A literature review on the optimization of legged robots", Journal of Vibration and Control, 18(12), 1753-1767. DOI
183	Sina, I.K. (2012), "Robust control and unbalance compensation of rotor/active magnetic bearing systems",Journal of Vibration and Control, 18(6), 817-832. DOI