DOI QR코드

DOI QR Code

부모멘트부의 효율성을 고려한 외부강선으로 보강된 콘크리트 거더 연속교의 거동

Structural Behavior of Concrete Girder Continuous Bridges Strengthened with External Tendons Considering the Efficiency at Negative Moment Region

  • 한만엽 (아주대학교 건설시스템공학과) ;
  • 조병두 (아주대학교 건설시스템공학과) ;
  • 전세진 (아주대학교 건설시스템공학과)
  • Han, Man-Yop (Dept. of Civil Systems Engineering, Ajou University) ;
  • Cho, Byeong-Du (Dept. of Civil Systems Engineering, Ajou University) ;
  • Jeon, Se-Jin (Dept. of Civil Systems Engineering, Ajou University)
  • 투고 : 2013.04.18
  • 심사 : 2013.07.27
  • 발행 : 2013.10.31

초록

이 연구에서는 연속 거더교의 외부강선 보강 효과를 극대화할 수 있는 효율적인 방법을 도출하였다. 등가하중개념을 적용하여 기존 방법 대비 제안된 보강 방법의 개선점을 명확히 분석하였다. 보강 효과의 검증을 위해 연속보의 외부강선 보강 실험을 실시하여 외부강선에 의한 내하력 향상 효과를 고찰하였다. 연속보 실험체는 콘크리트 거더 연속교의 일반적인 시공법과 동일하게 바닥판 슬래브 부분만을 연속화하여 제작하였다. 실험 결과 동일한 크기의 외력이 작용할 때 외부강선이 보강된 실험체는 보강되지 않은 실험체에 비해 처짐이나 변형률이 대폭 감소하는 경향을 보였으며, 부재의 강성도 또한 증가하였다. 특히 제안된 방법은 연속교 중간 지점부의 부모멘트에 의한 바닥판의 인장응력을 효과적으로 감소시킬 수 있음이 확인되었다.

An effective method was proposed in this study which can improve the strengthening effect of continuous girder bridges by external tendons. The improvement of the proposed strengthening method in comparison with conventional methods was analyzed by applying equivalent load concept. In order to verify the strengthening effect, the enhancement of load-carrying capacity achieved by external prestressing was investigated through the test of continuous beams that were or were not strengthened by the external prestressing. The continuous beams were fabricated by making the deck slab continuous according to general construction practice of an actual concrete girder bridge. The test results showed that the deflections and strains of the strengthened beam were significantly reduced when comparing with those of the non-strengthened beam for the same level of external loads, and the stiffness of the member increased by strengthening. In particular, it was verified that the proposed method can effectively reduce the tensile stresses of the deck caused by negative moment at the intermediate supports of a continuous bridge.

키워드

참고문헌

  1. Expressway and Transportation Research Institute, A Study on the Continuation Method of Precast Prestressed Concrete Girder Bridges, Expressway and Transportation Research Institute, Korea, 1999, 193 pp.
  2. Geren, K. L. and Tadros, M. K., "The NU Precast/ Prestressed Concrete Bridge I-Girder Series," PCI Journal, Vol. 39, No. 3, 1994, pp. 26-38. https://doi.org/10.15554/pcij.05011994.26.39
  3. Sun, C. H., Lee, J. S., and Kim, I. H., "A Study on the Continuation Effect of the PC Beam Bridge Reinforced by Span-Jointing of Slab," Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 6, No. 4, 2002, pp. 225-232.
  4. Yoo, S. W., Yang, I. H., and Suh, J. I., "Experiment of Flexural Behavior of Prestressed Concrete Beams with External Tendons According to Tendon Area and Tendon Force," Journal of the Korea Concrete Institute, Vol. 21, No. 4, 2009, pp. 513-521. https://doi.org/10.4334/JKCI.2009.21.4.513
  5. Lee, B. J., Park, J. G., Kim, M. Y., Shin, H. M., and Park, C. H., "Experimental Study on Flexural Behavior of PSC I Girder and the Effect of External Prestressing," Journal of the Korea Concrete Institute, Vol. 19, No. 6, 2007, pp. 755-762. https://doi.org/10.4334/JKCI.2007.19.6.755
  6. Korea Infrastructure Safety and Technology Corporation (KISTEC), Development of Methods of Evaluation of Prestressing Force and Assessment of Load-Carrying Capacity of the Bridges Strengthened with External Tendons, KISTEC, Korea, 2007, 238 pp.
  7. McConell, V. P., "Bridge Column Retrofit : Hybond Unifabric," High Performance Composites, 1993, pp. 19-20.
  8. American Concrete Institute(ACI), External Prestressing in Bridges, SP-120, Naaman, A. and Breen, J., Eds., ACI, Michigan, U. S., 1990, 458 pp.
  9. Han, M. Y. and Lee, S. W., "Analysis of Strengthening Amount of External Tendon Strengthening Method," Proceedings of Korean Society of Civil Engineers Annual Convention, Korea, 2004, pp. 4766-4771.
  10. Han, M. Y., Lee, J. H., and Lee, S. Y., "A Study on Development of Tensile End Bracket for External Prestressing Methods," Journal of the Korean Society of Civil Engineers, Vol. 21, No. 5A, 2001, pp. 611-618.
  11. Tan, K. H. and Ng, C. K., "Effects of Deviators and Tendon Configuration on Behavior of Externally Prestressed Beams," ACI Structural Journal, Vol. 94, No. 1, 1997, pp. 13-22.
  12. Shin, J. W., An Experimental Study of External Prestress Strengthening Method for Continuous Bridges, Master's Thesis, Ajou University, Korea, 2007, 108 pp.
  13. Kwak, H. G., Son, J. K., Kim, S. Y., and Park, Y. H., "Development of Analysis Program for PSC Beams with Unbonded External Tendons," Journal of the Korean Society of Civil Engineers, Vol. 26, No. 2A, 2006, pp. 247-260.
  14. Park, J. G., Lee, B. J., Kim, M. Y., and Shin, H. M., "Analytical Method on PSC I Girder with Strengthening of External Tendon," Journal of the Korea Concrete Institute, Vol. 20, No. 6, 2008, pp. 697-704. https://doi.org/10.4334/JKCI.2008.20.6.697
  15. Choi, K. C. and Lee, J. S., "Nonlinear Analysis of PSC Girders with External Tendons," Journal of the Computational Structural Engineering Institute of Korea, Vol. 23, No. 3, 2010, pp. 303-314.
  16. Crozier, A. C., "Strengthening a Fifty-Year-Old Viaduct," Concrete, Vol. 8, No. 7, 1974, pp. 22-25.
  17. Moreau, P. and Muller, J., "Strengthening by Means of Additional Prestressing of the Pont de Givors," Annales de L'Institut Technique du Batiment et des Travaux, No. 411, 1983, pp. 105-109.
  18. Schuebiger, E. and Wachter, H. R., "Utilization of Prestressing for the Restoration of the Swiss Railway Overpass near Lachen," Schweizersche Bauzeitung, Vol. 73, No. 31, 1955, pp. 475-478.
  19. Vernigora, E., Marcil, J. R. M., Slater, W. M., and Aiken, R. V., "Bridge Rehabilitation and Strengthening by Continuous Post-Tensioning," PCI Journal, Vol. 14, No. 2, 1969, pp. 88-104. https://doi.org/10.15554/pcij.04011969.88.104
  20. Virlogeux, M., "External Prestressing," Annales de L'Institut Technique du Batiment et des Travaux, No. 420, 1983, pp. 115-124.
  21. Tadros, M. K., Ficence, J. A., Einea, A., and Holdsworth, S., "A New Technique to Create Continuity in Prestressed Concrete Members," PCI Journal, Vol. 38, No. 5, 1993, pp. 30-37. https://doi.org/10.15554/pcij.09011993.30.37
  22. Korea Road and Transportation Association (KRTA), Standard Specifications for Highway Bridges, KRTA, Korea, 2013, 420 pp.
  23. American Association of State Highway and Transportation Officials (AASHTO), Standard Specifications for Highway Bridges, 17th Ed., AASHTO, Washington, D. C., U. S., 2002, 829 pp.
  24. Shin, H. M., Prestressed Concrete, 10th Ed., Dongmyungsa, Korea, 2008, 504 pp.
  25. Lin, T. Y., "Load Balancing Method for Design and Analysis of Prestressed Concrete Structures," ACI Journal, Vol. 60, No. 6, 1963, pp. 719-742.
  26. Lin, T. Y. and Burns, N. H., Design of Prestressed Concrete Structures, 3rd Ed., John Wiley and Sons, New York, U. S., 1981, 646 pp.
  27. Oh, B. H. and Jeon, S. J., "Limitations and Realistic Application of Equivalent Load Methods in Pre-Stressed Concrete Structures," Magazine of Concrete Research, Vol. 54, No. 3, 2002, pp. 223-231. https://doi.org/10.1680/macr.2002.54.3.223
  28. Shin, H. M. and Lee, J. H., Reinforced Concrete, 11th Ed., Dongmyungsa, Korea, 2013, 707 pp.