DOI QR코드

DOI QR Code

Finite Element Analysis Method for Impact Fracture Prediction of A356 Cast Aluminum Alloy

A356 주조 알루미늄 합금의 충격 파괴 예측을 위한 유한요소해석 기법 연구

  • Jo, Seong-Woo (Dept. of Virtual Engineering, University of Science and Technology) ;
  • Park, Jae-Woo (Dept. of Virtual Engineering, University of Science and Technology) ;
  • Kwak, Si-Young (Center for e-Design, Korea Institute of Industrial Technology(Dept. of Virtual Engineering, University of Science and Technology))
  • 조성우 (과학기술연합대학원대학교 가상공학과) ;
  • 박재우 (과학기술연합대학원대학교 가상공학과) ;
  • 곽시영 (한국생산기술연구원 사이버설계센터(과학기술연합대학원대학교 가상공학과))
  • Received : 2012.11.15
  • Accepted : 2013.04.15
  • Published : 2013.04.30

Abstract

Generally, metal is the most important material used in many engineering applications. Therefore, it is important to understand and predict the damage of metal as result of the impact. The objective of this research is to evaluate the damage criterion on the impact performance of A356 Al-alloy castings. Both experimental method and computational analysis were used to achieve the research objective. In this paper, we performed impact test according to various impact velocities to the A356 cast aluminium specimen for damage prediction. Impact computational simulation was done by applying properties obtained from the tensile test, and damages was predicted according to the damage criteria based plastic work. The good agreement of the results between the experiment and computer simulation shows that the reliability of the proposed FE simulation method to predict fracture of A356 casting components by impact.

Keywords

References

  1. Riesner M, Zebrowsk MP and Gavalier RJ, The Sixth International Conference on Vehicle Structural Mechanics, Society of Automotive Engineers, "Computer Simulation of Wheel Impact Test", Detroit, MI, (1986) 269-275.
  2. Hooputra H, Gese H, Dell H and werner H, 2004 International Journal of Crash, "A Comprehensive Failure Model for Crashworthiness simulation of Aluminium Extrusions", (2004) 449-463.
  3. Dey S, Borvik T, Hopperstad OS and Langseth M, International journal of Impact Engineering "On the influence of constitutive relation in projectile impact of steel plates", 34 (2007) 464-486. https://doi.org/10.1016/j.ijimpeng.2005.10.003
  4. Galvez F, Cendon D, Garcia N, Enfedaque A and Sanchez- galvez V, Engineering Failure Analysis, "Dynamic fracture thoughness of a high strength armor steel", 16 (2009) 2567-2575. https://doi.org/10.1016/j.engfailanal.2009.04.020
  5. Loh Y. -L., "Finite Element Impact Analysis and Test of 13 Degree Disc Wheel and a Study on its Failure Criteria", M.S. Thesis, National Taiwan University, (2004).
  6. Chan H. -T., "Analysis of Impact Test for Aluminum Alloy Wheel", M.S. Thesis, National Yunlin University of Science & Technology, (2006).
  7. Dowling NE, Mechanical Behavior of Materials, 3rd Ed., Pearson Education, Inc., New Jersey, USA (2007) 624.
  8. Manish D. Dighe, Arun M. Gokhale, Mark F. Horstemeyer, and D. A Mosher, Metallurgical and Materials Transactions A, "Effect of Strain Rate on Damage Evolution in a Cast Al-Si- Mg Base Alloy", 31A (2000) 3.
  9. Tucker MT, Horstemeyer MF, Whittington RW Solanki KN and Gullett PM, Mechanics of Materials, "The Effect of varying strain rates and stress states on the plasticity, damage, and fracture of aluminum alloys", 42 (2010) 895-907. https://doi.org/10.1016/j.mechmat.2010.07.003

Cited by

  1. Effect of Shrinkage Defect on Fracture Impact Energy of A356 Cast Aluminum Alloy vol.34, pp.1, 2014, https://doi.org/10.7777/jkfs.2014.34.1.022
  2. Design Improvement of a Water Nozzle in a Demolition Water Vehicle vol.28, pp.1, 2013, https://doi.org/10.7735/ksmte.2019.28.1.48