참고문헌
- Douty, R.T. and McGuire, W. (1965) High strength bolted moment connections, J. Struct. Div., ASCE, Vol. 91, No. 2, pp.101-128.
- Agerskov, H. (1976) High strength bolted connections subject to prying. Journal of Structural Engineering Div., ASCE, Vol. 102, No. 1, pp.161-175.
- Struik, J.H.A. and de Back, J. (1969) Tests on bolted T-stubs with respect to bolted beam-tocolumn connections, Report 6-69-13, Stevin Laboratory, Delft University of Technology, Delft, The Netherlands.
- Swanson, J.A. (1999) Characterization of the strength, stiffness, and ductility behavior of T-stub connections, Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, USA.
- Swanson, J.A. (2002) Ultimate strength prying models for bolted T-stub connections, Engineering Journal, AISC, Vol. 39, No. 3, pp.136-147.
- Jaspart, J.P., Steenhuis, M., and Weinand, K. (1995) The stiffness model of Revised Annex J of Eurocode 3, Proceedings of 3rd International Workshop on Connection in Steel Structures, Trento, pp.28-31.
- Jaspart, J.P. and Maquoi, R. (1995) Effect of bolt preloading on joint behaviour, Steel Structures, Eurosteel '95, edited by Kounadis, Balkema.
- Faella, C., Piluso, V., and Rizzano, G. (1996) Some proposals to improve EC3-Annex J Approach for predicting the moment-rotation curve of extended end plate connections, Costruzioni Metalliche, No. 4.
- Faella, C., Piluso, V., and Rizzano, G. (1998) Experimental analysis of bolted connections: snug versus preloaded bolts, Journal of Structural Engineering, ASCE, Vol. 124, No. 7, pp.765-774. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(765)
- 양재근, 박재호, 백민창 (2012) 고력볼트로 체결된 T-stub의 지레작용력 및 접촉력예측모델, 2012년도 추계학술발표논문집, 대한건축학회, 제32권, 제2호, pp.465-466. Yang, J.G., Park, J.H., and Back, M.C. (2012) Prediction models for the prying action force and contact force of a T-stub fastened by highstrength bolts, Proceedings of Annual AIK Conference, AIK, pp.465-466.
- AISC (2010) Steel Construction Manual, 14th Ed., American Institute of Steel Construction, Chicago, II. pp. 9-10 - 9-13.
- Lemonis, M.E. and Gantes, C.J. (2006) Incremental modeling of T-stub connections, Jounal of Mechanics of Materials and Structures, Vol. 1, No. 7, pp. 1135-1159. https://doi.org/10.2140/jomms.2006.1.1135
- Thornton, W.A. (1985) Prying action: A general treatment, Engineering Journal, AISC, Vol. 22, No. 2, pp.67-75.
- Astaneh, A. (1985) Procedure for a design and analysis of hanger-type connections, Engineering Journal, AISC, Vol. 22, No. 2, pp.63-66.
- ABAQUS. (2007) User's manual, I-IV(Version 6.9)
- Richard, R.M., Hsia, W.K., and Chmielowiec, M. (1988) Derived moment-rotation curves for doubleframing angles, Comput & Struct, Elsevier Science Ltd., 3, pp.485-494.
- Ballio, G. and Mazzolani, F.M. (1994) Strutture in A cciaio. Hoepli, Milan.
- Kulak, G.L., Fisher, J.W., and Struik, J.H.A. (2001) Guide to design criteria for bolted and riveted joints, 2nd Ed., American Institute of Steel Construction, New York.
- Bursi, O. (1990) Behaviour of high strength bolts in bolted beam-to-column connections, Proceedings of Applied Stress Analysis Conference, Nottingham.
- Hantouche, E.G. (2011) Behavioral characterization of built-up T-stub connections for use in moment resisting frames, Ph.D. Dissertation, University of Cincinnati, Cincinnati, USA.
피인용 문헌
- Evaluation of the Initial Rotational Stiffness of a Double Split Tee Connection vol.26, pp.2, 2014, https://doi.org/10.7781/kjoss.2014.26.2.133
- 비보강 확장단부판 접합부에 체결된 고장력볼트의 지레작용력 및 축방향 인장강성에 대한 해석적 연구 vol.27, pp.2, 2013, https://doi.org/10.7781/kjoss.2015.27.2.251
- 반복하중을 받는 비보강 확장 단부판 접합부의 해석 및 실험적 연구 vol.28, pp.6, 2016, https://doi.org/10.7781/kjoss.2016.28.6.439
- 프리캐스트 콘크리트 벽체의 상하부에 C형강 보가 결합된 복합 패널의 개발 vol.29, pp.6, 2013, https://doi.org/10.7781/kjoss.2017.29.6.435
- An Experimental Study on the Structural Behavior of High Strength Long Bolt Tension Type Joints vol.32, pp.3, 2013, https://doi.org/10.7781/kjoss.2020.32.3.161