대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제37권7호
  • /
  • Pages.683-693
  • /
  • 2013
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

혼성 격자볼츠만 방법을 이용한 공동 형상 내부에서의 혼합 특성에 관한 수치적 연구

Numerical Investigation of Mixing Characteristics in a Cavity Flow by Using Hybrid Lattice Boltzmann Method

  • 투고 : 2013.01.18
  • 심사 : 2013.04.09
  • 발행 : 2013.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 혼성 격자볼츠만 방법(HLBM)을 이용하여 상판이 일정한 속도로 움직이는 공동 형상 내부에서의 혼합 특성에 대하여 수치적으로 연구하였다. 먼저, 공동 형상에서 기존의 신뢰성 있는 유동장 결과와의 비교를 통해 LB-SRT 모델과 LB-MRT 모델의 신뢰성을 검토하였다. 두 모델 모두 기존의 연구결과와 유사한 결과를 보였으나, LB-MRT 모델이 LB-SRT 모델보다 높은 Re수에서는 수치적 안정성이 높은 것을 확인하였다. 수치적 안정성이 좋은 LB-MRT 모델을 토대로 유한차분법을 적용한 HLBM을 이용하여 공동 형상 내부에서의 농도장을 수치 해석하였다. Re수와 Pe수를 변화하여 공동 형상 내부의 혼합 특성과 물질 전달 형태에 대하여 파악하였다.

In this study, the mixing characteristics in lid-driven cavity flows were studied numerically by using a hybrid lattice Boltzmann method (HLBM). First, we compared the numerical results from single-relaxation-time (LB-SRT) and multi-relaxation-time (LB-MRT) models to examine their reliability. In most of the cavity flow, the results from both the LB-SRT and the LB-MRT models were in good agreement with those using a Navier-Stokes solver for Re=100-5000. However, the LB-MRT model was superior to the LB-SRT model for the simulation of higher Reynolds number flows having a geometrical singularity with much lesser spatial oscillations. For this reason, the LB-MRT model was selected to study the mass transport in lid-driven cavity flows, and it was demonstrated that mass transport in the fluid was activated by a recirculation zone in the cavity, which is connected from the top to the bottom surfaces through two boundary layers. Various mixing characteristics such as the concentration profiles, mean Sherwood (Sh) numbers, and velocity were computed. Finally, the detailed transport mechanism and solutions for the concentration profile in the cavity were presented.

키워드

참고문헌

  1. Burggraf, O.R., 1966, "Analytical and Numerical Studies of the Structure of Steady Separated Flows," Journal of Fluid Mechanics, Vol. 24, pp. 113-151. https://doi.org/10.1017/S0022112066000545
  2. Pan, F., and Acrivos, A,, 1967, "Steady Flows in a Rectangular Cavities," Journal of Fluid Mechanics, Vol. 28, pp. 643-655. https://doi.org/10.1017/S002211206700237X
  3. Shankar, P.N., and Deshpande, M.D, 2000, "Fluid Mechanics in the Driven Cavity," Annual Review of Fluid Mechanics, Vol. 32, pp. 93-136. https://doi.org/10.1146/annurev.fluid.32.1.93
  4. Ghia, U., Ghia, K.N., and Shin, C.T., 1982, "High-Re Solutions for Incompressible Flow Using the Navier-Stokes Equations and a Multigrid Method," Journal of Computational Physics, Vol. 48, pp. 387-411. https://doi.org/10.1016/0021-9991(82)90058-4
  5. Nguyen, N.-T., and Wu, Z., 2005, "Micromixers - A Review," Journal of Micromechanics and Microengineering, Vol.15, pp. R1-R16. https://doi.org/10.1088/0960-1317/15/2/R01
  6. Alkire, R.C, Deligianni, H., and Ju, J.B, 1990, "Effect of Fluid Flow on Convective Transport In Small Cavities," Journal of the Electrochaemical Society, Vol. 137, pp. 818-824. https://doi.org/10.1149/1.2086562
  7. Occhialini, J.M. and Higdon, J.J.L, 1992, "Convective Mass Transport from Rectangular Cavities in Viscous Flow," Journal of the Electrochaemical Society, Vol. 139, pp. 2845-2855. https://doi.org/10.1149/1.2068991
  8. Trevelyan, P.M.J., Kalliadasis, S., Merkin, J.H., and Scott, S.K., 2001, "Circulation and Reaction Enhancement of Mass Transport in Cavity," Chemical Engineering Science, Vol. 56, pp. 5177-5188. https://doi.org/10.1016/S0009-2509(01)00179-8
  9. Shin, M.S., Byun, S.J., and Yoon, J.Y., 2010, "Numerical Investigation of Effect of Surface Roughness in a Microchannel," Trans. Korean Soc. Mech. Eng. B, Vol. 34, No. 5, pp. 539-546. https://doi.org/10.3795/KSME-B.2010.34.5.539
  10. Shin, M.S., Byun, S.J., Kim, J.H., and Yoon, J.Y., 2011, "Numerical Investigation of Pollutant Dispersion in a Turbulent Boundary Layer by Using Lattice Boltzmann-Subgrid Model," Trans. Korean Soc. Mech. Eng. B, Vol. 35, No. 2, pp. 169-178. https://doi.org/10.3795/KSME-B.2011.35.2.169
  11. Chen, S. and Doolen, G.D., 1998, "Lattice Boltzmann Method for Fluid Flows," Annual Review of Fluid Mechanics, Vol. 30, pp. 329-364. https://doi.org/10.1146/annurev.fluid.30.1.329
  12. McNamara, G., and Alder, B., 1993, "Analysis of the Lattice Boltzmann Treatment of Hydrodynamics," Physica A, Vol. 194, pp. 218-228. https://doi.org/10.1016/0378-4371(93)90356-9
  13. Shan, X., 1997, "Simulation of Rayleigh-Bénard Convection Using a Lattice Boltzmann Method," Physical Review E, Vol. 55, pp. 2780-2788. https://doi.org/10.1103/PhysRevE.55.2780
  14. Lallemand, P., and Luo, L.S., 2003, "Hybrid Finite-Difference Thermal Lattice Boltzmann Equation," International Journal of Modern Physics, Vol. 17, pp. 41-47. https://doi.org/10.1142/S0217979203017060
  15. Treeck, C.V., Rank, E., Krafczyk, M., Tolke, J., and Nachtwey, B., 2006, "Extension of a Hybrid Thermal LBE Scheme for Large-Eddy Simulations Of Turbulent Convective Flows," Computers & Fluids, Vol. 35, pp. 863-871. https://doi.org/10.1016/j.compfluid.2005.03.006
  16. Bhatnagar, P.L, Gross, E.P. and Krook, M., 1954, "A Model for Collision Processes in Gases. I : Small Amplitude Processes in Charged and Neutral One-Component System," Physical Review, Vol. 94, No. 5, pp. 511-525. https://doi.org/10.1103/PhysRev.94.511
  17. d'Humieres, D., 1992, "Generalized Lattice Boltzmann Equation," in Rarefied Gas Dynamics: Theory and Simulations, ed. by Shizgal, D, and Weaver, D.P, Progress in Astronautics and Aeronautics, Vol. 159, AIAA, Washington DC, pp. 450-458.
  18. Hou, S., Zou, Q., Chen, S., Doolen, G., and Cogley, A.C., 1995, "Simulation of Cavity Flow by Lattice Boltzmann Method," Journal of Computational Physics, Vol. 118, pp. 329-347. https://doi.org/10.1006/jcph.1995.1103
  19. Antonini, G., Gelus, M., Guiffant, G., and Zoulalian, A., 1981, "Simultaneous Momentum and Mass Transfer Characteristics in Surface-Driven Recirculating Flows," International Journal of Heat and Mass Transfer, Vol. 24, pp. 1313-1323. https://doi.org/10.1016/0017-9310(81)90182-4

피인용 문헌

  1. Grid Refinement Model in Lattice Boltzmann Method for Stream Function-Vorticity Formulations vol.39, pp.5, 2015, https://doi.org/10.3795/KSME-B.2015.39.5.415
  2. Numerical Investigation of Mixing Characteristics in Cavity Flow at Various Aspect Ratios vol.39, pp.1, 2015, https://doi.org/10.3795/KSME-B.2015.39.1.079