Journal of the Korea Institute of Building Construction (한국건축시공학회지)

The Korean Institute of Building Construction (한국건축시공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of the Performance of the PVA Fiber Reinforced Inorganic Binder and Industrial By-products Building Board

  • Park, Jong-Pil (Department of Architectural Engineering, Hanbat National University) ;
  • Lee, Sang-Soo (Department of Architectural Engineering, Hanbat National University) ;
  • Song, Ha-Young (Department of Architectural Engineering, Hanbat National University)
  • Received : 2012.11.26
  • Accepted : 2013.04.05
  • Published : 2013.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

The test on the mix of PVA fiber of low carbon inorganic composite as a cement substitute found it to be satisfactory in terms of flexibility and stiffness. The result of the evaluation of the properties of low carbon inorganic panel revealed that the absorptivity was low at 8 to 9%, which is lower than the KS value of 25%. Also, the test on non-combustibility and gas toxicity found that these factors satisfied the decision criteria. In the test on heavy metals discharges, Pb, Cd, Cr6+, Hg, and As were not detected. Regarding far-Infrared emissivity and formaldehyde emission, the substitute was found to be harmless to the human body. Therefore, if the issue of shrinkage, which is a disadvantage of inorganic composites, is addressed, it is judged that it is possible to develop a low carbon inorganic composite panel with better performance.

Keywords

References

  1. Lee JH. A Study on GHG emissions and mitigation potentials of the industrial sector in Korea [master's thesis]. [Daegu (Korea)]: University of Keimyung; 2010. 77 p.
  2. Lee SS. A study on the strength and flowing properties of cementless type eco-friendly inorganic composites by using alkali accelerator. Journal of the Architectural Institute of Korea. 2010 May;26(5):67-74
  3. Lee YS, Lee KP, Lee SS, Song HY. A study on the strength and flowing properties of the non-cement inorganic composite by using blast furnace slag and red mud. Proceeding of the Korea Institute of Building Construction Conference; Daejeon. Seoul (Korea): The Korea Institute of Building Construction; 2010. p. 91-4.
  4. Han CG, Lee GC, Heo YS. A comparison study between evaluation methods on the rheological properties of cement paste. Journal of the Korea Institute of Building Construction. 2006 Sep;21(3):75-82
  5. Jeong SW, Lim NG. Study of non sintered cement mortar using nanoslag and alkali activator. Journal of the Korea Institute of Building Construction. 2010 Dec;44(6):61-6
  6. Sim JI, Yang KH. Practical Application of GGBS-Based Alkali-Activated Binder to Secondary Products of Concrete. Journal of the Korea Institute of Building Construction. 2010 Oct;43(5):37-44
  7. Yoo JW, Lee JS, Park BK, Pei CC, Han MC, Han CG. Improvement of early age concrete strength using blast furnace slag power. Proceeding of the Korea Institute of Building Construction Conference; 2009 May 23; Seoul. Seoul (Korea): The Korea Institute of Building Construction; 2009. p. 77-80.
  8. Kim TC, Kim J, Yeon KW, Yoon GW, Shin DA. Field application of the color concrete panel with red mud and pigment. Proceeding of the Korea Institute of Building Construction Conference; 2009 Nov. 13; Cheongju. Seoul(Korea): The Korea Institute of Building Construction; 2009. p. 19-22.
  9. Jeong DY, Choi GR, Kim MH, Hong JH. An experimental study on development of eco-friendly color concrete using industrial waste red mud. Journal of the Environmental Sciences. 2007 July;16(8):929-39. https://doi.org/10.5322/JES.2007.16.8.929
  10. Heo JW, Lim NK. The basic study for the proposal standard of Nano-Slag on an alternation material for Silica-fume. Proceeding of the Korea Concrete Institute; 2008 Nov. 7; Goyang. Seoul(Korea): The Korea Concrete Institute; 2008. p. 67-71.