Effect of Cutting off Processing SCM415 on Surface Roughness and Thickness of Materials

SCM415의 절단가공이 표면조도와 재료 두께에 미치는 영향

  • Kim, Jin-Su (Computer Aided Mechanics Department of Changwon Campus Korea Polytechic) ;
  • Kang, Seong-Ki (Computer Aided Mechanics Designe Department of Changwon Campus Korea Polytechic) ;
  • Shin, Mi-Jung (R&D Center of Sungsanamdeco Co., Ltd.)
  • Published : 2013.04.30

Abstract

This study focused on how it affects the surface roughness of work piece in cutting SCM415 steel, widely used steel in industry, by TiCN and TiN tools. Following conclusion was drawn from several experiments. The surface roughness of heat treated workpiece was better than that of non heat-treated materials. Moreover, the roughness of surface roughness(Ra 0.25) on feeding rate of 0.05 was better when it was in wet process, rather than dry process. As the feeding rate increases, TiCN coating tool shows better roughness of surface than TiN tool. Also, in heated treatment, TiCN coating tool shows the least straightness dimension deviation at feeding rate of 0.05, 0.15mm/rev, and concave-like R shape appears by the feeding rate orders of 0.05, 0.15, 0.1, 0.125 and 0.075mm/rev.

Keywords

References

  1. Petropoules, P., "The Effect of Feed rate and Tool Nose Radius on Roughness of Obilique Finish Turned surface", Wear, Vol. 23, No. 3, pp. 299-310, 1973. https://doi.org/10.1016/0043-1648(73)90019-7
  2. Cassier, Z., and Prato, Y., "Patricia Munoz- Escalona Built-up edge effect on tool wear when turning steels at low cutting speed", Journal of Materials Engineering and Performance-J MATER ENG PERFORM, Vol. 13, No. 5, pp. 542-547, 2004. https://doi.org/10.1361/10599490420629
  3. Ramaswami, R., "The Effct of the Built-up Edge on the Wear of Cutting Tools", Wear, Vol. 18, No. 1, pp. 1-10, 1971. https://doi.org/10.1016/0043-1648(71)90059-7
  4. Ezugwu, E. O., and Okeke, C. I., "Tool life and wear mechanisms of TiN coated tools in an intermittent cutting operation", Journal of Materials Processing Technology-J MATER PROCESS TECHNOL, Vol. 116, No. 1, pp. 10-15, 2001. https://doi.org/10.1016/S0924-0136(01)00852-4
  5. Ryu, B. H., "A Study on the Coated Characteristics of Ceramic Tools", Korean Society of Manufacturing Technology Engineers, Vol. 9, No. 1, pp. 96-101, 2000.
  6. Kwon, D. K., Wang, D. H., Jeon, Y. L., Kim, W. I., and Kang, T. U., "A Study on the Relation between Surface Roughness and Cutting Fluids", Proceedings of the KSMPE Conference, pp. 161-162, 2011.
  7. Lee, K. J., "Effect of Input Force on Gripping Force and Lifting Length", A Thesis for a Mechanical Engineering, Incheon University, Republic of Korea, 2008.