참고문헌
- Moore Nanotechnology Systems, http://www.nanotechsys.com
- Hewlett Packard Co., "Laser Measurement System User's Guide, Manual Part No. 00528-90010," 1984.
- Evans, C. J., Hocken, R. J., and Estler, W. T., "Self-Calibration: Reversal, Redundancy, Error Separation and 'Absolute Testing'," Annals of the CIRP, Vol. 45, No. 2, pp. 617-634, 1996. https://doi.org/10.1016/S0007-8506(07)60515-0
- Tanaka, H., Tozawa, K., Sato, H., O-hori, M., and Sekiguchi, H., "Application of a New Straightness Measurement Method to Large Machine Tool," Annals of the CIRP, Vol. 30, No. 1, pp. 455-459, 1981. https://doi.org/10.1016/S0007-8506(07)60977-9
- Tozawa, K., Sato, H., and O-hori, M, "New Method for the Measurement of the Straightness of Machine Tools and Machined Work," ASME J. of Mechanical Design, Vol. 104, No. 3, pp. 587-592, 1982. https://doi.org/10.1115/1.3256390
- Gao, W. and Kiyono, S., "High Accuracy Profile Measurement of a Machined Surface by the Combined Method," Measurement, Vol. 19, No. 1, pp. 55-64, 1996. https://doi.org/10.1016/S0263-2241(96)00066-8
- Tanaka H., Sato, H., "Extensive Analysis and Development of Straightness Measurement by Sequential-Two-Points Method," Trans. ASME J. of Eng. for Ind., Vol. 108, pp. 176-182, 1986. https://doi.org/10.1115/1.3187061
- Gao, W. and Kiyono, S., "On-Machine Profile Measurement of Machined Surface Using the Combined Three-Point Method," JSME Int. J. Series C, Vol. 40, No. 2, pp. 253-259, 1997. https://doi.org/10.1299/jsmec.40.253
- Gao, W., Yokoyama, J., Kojima, H., and Kiyono, S., "Precision Measurement of Cylinder Straightness Using a Scanning Multi-Probe System," Precision Engineering, Vol. 26, No. 3, pp. 279-288, 2002. https://doi.org/10.1016/S0141-6359(02)00106-X
- Fung, E. H. K., and Yang, S. M., "An Approach to On-Machine Motion Error Measurement of a Linear Slide," Measurement, Vol. 29, No. 1, pp. 51-62, 2001. https://doi.org/10.1016/S0263-2241(00)00027-0
- Oh, Y. J., Park, C. H., Hwang, J. H., and Lee, D. W., "Measurement of Five DOF Motion Errors in the Ultra Precision Feed Tables," J. Korean Soc. Precis. Eng., Vol. 22, No. 11, pp. 135-141, 2005.
- Park, C. H., Oh, Y. J., Shamoto, E., and Lee, D. W., "Compensation of Five DOF Motion Errors of Hydrostatic Feed Table by Utilizing Actively Controlled Capillaries," Precision Engineering, Vol. 30, No. 3, pp. 299-305, 2006. https://doi.org/10.1016/j.precisioneng.2005.10.002
- Oh, J. S., Khim, G., Oh, J. S., and Park, C. H., "Precision Measurement of Rail Form Error in a Closed Type Hydrostatic Guideway," Int. J. Precis. Eng. Manuf., Vol. 13, No. 10, pp. 1853-1859, 2012. https://doi.org/10.1007/s12541-012-0243-8
- Hicks, T. R. and Atherton, P. D., "The NanoPositioning Book," Queensgate Instruments, pp. 59-62, 1997.
- Optodyne, Inc., http://www.optodyne.com/opnew5/TecArt/ tech29.pdf
- Oh, J. S., Khim, G., Park, C. H., Chung, S. J., Lee, S. K., and Kim, S. J., "Accuracy Simulation of the Precision Linear Motion Systems," J. Korean Soc. Precis. Eng., Vol. 28, No. 3, pp. 275-284, 2011.
피인용 문헌
- Current Status and Technical Issues of Ultra-precision Machine Tools vol.31, pp.3, 2014, https://doi.org/10.7736/KSPE.2014.31.3.189
- Compensation of Sensor Gain Difference in Measuring Straightness Errors Using a Mixed Sequential Two-Probe Method pp.2005-4602, 2019, https://doi.org/10.1007/s12541-019-00063-7