KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Comparative Study on the Bond Strength between Direct Tensile Test and Indirect Tensile Test for Bonded Concrete Overlay

직접인장 및 간접인장 실험방법에 따른 접착식 콘크리트 덧씌우기의 부착강도 비교 고찰

  • 김영규 (강릉원주대학교 토목공학과) ;
  • 이승우 (강릉원주대학교 토목공학과)
  • Received : 2013.02.12
  • Accepted : 2013.03.15
  • Published : 2013.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

Bonded concrete overlay is a favorable maintenance method since the material properties are similar to existing concrete pavements. In addition, bonded concrete overlay has advantage of structural performance based on being bonded together, both for the overlay layer and the existing pavement which perform as one monolithic layer. Therefore, it is important to have a suitable bond strength criteria for long term performance of bonded concrete overlay. This study aimed to investigate the affecting of bond strength on various bond characteristics, and to compare the bond strength between direct tensile test and indirect tensile test due to various conditions such as overlay materials, compressive and flexure strength of existing pavement, and deterioration status of existing pavement. As a result of this study, bond strength occurred by both of direct and indirect tensile test due to monotonic load is highly correlated such as coefficient of determination of 0.75 and P-value of 0.002. However, bond strength by indirect tensile test was relatively higher than bond strength by direct tensile test. It was known that correlation between direct and indirect tensile test was possible to use the characteristics analysis of bond fatigue behavior based on bond strength due to cyclic load which can simulate real field behavior of bonded concrete overlay.

접착식 콘크리트 덧씌우기는 기존 콘크리트 포장과의 재료물성이 유사하여 적절한 유지보수 공법으로 제시되고 있으며, 덧씌우기층과 기존 포장층이 완전부착을 통한 일체화 거동을 하여 우수한 구조적 성능을 확보할 수 있다. 따라서 접착식 콘크리트 덧씌우기의 장기 공용성을 위하여 적절한 부착강도 기준을 확보하는 것이 매우 중요하다. 본 연구에서는 다양한 부착 특성이 부착강도에 미치는 영향을 고찰하고자 하였으며, 덧씌우기 재료, 기존 포장의 압축강도 및 휨강도 변화, 기존 포장의 열화상태 등 다양한 부착조건에 대한 직접인장 및 간접인장 실험을 실시하여 도출되는 부착강도를 비교 분석하고자 하였다. 연구 결과, 직접인장실험에 의한 부착강도가 간접인장실험에 의한 부착강도보다 상대적으로 높게 분포하는 경향을 나타내고 있으나, 결정계수 0.75 및 P-value 0.002의 높은 부착강도 상관관계를 확보하였다. 이를 통하여 접착식 콘크리트 덧씌우기의 실제 현장 거동을 모사할 수 있는 반복하중에 의한 부착 피로 특성 분석 시 직접인장 및 간접인장 실험의 상관관계를 활용할 수 있을 것으로 판단된다.

Keywords

References

  1. American Concrete Pavement Association (2008). "Guide to concrete overlays: Sustainable Solutions for Resurfacing and Rehabilitating Existing Pavements." Second Edition, ACPA Pub lication TB021.02P.
  2. American Society for Testing and Materials (1996). Standard test method for splitting tensile strength of cylindrical concrete specimens, ASTM C 496.
  3. David A. Lange., and Hak-Chul Shin. (2001). Early age stresses and debonding in bonded concrete overlays, Transportation Research Record (1778). Paper No. 01-0410, pp.174-181.
  4. Expressway and Transportation Research Institute (1997). Pavement rehabilitation by concrete overlay (III), Korean Expressway Corporation (in Korean).
  5. Granju J. L. (2001). "Debonding of thin cement-based overlays." Journal of Materials in Civil Engineering, Vol. 13, No. 2, pp. 114-120. https://doi.org/10.1061/(ASCE)0899-1561(2001)13:2(114)
  6. Huang, Y. H. (2003). Pavement analysis and design, Second Edition. Prentice Hall, NJ.
  7. Jung, J. D., Ryu, S. W., Han, S. H., Cho, Y. H. (2006). "The performance analysis of diamond grinding for existing concrete pavement." Journal of Korean Society of Road Engineers, KSRE, Seoul, Korea, Vol. 8, No. 3, pp.77-88 (in Korean).
  8. Smith, K. D., Yu, H. T., and Peshkin, D. G. (2002). Portland cement concrete overlays: State of the Technology Synthesis, Publication No. FHWA-IF-02-045, Federal Highway Administration.
  9. Korean Expressway Corporation (2009). "Highway construction guide specification" (in Korean).
  10. Lee, S. W., and Son, H. J. (2011). "A study on the factors affecting on the life of bonded concrete overlay pavement using the LTPP data of U.S.A." Journal of Korean Society of Civil Engineers, KSCE, Seoul, Korea, Vol. 31, No. 4, pp. 555-564 (in Korean).
  11. Lee, S. W., Kim, Y. K., and Lee, P. H. (2011). "A Study on the application of very rapid hardening acrylic polymer modified concrete for bonded concrete overlay method." Journal of Korean Society of Road Engineers, KSRE, Seoul, Korea, Vol. 13, No. 1, pp. 139-148 (in Korean).
  12. Lee, S. W., Kim, Y. K., and Han, S. H. (2012). "A Study on the bond-behavior of bonded concrete overlays." International Journal of Highway Engineering, KSRE, Seoul, Korea, Vol. 14, No. 5, pp. 31-45 (in Korean). https://doi.org/10.7855/IJHE.2012.14.5.031
  13. Lee, S. W., Kim, Y. K., Yoo, T. S., and Han, S. H. (2012). "Analysis of service life and possible causes of early distress for bonded concrete overlays." International Pavement Engineering Conference 2012, Busan, Korea, pp. 105-119.
  14. M. A. Issa, R. Z. Al-Rousan. (2008). "High performance bonded concrete overlays." International Conference on Construction and Building Technology, ICCBT2008-(01), pp. 1-20.
  15. Medina-Chavez, C. I., Choi, S. C., and Won, M. (2007). Concrete pavement overlays and failure mechanisms, Report No. 0-4893-2, Certer for Transportation Research.
  16. Peter M. Semen, Raymond S. Rollings (2005). "A Review and discussion of current developments involving bonded concrete overlays of airfield pavements." International Conference on Concrete Pavements, Colorado, USA, pp. 900-910.
  17. Sprinkel, M. M. and Ozyildirim, C. (2000). "Evaluation of hydraulic cement concrete overlays placed on three pavements in Virginia," VTRC 01-R2, Virginia Department of Transportation.

Cited by

  1. Bond-Fatigue Behavior of Bonded Concrete Overlay vol.44, pp.4, 2016, https://doi.org/10.1520/JTE20140331
  2. Application of In-Situ Mixing Hydration Accelerator on Polymer Modified Concrete for Bonded Concrete Overlay vol.17, pp.3, 2015, https://doi.org/10.7855/IJHE.2015.17.3.085
  3. Characteristics of Moduli Decay for the Asphalt Mixture under Different Loading Conditions vol.8, pp.5, 2018, https://doi.org/10.3390/app8050840