DOI QR코드

DOI QR Code

Numerical Study of Surface Heat Transfer Effects of Multiple Fan-Shaped Small-Scale Fins

다중 미세 날개구조의 표면 열전달에 미치는 영향분석

  • Park, Ki-Hong (Basic Technology Research Center, LG Electronics) ;
  • Park, Sang Hu (School of Mechanical Engineering & ERC/NSDM, Pusan Nat'l Univ.) ;
  • Lee, Ju-Chul (Div. of Precision Engineering, Graduate School of Mechanical Engineering, Pusan Nat'l Univ.) ;
  • Min, June-Kee (PNU and Rolls-Royce University Technology Centre) ;
  • Ha, Man-Yeong (Basic Technology Research Center, LG Electronics)
  • 박기홍 (LG 전자 공통기술연구실) ;
  • 박상후 (부산대학교 기계공학부/정밀정형 및 금형가공연구센터) ;
  • 이주철 (부산대학교 기계공학부대학원 정밀가공시스템 전공) ;
  • 민준기 (부산대-롤스로이스 대학연구센터) ;
  • 하만영 (LG 전자 공통기술연구실)
  • Received : 2012.12.23
  • Accepted : 2013.02.12
  • Published : 2013.05.01

Abstract

In this work, we study a heat transfer enhancement technology using fan-shaped small-scale fins. Fins having a thickness of 10 ${\mu}m$ move up-down by a pulsating flow. Owing to these motions, the heat transfer on a surface increases dramatically. The two-way FSI (fluid-structure interaction) method was applied for the analysis, and the analysis model was evaluated using a single fin model by comparing the experimental results. In summary, a maximum 40% increase in heat transfer capacity using a single and multiple small-scale fins was obtained in comparison with the results obtained without using fins. From this work, we believe that the proposed method can be a promising method for heat transfer enhancement in real applications.

전자제품과 같이 소형화 추세에 있는 제품에 대하여 열전달 촉진을 시키는 방법에 대하여 연구하였다. 두께 10 ${\mu}m$ 를 가지는 미세 날개구조를 이용하여 상하진동 운동을 유도하고 열전달 특성에 대하여 분석하였다. 본 연구에서는 양방향 유체-고체 연성해석 (Two-way FSI)를 이용하여 미세 날개의 거동을 분석하였으며, 단일 날개구조를 제작하여 해석모델을 검증하였다. 단일 및 다중 미세 날개구조에 의한 열전달 향상이 날개가 없는 경우와 비교해 볼 때 최대 40% 정도 향상됨을 알 수 있으며, 본 연구에서 제안된 방법에 의하여 향후 실제적인 열전달 촉진기술에 충분히 활용될 수 있을 것으로 사료된다.

Keywords

References

  1. Chu, R. C., 1986, "Heat Transfer in Electronic Systems," In: Proceedings of the 8th International Conference on Heat Transfer, New York, pp. 293-305.
  2. Go, J. S., Lim, G. B., Yun, H. Y., Lee, J. H., Song, I. S. and Park, Y. E., 2001, "Heat Transfer Enhancement Using Flow-Induced Vibration of a Microfin Array," Sensors Actuators A : Physical, Vol. 90, No. 3, pp. 232-239. https://doi.org/10.1016/S0924-4247(01)00522-2
  3. Shin, S.-W., Chung, I.-K. and Kim, S.-Y., 2009, "Local Heat Transfer Characteristics on Fin Surface of Plate Fin-Oval Tube with Delta Wing Vortex Generators," Trans. Korean Soc. Mech. Eng. B, Vol. 33, No. 10, pp. 757-766. https://doi.org/10.3795/KSME-B.2009.33.10.757
  4. Lee, J. K., Kim, Jung, C. W. and Kang, Y. T., 2008, "Experiment on Heat Transfer and Absorption Performance Enhancement for Binary Nanofluids ($NH_{3}/H_{2}O$+Nano Particles)," Trans. Korean Soc. Mech. Eng. B, Vol. 32, No. 9, pp. 669-675. https://doi.org/10.3795/KSME-B.2008.32.9.669
  5. Ralph, L. and Webb, J., 1994, "Principles of Enhanced Heat Transfer," Int. J. Heat and Fluid Flow, Vol. 15, No. 4, pp. 341.
  6. Keil, R. H. and Baird, H. I., 1971, "Enhancement of Heat Transfer by Flow Pulsation," Ind. Eng. Chem. Process Des. Develop., Vo. 10, No. 4, pp. 473-478. https://doi.org/10.1021/i260040a008
  7. Yoo, S.-Y., Cho, W.-S. and Ahn, J.-K., "A Study on Heat Transfer Enhancement from Flat Plate using Multiple Tripping Wires," 2012, Koran J. Air- Conditioning and Ref. Eng., Vol. 24, No. 12, pp. 837-845. https://doi.org/10.6110/KJACR.2012.24.12.837
  8. Kim, S. Y., Kang, B. H. and Hyun, J. M., 1998, "Forced Convection Heat Transfer from Two Heated Blocks in Pulsating Channel Flow," Int. J. Heat Mass Transfer, Vol. 41, pp. 625-634. https://doi.org/10.1016/S0017-9310(97)00138-5
  9. Bathe, K. J. and Zhang, H., 2004, "Finite Element Developments for General Fluid Flows with Structural Interactions," Int. J. Num. Meth. Eng., Vol. 60, No. 3, pp. 213-232. https://doi.org/10.1002/nme.959
  10. Hirt, C. W., Amsden, A. A. and Cook, J. L., 1974, "An Arbitrary Lagrangian-Eulerian Computing Method for All Flow Speeds," J. Comput. Phys., Vol. 14, pp. 227-253. https://doi.org/10.1016/0021-9991(74)90051-5