CMP 공정에서 연마패드 경도에 따른 연마 특성 변화 분자동력학 연구

Molecular Dynamics Study on Property Change of CMP Process by Pad Hardness

  • 권오근 (세명대학교 전자공학과) ;
  • 최태호 (상명대학교 컴퓨터정보통신공학과) ;
  • 이준하 (상명대학교 컴퓨터시스템공학과)
  • Kwon, Oh Kuen (Department of Electronic Engineering, Semyung University) ;
  • Choi, Tae Ho (Department of Computer Information Telecommunication Engineering, Sangmyung University) ;
  • Lee, Jun Ha (Department of Computer System Engineering, Sangmyung University)
  • 투고 : 2013.03.04
  • 심사 : 2013.03.18
  • 발행 : 2013.03.31

초록

We investigated the wearable dynamics of diamond spherical abrasive during the substrate surface polishing under the pad compression via classical molecular dynamics modeling. We performed three-dimensional molecular dynamics simulations using the Morse potential functions for the copper substrate and the Tersoff potential function for the diamond abrasive. The pad hardness had a big impact on the wearable dynamics of the abrasive. The moving speed of the abrasive decreased with increasing hardness of the pad. As the hardness decreased, the abrasive was indented into the pad and then the sliding motion of the abrasive was increased. So the pad hardness was greatly influenced on the slide-to-roll ratio as well as the wearable rate.

키워드

참고문헌

  1. R. K. Singh and R. Bajaj, "Advances in chemical mechanical planarization", MRS Bulletin, Vol. 27, No. 10, pp. 743, 2002. https://doi.org/10.1557/mrs2002.244
  2. R. K. Singh, S.-M. Lee, K.-S. Choi, G. B. Basim, W. Choi, Z. Chen, and B. M. Moudgil, "Fundamentals of slurry design for CMP of metal and dielectric materials", MRS Bulletin, Vol. 27, No. 10, pp. 752, 2002. https://doi.org/10.1557/mrs2002.245
  3. R. Bajaj, A. Zutshi, R. Surana, M. Naik, and T. Pan, "Integration challengers for CMP of copper", MRS Bulletin, Vol. 27, No. 10, pp. 776, 2002. https://doi.org/10.1557/mrs2002.249
  4. D. Evans, "The future of CMP", MRS Bulletin, Vol. 27, No. 10, pp. 779, 2002. https://doi.org/10.1557/mrs2002.250
  5. K. J. Lee, S. Y. Kim and Y. J. Seo, "Optimization of CMP Process Parameter using Semi-empirical DOE (Design of Experiment) Technique", Journal of KIEEME, Vol. 15, No. 11, , pp. 932, 2002.
  6. C. B. Kim, S. Y. Kim and Y. J. Seo, "Semiconductor : Oxide Planarization of Trench Structure using Chemical Mechanical Polishing ( CMP )", Journal of KIEEME, Vol. 15, No. 10, pp. 832, 2002.
  7. C. J. Park, S. Y. Kim and Y. J. Seo, "Effects of Diluted Silica Slurry and Abresives on the CMP Characteristics", Journal of KIEEME, Vol. 15, No. 10, pp. 844, 2002.
  8. F. Preston, "The theory and design of plate glass polishing machines", J. Soc. Glass Technol., Vol. 11, pp. 214, 1927.
  9. W. T. Tseng and Y. L. Wang, "Re-examination of pressure and speed dependence of removal rate during chemical mechanical polishing processes", J. Electrochem. Soc., Vol. 144, pp. L15, 1997. https://doi.org/10.1149/1.1837417
  10. F. G. Shi and B. Zhao, "Modeling of chemicalmechanical polishing with soft pads", Appl. Phys. A, Vol. 67, No. 2, pp. 249, 1998. https://doi.org/10.1007/s003390050766
  11. J. W. Kang and J. H. Lee, "Multi-Walled Carbon Nanotube Oscillator Behavior Analysis using Classical Molecular Dynamics Simulation," J. of the Korean Physical Society, Vol. 53, No.2, pp.646-651, 2008 https://doi.org/10.3938/jkps.53.646
  12. M. P. Allen and D. J. Tildesley, "Computer Simulation of Liquids", Oxford, Clarendon, pp. 71, 1987.
  13. J. P. Ryckaert, G. Ciccotti and H. J. Berendsen, "Numerical integration of the cartesian equations of motion of a system with constraints:molecular dynamics of n-alkanes," J. of Computational Physics, pp. 327-341, 1977