• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.1-8
• /
• 2013

Surface permanent magnet-type vernier motors with three magnet array-type rotors (parallel magnetized type, repulsion type, and Halbach type) are compared based on the pull-out torque. It was clarified that increasing the rotor radius increases the pull-out torque at a fixed three-phase alternating voltage. The mechanism for the pull-out torque increase on each magnet array type was different, when the effects of the increase were analyzed based on an induced electromotive force and a synchronous reactance. As a result, the design of the Halbach-type rotor was found to be especially effective for achieving high pull-out torque, because this array type achieves a large induced electromotive force $E_0$ and a small synchronous reactance $x_s$.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.297-301
• /
• 2013

Flux-reversal machine (FRM) is cost effective and suitable for mass production due to its simple structure. However, there is a notable permanent magnet flux leakage which deteriorates the performance. To compensate this drawback with a design method, an Inset-Permanent-Magnet-Type FRM (ITFRM) has been proposed. The ITFRM has permanent magnets perpendicular to the stator teeth surface, and thus, is much more difficult to demagnetize. In this paper, we deal with the iron losses and irreversible permanent magnet demagnetization characteristics of the ITFRM according to various design variables and driving conditions. To analyze the characteristics, a two-dimensional finite-element method (2D-FEM) considering nonlinear analysis of permanent magnets is used. As a result, we propose the design variables that have the largest effects on the iron losses and irreversible magnet demagnetization.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.127-133
• /
• 2013

In this paper, the authors designed a surface permanent magnet (SPM)-type vernier motor whose maximum output is more than 5.2 kW, whose power factor at 4 kW is more than 90%, and whose efficiency at 4 kW is 85% under the conditions that the operating voltage, frequency, and synchronous speed are 400 V, 50 Hz, and 100 min-1, respectively.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1571-1576
• /
• 2007

This report describes the analytical characteristic of sinewave air gap flux density for the brushless AC motor with surface permanent magnet. The analysis of sinewave air gap flux density is the key to expect the performance of back EMF for the design of brushless AC motor. The numerical analysis and FEM analysis are performed to adopt radial and parallel flux magnetization of magnet on the rotor. And it is also executed to vary the magnet arc angle and arc radius for the condition of constant and non constant air gap. This report is focused on the characteristic of sinewave air gap flux density for permanent magnet of surface brushless AC motor. This results also have more reliable data against the previous paper which had the representative numerical analysis of air gap flux density[1][2].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.123-125
• /
• 2005

The purpose of this paper is to optimize rotor shape of interior permanent magnet (IPM) motor for high torque. V-shaped permanent magnet arrangement is applied to obtain more torque than prototype IPM. The performance, based on finite element method, is evaluated as torque per rotor volume (TRV). In this paper, response surface methodology (RSM) is used to search optimal shape of the rotor. The usefulness of RSM in optimal design of IPM motor is verified by comparing TRV between prototype and optimized V-type.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.64-66
• /
• 2004

Several techniques have been adopted in motor design of interior permanent magnet (IPM) type brushless DC (BLDC) motor to minimize cogging torque. IPM type motor has better ability in the centralization of flux than surface-mounted permanent magnet (SPM) type BLDC motor. So, the structure of IPM type BLDC motor has high saliency ratios that produce additional torque. However, this structure has a significant cogging torque that generates both vibration and noise. This paper describes new technique of the flux barriers design for reduction of cogging torque of IPM type BLDC motor. To reduce the cogging torque, flux barriers are applied in the rotor. Changing the number of barrier, the cogging torque is analyzed by finite clement method(FEM).

• 한국인터넷방송통신학회논문지
• /
• 제21권3호
• /
• pp.137-142
• /
• 2021

최근에는 회전자에 희토류 영구자석을 삽입하여 높은 효율과 출력밀도를 얻을 수 있는 매입형 영구자석 (IPM: Interior Permanent Magnet) 전동기 또는 표면부착형 영구자석 (SPM : Surface Permanent Magnet) 전동기처럼 영구자석이 사용된 전동기의 연구가 활발히 이루어지고 있다. 영구자석을 사용하기 때문에 릴럭턴스 전동기나 유도전동기와 비교해 효율이 높고 출력밀도가 높은 장점이 있으나 회전자에 영구자석을 삽입함으로써 고속운전 및 영구자석의 감자로 인한 신뢰성 감소, 희토류 금속의 원가 상승 등이 문제시되고 있다. 본 논문에서는 희토류 영구자석 전동기를 대체할 수 있는 미래기술 개발과, 희토류 저감형 전동기와 탈 희토류 전동기의 기술 선점을 요구하는 시대적 이슈(Issue)에 맞춰 영구자석이 필요 없는 스위치드 릴럭턴스 전동기 (Switched Reluvtance Motor, SRM)를 구동시키기 위한 구동 제어에 연구하고자 한다. PSIM 시뮬레이션 프로그램에서 제공하는 3상 SRM library를 이용하여 회전자 위치 정보 센서를 이용한 SRM의 구동 및 제어 시스템 모델링 (Modeling)을 연구하고자 한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.398-402
• /
• 2014

This paper presents the comparison study of permanent magnet (PM) eddy current of concentrated winding type surface permanent magnet synchronous motor (SPMSM) with different rare-earth magnet shapes. The fractional slot winding having 10 poles and 12 slots is studied. The PM eddy current is analyzed to compare for each shape by 2 dimensional (2D) finite element analysis (FEA). The eddy current and their loss of particular position of PM as well as their distributions are displayed for each model. The effect of partly enlarged air-gap made by PM shape to PM eddy current is compared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.77-79
• /
• 2004

This paper presents a design and characteristics analysis of interior permanent magnet (IPM) type BLDC motor for electric vehicle. In order to design of IPM type BLDC motor, surface mounted permanent magnet(SPM) type BLDC motor is used as the initial design model. According to the size of permanent magnet, the steady state characteristics is analysized by equivalent magnetic circuit method. The characteristics analysis results of the designed motor is compared with the experimental results.

• Journal of Power Electronics
• /
• 제2권3호
• /
• pp.220-229
• /
• 2002

In this paper, maximum efficiency operation of two types of permanent magnet synchronous motor drives, namely; surface type permanent magnet synchronous machine (SPMSM) and interior type permanent magnet synchronous motor(IPMSM), are investigated. The efficiency of both drives is maximized by minimizing copper and iron losses. Loss minimization is implemented using flux weakening. A neural network controller (NNC) is designed for each drive, to achieve loss minimization at difffrent speeds and load torque values. Data for training the NNC are obtained through off-line simulations of SPMSM and IPMSM at difffrent operating conditions. Accuracy and fast response of each NNC is proved by applying sudden changes in speed and load and tracking the UC output. The drives'efHciency obtained by flux weakening is compared with the efficiency obtained when setting the d-axis current component to zero, while varying the angle of advance "$\vartheta$" of the PWM inverter supplying the PMSM drive. Equal efficiencies are obtained at diffErent values of $\vartheta$, derived to be function of speed and load torque. A NN is also designed, and trained to vary $\vartheta$ following the derived control law. The accuracy and fast response of the NN controller is also proved.so proved.