References
- Rodrigues PCM, Pereloma EV, Santos DB: Mechanical properties of an HSLA bainitic steel subjected to controlled rolling with accelerated cooling. Mater. Sci. & Eng. A, 283 (2000), 136-143 https://doi.org/10.1016/S0921-5093(99)00795-9
- Kong J, Xie C: Effect of molybdenum on continuous cooling bainite transformation of low-carbon microalloyed steel. Mater. Des., 27 (2006), 1169-1173 https://doi.org/10.1016/j.matdes.2005.02.006
- Show BK, Veerababu R, Balamuralikrishnan R, Malakondaiah G: Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steel. Mater. Sci. & Eng. A, 527 (2010), 1595-1604 https://doi.org/10.1016/j.msea.2009.10.049
- Kim S, Moon J, Lee Y, Jeong H, Lee C: Prediction model for the microstructure and properties in weld heat affected zone: V. Prediction model for the phase transformation considering the in fluence of prior austenite grain size and cooling rate in weld HAZ of low alloyed steel. Journal of KWJS, 28-3 (2010), 104-113 (in Korean) https://doi.org/10.5781/KWJS.2010.28.3.104
- Lee Y, Moon J, Kim S, Lee C: Correlation between M-A constituents and tensile properties in the intercritical coarse grained HAZ of an ultra low carbon steel. Journal of KWJS, 28-3 (2010), 9-103 (in Korean) https://doi.org/10.5781/KWJS.2010.28.3.099
- Mohandas T, Madhusudan Reddy G, Satish Kumar B: Heat-affected zone softening in high-strength lowalloy steels. J. Mater. Process. Technol., 88 (1999), 284-294 https://doi.org/10.1016/S0924-0136(98)00404-X
- Li Y, Crowther DN, Green MJW, Mitchell PS, Baker TN: The effect of vanadium and niobium on the properties and microstructure of the intercritically reheated coarse grained heat affected zone in low carbon microalloyed steels. ISIJ Int., 41 (2001), 46-55 https://doi.org/10.2355/isijinternational.41.46
- Easterling K: Introduction to the physical metallurgy of welding (1st Edition), 1983; 33-35
- Moon J, Lee C: Behavior of (Ti,Nb)(C,N) complex particle during Thermo-mechanical cycling in the weld CGHAZ of a microalloyed steel. Acta Mater., 57 (2009), 2311-2320 https://doi.org/10.1016/j.actamat.2009.01.042
- Denis S, Archambault P, Gautier E, Simon A, Beck G: Prediction of residual stress and distorsion of ferrous and non-ferrous metals: Current status and future developments. J. Mater. Eng. Performance, 11 (2002), 92-102 https://doi.org/10.1007/s11665-002-0014-2
- Easterling K: Introduction to the physical metallurgy of welding (1st Edition), 1983; 23-24
- Moon J, Kim S, Lee C: Effect of thermo-mechanical cycling on the microstructure and strength of lath martensite in the weld CGHAZ of HSLA steel. Mater. Sci. & Eng. A, 528 (2011), 7658-7662 https://doi.org/10.1016/j.msea.2011.06.067
- Dutta B, Palmiere EJ, Sellars CM: Modelling the kinetics of strain induced predipitation in Nb microalloyed steels. Acta Mater., 49 (2001), 785-794 https://doi.org/10.1016/S1359-6454(00)00389-X
- Porter DA, Easterling KE: Phase transformation in metals and alloys (2nd Edition), 2001; 406, 415- 416
- Russell KC: Nucleation in solids: the induction and steady state effects. Adv. Colloid Interface Sci., 13 (1980), 205-318 https://doi.org/10.1016/0001-8686(80)80003-0
- Moon J, Kim S, Jang J.-I, Lee J, Lee C: Orowan strengthening effect on the nanohardness of the ferrite matrix in microalloyed steels. Mater. Sci. & Eng. A, 487 (2008), 552-557 https://doi.org/10.1016/j.msea.2007.10.046