References
- Ding, J. N. and Meng, Y.G., 2000, "Specimen Size Effect on Mechanical Properties of Polysilicon Microcantilever Beams Measured by Deflection Using a Nanoindenter," Mater. Sci. Eng., B83, pp. 42-47
- Fleck, N. A., Muller, G. M., Ashby, M. F. and Hutchinson, J. W., 1994, "Strain Gradient Plasticity : Theory and Experiment," Acta Metal. Mater., Vol. 42, No.2, pp. 475-487 https://doi.org/10.1016/0956-7151(94)90502-9
- Stölken, J. S. and Evans, A. G., 1998, "A Microbend Test Method for Measuring the Plasticity Length Scale," Acta Materialia, Vol. 46, No. 14, pp. 5190-5115
- Connolley, T., Mchugh, P. E. and Bruzzi, M., 2005, "A Review of Deformation and Fatigue of Metals at Small Size Scales," Fatigue Fract. Engng. Mater. Struct., Vol. 28, pp.1119-1152 https://doi.org/10.1111/j.1460-2695.2005.00951.x
- Beams, J. W., 1959, in Structure and Properties of Thin Films of Gold and Silver, New York, John Wiley and Sons, pp. 183
- Martha, K.S. and Nix, W.D., 1992, "Analysis of the Accuracy of the Bulge Test in Determining theMechanical Properties of Thin Films," Journal of Materials Research, Vol. 7, No. 6, pp. 1553-1563 https://doi.org/10.1557/JMR.1992.1553
- Vlassak, J.J. and Nix, W. D., 1992, "A New Bulge Test Technique for the Determination of Young's Modulus and Poisson's Ratio of Thin Film," Journal of Materials Research, Vol. 7, No. 12, pp. 3242-3249 https://doi.org/10.1557/JMR.1992.3242
- Nicola, L., Xiang, Y., Vlassak, J.J., Van Der Giessen, E. and Needleman, A., 2006, "Plastic Deformation of Freestanding Thin Film: Experiments and Modeling," J. Mech. Phys. Solids, Vol. 54, pp.2089-2110 https://doi.org/10.1016/j.jmps.2006.04.005
- Dieter, M.S., Maibach, J. and Obermeier, E., 1995, "A New Analytical Solution for the Load - Deflection of Square Membranes," Journal of Microelectromechanical systems, Vol. 4, No. 4, pp. 238-241 https://doi.org/10.1109/84.475551
- Bonnotte, E., Delobelle, P. and Bornier, L., 1997, "Two Interferometeric Methods for the Mechanical Characterization of Thin Films by Bulging Tests. Application to Silicon Single Crystal," Journal of Materials Research, Vol. 12, No. 9, pp. 2234-2248 https://doi.org/10.1557/JMR.1997.0299
- Tabata, O., Kawahata, K., Sugiyama, S. and Igarashi, I., 1989, "Mechanical Property Measurements of Thin Films Using Load-Deflection of Composite Rectangular Membranes," Sensors and Actuators, Vol. 20, pp. 135-141 https://doi.org/10.1016/0250-6874(89)87111-2
- Pan, J.Y., Lin, P., Maseeh, F. and Senturia, S.D., 1990, "Verification of FEM Analysis of Load- Deflection Methods for Measuring Mechanical Properties of Thin Films," in Tech. Dig. IEEE Solid- State Sensors and Actuators Workshop, pp. 70-73
- Xiang, Y., Chen, X. and Vlassak, J. J., 2005, "Plane-Strain Bulge Test for Thin Films," Journal of Materials Research, Vol. 20, No. 9, pp. 2360-2370 https://doi.org/10.1557/jmr.2005.0313
- Ljungcrantz, H., Hultman, L., Sundgren, J. E., Johansson, S., Kristensen, N., Schweitz, J. A. and Shute, C. J., 1993, "Residual Stresses and Fracture Properties of Magnetron Sputtered Ti Films on Si Microelements," J. Vac. Sci. Technol., Vol. 11, No. 3, pp. 543-553 https://doi.org/10.1116/1.578770
- Yu Denis Y. W. and Spaepen, F., 2004, "The Yield Strength of Thin Copper Films on Kapton," J. Appl. Phys., Vol. 95, pp. 2991-2997 https://doi.org/10.1063/1.1644634
- Hommel, M., Kraft, O. and Arzt, E., 1999, "A New Method to Study Cyclic Deformation of Thin Films in Tension and Compression," Journal of Materials Research, Vol. 14, pp. 2373-2376 https://doi.org/10.1557/JMR.1999.0317
- Hommel, M. and Kraft, O., 2001, "Deformation Behavior of Thin Copper Films on Deformable Substrates," Acta Materialia, Vol. 49, pp. 3935-3947 https://doi.org/10.1016/S1359-6454(01)00293-2
- Renault, P. O., Villain, P., Coupeau, C., Goudeau, P. and Badawi, K. F., 2003, "Damage Mode Tensile Testing of Thin Gold Films on Polyimide Substrates by X-Ray Diffraction and Atomic Force Microscopy," Thin Solid Films, Vol. 424, pp. 267-273 https://doi.org/10.1016/S0040-6090(02)01127-6
- Kraft, O., Hommel, M. and Arzt, E., 2000, "X-Ray Diffraction as a Tool to Study the Mechanical Behaviour of Thin Films," Materials Science and Engineering A, Vol. 288, pp. 209-216 https://doi.org/10.1016/S0921-5093(00)00876-5
- Nix, W. D., 1989, "Mechanical Properties of Thin Films," Metall. Trans. A, Vol. 20, pp. 2217-2245 https://doi.org/10.1007/BF02666659
- Engler, O. and Huh, M.-Y., 1999, "Evolution of the Cube Texture in High Purity Aluminum Capacitor Foils by Continuous Recrystallization and Subsequent Grain Growth," Materials Science and Engineering A, Vol. 271, pp. 371-381 https://doi.org/10.1016/S0921-5093(99)00254-3
- Czerwinski, F., Li, H., Megret, M., Szpunar, J.A., Clark, D.G. and Erb, U., 1997, "The Evolution of Texture and Grain Size During Annealing of Nanocrystalline Ni-45% Fe Electrodeposits," Scripta Materialia, Vol. 37, pp. 1967-1972 https://doi.org/10.1016/S1359-6462(97)00390-4
- Hall, E. O., 1957, "The Deformation and Aging of Mild Steel: III. Discussion of Results," Proc. Phys. Soc. Lond. B, Vol. 64, pp. 747-753
- Petch, N. J., 1953, "The Cleavage Strength of Polycrystals," J. Iron Steel Inst., Vol. 174, pp. 25-28
Cited by
- Evaluating Interfacial Adhesion Properties of Pt/Ti Thin-Film by Using Acousto-Optic Technique vol.36, pp.3, 2016, https://doi.org/10.7779/JKSNT.2016.36.3.188