Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

Bending Characteristic Evaluations Circular Cross-section Carbon Composite and Hybrid Structural Material

원통단면 탄소복합재와 혼성 구조부재의 굽힘 특성 평가

  • 김정호 (조선대학교 첨단부품소재공학과) ;
  • 정종안 (송원대학교 기계자동차공학과) ;
  • 김지훈 (조선대학교 기계설계공학과)
  • Received : 2012.01.25
  • Accepted : 2012.05.17
  • Published : 2012.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

Carbon Fiber reinforced composite material can be designed for the optimized performances of structural member that have achieve appropriate mechanical properties with cross-sectional shape, fiber direction, stacking sequence and thickness. So there are needed extensive databases each optimal design of CFRP structural member by impact through the preparation of different shape, interface number, thickness and stacking angle. When pressure is applied to structural member, compression, bending and torsion is shown on the corresponding member. For the effective utilization of fiber reinforced composite material as main structural member, optimized design technology should be established to maximize mechanical properties for compression, bending and torsion. In this paper, CFRP prepreg sheet with different stacking angle is manufactured in CFRP and hybrid(Al+CFRP) with circular cross-section. Strength and stiffness is gotten respectively by flexure test. CFRP structure and hybrid structure can be compared with each other. The best design guideline can be analyzed by use of this study result.

Keywords

References

  1. Kim, J. H., Jeong, J. Y., Bang, J. M., Kim, J. H., and Yang, I. Y., 2009, "Characteristics of CFRP Structure of Bending Strength and Rigidity According to Stacking Orientation Angle," AJSE, Vol. 34, No. 1C, pp. 21-27.
  2. Kim, J. H., Yang, Y. J., Im, K. H., Yang, I. Y., and Kim, J. H., 2007, "Characteristics of Bending according to Stacking Sequence for Hybrid Circular Members," International Conference on Smart Materials and Nanotechnology in Engineering, Vol. 6423, pp. 642345.
  3. Kim, J. H., Kim, J. H., Cha, C. H., and Yang, I. Y., 2008, "Bending Characteristics of CFRP & Hybrid Shaped Hat Structure Member according to Stacking Orientation Angle," KSMTE, Vol. 17, No. 3, pp. 34-39.
  4. Sim, J. K., Yang, I. Y., and Oh, T. Y., 1993, "Impact Damage and Residual Bending Strength of CFRP Composite Laminates Involved Difference of Fiber Stacking Orientation and Metrics," Journal of KSPE, Vol. 10, No. 4, pp. 152-162.
  5. Lee, K. S., and Yang, I. Y., 2006, "Influence of Stacking Conditions on the Collapse Characteristics of CFRP Side Member," KSMTE Spring Conference, Vol. 20, No. 5, pp. 397-402.
  6. Kim, Y. N., 2002, Axial Collapse Characteristics of CFRP Composite Thin-wall Structures for Light Weight of Vehicle, A Thesis for a Doctorate, Chosun University, Republic of Korea.
  7. Mamalis, A. G., Manolakos, D. E., Ioannidis, M. B., and Papapostolou, D. P., 2004, "Crash Worthy Characteristics of Axially Statically Compressed Thin-walled Square CFRP Composite Tube : Experimental," Composite structure, Vol. 63, Issue3-4, pp. 347-360. https://doi.org/10.1016/S0263-8223(03)00183-1
  8. Lee, S. H., Kim, C. W., and Choi, N. S., 2006, "Bending Collapse Behaviors and Energy Absorption Characterisitics of Aluminum-GFRP Hybrid Tube Beams," Key engineering materials, Vol. 326-328, pp. 1825-1828. https://doi.org/10.4028/www.scientific.net/KEM.326-328.1825
  9. Almir, B. S., Santos, N., and Lebre, C. L., 2007, "Flexural Stiffness Characterization of Fiber Reinforced Plastic(FRP) Postured Beams," Composite structures, Vol. 81, pp. 274-282. https://doi.org/10.1016/j.compstruct.2006.08.016
  10. Namgung, C., Kim, D. S., and Lee, J. H., 1997, "A Study on the Bending Process of Glass Fiber Reinforced Thermoplastic Composite," Proc. of KSPE Spring Conference, pp. 513-517.
  11. Yang, I. Y., Kim, J. H., and Kim, J. H., 2008, "The Characteristics of Flexure Strength and Rigidity in Light-weight CFRP Members," KSPE, Vol. 25, No. 11, pp. 95-99.
  12. Kim, J. H., and Kim, J. H., 2011, "Evaluation of Bending Characteristics for Carbon FRP Structure having Circle Cross-section," KSMTE, Vol. 20, No. 2, pp. 202-206.
  13. ASTM C1161-02C: 2008, Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature.
  14. ASTM C1341-06: 2000, Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites.
  15. ASTM D6272-02: 2008, Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending.

Cited by

  1. Study on Fastened Properties by Applied to CFRP Laminates of Subminiature Screw vol.38, pp.11, 2014, https://doi.org/10.3795/KSME-A.2014.38.11.1239
  2. Tightening Characteristics Research of M1.4 Subminiature Screw by Applying CFRP Laminates vol.25, pp.1, 2012, https://doi.org/10.1177/096739111702500108