Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Dust Collection Efficiency of Axial-vane Type Cyclone for Oil Mist

오일미스트용 축상 유입식 사이클론의 집진효율에 관한 연구

  • Received : 2011.08.29
  • Accepted : 2012.02.10
  • Published : 2012.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

Dust collecting performance of axial-vane type cyclone for oil mist was analyzed in this study. For predicting cut diameter size of cyclone, the number and angle of vane (${\beta}_2{^{\prime}}$) was calculated by CFD. As the result, ${\beta}_2{^{\prime}}$ was decreased as the number of vane was increased and the angle of inclination (${\beta}_2{^{\prime}}$) decreased, and it cause strong swirl flow. Therefore, it could be confirmed that as the number of vane was increased and the angle of inclination was decreased, cut diameter size was decreased. Also, by verifying the results of CFD through experiment, the cut diameter size could be 2 ${\mu}m$ at 4 $m^3/min$ of flow rate.

Keywords

References

  1. Copper, C. D., and Alley, F. C., 1994, Air Pollution Control: A Design Approach, Waveland Press, New York, pp. 138-150.
  2. Zhou, L. X., and Soo, S. L., 1990, "Gas-Solid Flow and Collection of Solids in a Cyclone Separator," Powder Technology, Vol. 63, No. 1, pp. 45-53. https://doi.org/10.1016/0032-5910(90)80006-K
  3. Song, E. Y., Park, J. Y., and Jang, D. S., 1994, "A Numerical Study for the Performance Analysis of Axial - Vane Type Cyclone Dust Collector," KSWM, Vol. 11, No. 1, pp. 17-28.
  4. Kim, J. S., Lee, T. U., Kang, T. H., Kim, I. K., and Kim, Y. S., 2006, "A CFD Analysis on Axial Inlet Cyclone using Realizable k-$\varepsilon$ Turbulence Model," Conference Proceedings of KSME Spring Annual Meeting, pp. 1327- 1332.
  5. Ju, J. I., Choi, Y. S., Lee, Y. K., Kim, T. H., and Kim, S. Y., 2003, "Numerical Study of Turbulent Flow in a Hydrocyclone," Journal of Flow Machinery, Vol. 6, No. 2, pp. 34-40. https://doi.org/10.5293/KFMA.2003.6.2.034
  6. Young, J. K., Kim, C. N., and Jo, Y. M., 2008, "A Numerical Analysis on the Flow Characteristics and the Collection Efficiency for Fine Particles in a Cyclone," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 20, No. 2, pp. 144-153.
  7. Cho, Y. S., Lee, S. W., Woo, K. S., Yoon, Y. B., Park, Y. J., Lee, D. Y., Kim, H. C., and Na, B. C., 2008, "A Numerical Analysis of Flow Characteristics and Oil Separation Performance for Cyclone Oil Separator Designs," Transactions of KSAE, Vol. 16, No. 5, pp. 22-28.
  8. Shin, H. J., Lee, Y. W., Park, J. H., Kim, J. H., Lee, C. W., and Jang, S. C., 2011, "A Numerical Study on the Performance Analysis for Design Optimization of Axial-vane Type Cyclone," Proceedings of the KSMTE Spring Annual Meeting, pp. 537-538.
  9. Lapple, C. E., and Shepherd, C. B., 1939, "Flow Pattern and Pressure Drop in Dust Cyclone Separator," Ind. & Eng. Chem., Vol. 31, No. 8, pp. 972-984. https://doi.org/10.1021/ie50356a012

Cited by

  1. A study on particle collection efficiency of a low power consumption two-stage electrostatic precipitator for oil mists collection vol.38, pp.7, 2014, https://doi.org/10.5916/jkosme.2014.38.7.834