DOI QR코드

DOI QR Code

A Fundamental Study on the Characteristics of Cement Mortar Using Garnet and Nylon Fiber

가넷과 나일론 섬유를 사용한 시멘트모르타르의 재료적 특성에 관한 기초 연구

  • Received : 2012.03.23
  • Published : 2012.06.25

Abstract

Twelve cement mortar(CM) mixes reinforced with Garnet-Nylon fibers and three control cement mortar mixes with no Garnet-Nylon fibers was tested in order to examine the effect of the W/B and replacement ratio of the Garnet-Nylon fibers on the properties of matter and different material properties of CM. Main variables investigated were W/B and replacement ratio of the Garnet and Nylon fibers. The measured material properties of fiber reinforced CM were analyzed using the two types of strength and compared with those recorded with no Garnet-Nylon fibers reinforced CM. The flow of CM decreased with the increase of the W/B. In addition, compressive strength, bending of CM was higher than those of replacement ratio of the Garnet-Nylon fibers, though the total CM was lower than that with no Garnet-Nylon fiber. For enhancing the toughness and strength of CM, using the GA of 5 % and Nylon fiber of 0.5 % replacement ratio was more effective than using the GA of 10 % and Nylon fiber of 0.7 % replacement ratio.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. Victor C. Li., On Engineered Cementitious Composites(ECC), JCI, pp.215-230, 2003
  2. 양근혁, 강섬유와 PVA섬유로 하이브리드 보강된 콘크리트의 슬럼프 및 역학적 특성, 한국콘크리트학회, 22권, 5호, pp. 651-658, 2010.10
  3. 김병기, 김용태, 안태호, 김광련, 섬유보강 콘크리트에서 나일론 섬유의 응용가능성, 콘크리트학회지, 16권 6호, pp. 65-73, 2004.11
  4. 오병환, 이형준, 강영진, 섬유 콘크리트의 강도 및 역학적 특성에 관한 연구, 대한토목학회논문집, 9권, 3호, pp. 49-56, 1989
  5. Balaguru, P. and Shah, S., Fiber Reinforced Cement Composites, McGraw Hill, 1992.
  6. A.M.Neville, Properties of Concrete, The Pitman Press, 1973
  7. Beaudoin. J. J., Handbook of Fiber Reinforced Concrete, Noyes Publications, 1990
  8. ICBO Engineering Services Inc(ES), Effectiveness of Nylon Fiber as Reinforcement in Hardened Concrete, Engineering Report, 1997.12
  9. P.Jahren, Use of Silica Fume in Concrete, Fly Ash, Silica Fume, Slag and other Mineral By-products in Concrete, ACI SP-79, 1983, pp. 625-642
  10. 白井 馬, ガ-ネット砂を用いたポリマ-セメントモルタルの壓縮强度さと細孔容積の關係, 日本建築學會大會學術講演梗槪集, 1997.9, PP 695-696
  11. 白井 馬, ガ-ネット砂を用いたポリマ-セメントモルタルの 强さ性狀, 日本建築學會大會學術講演梗槪集, 1996.9, PP 865-866
  12. 이승조, Nylon섬유와 Garnet을 사용한 고인성 모르타르의 강도 특성, 대한건축학회 학술발표대회논문집 구조계, 31권, 2호, pp. 333-334, 2011.10
  13. Bentur. A. and Mindess, S., Fiber Reinforced Cementitious Composites, Elsevier Applied Science, London, 1990
  14. 최낙운, 김윤나, 타일시멘트 몰탈의 굳지 않은 물성에 미치는 메틸셀룰로오스 치환도의 영향, 대한건축학회 학술발표대회 논문집 구조계, 30권, 1호, pp. 223-224, 2010.10
  15. 三橋博三, セメント系複合材料設計の破壞力學の應用, コソリ-ト工學年次論文集, Vol.12, No.1, pp. 1175-1180, 1990
  16. Marshall, D. B., Cox, B. N. and Evans, A. G., The Mechanics of Matrix Cracking in Brittle-Matrix Fiber Composites, Acta Meall, Vol.33, pp. 2013-2021, 1985 https://doi.org/10.1016/0001-6160(85)90124-5
  17. Bao, G., and Song, Y., Crack Bridging Models for Fiber Composites with Slip-Dependent Interface, J. of Mech, Phys, Solids, Vol. 41, No. 9, pp. 1425-1444, 1993 https://doi.org/10.1016/0022-5096(93)90033-C
  18. Li, V. C., Wang, Y. and Backer, S., A Micromechanical Model of Tension-Softening and Bridging Toughening of Short Random Fiber Reinforced Brittle Matrix Composites, J. of Mech, Phys. Solids, Vol. 39, No. 5, pp. 607-625, 1991 https://doi.org/10.1016/0022-5096(91)90043-N
  19. Kanda, T. and Li, V. C., Effect of Apparent Strength and Fiber Matrix Interface Properties on Crack Bridging in Cementitious Composites, Journal of Engineering Mechanics, ASCE, Vol. 125, No. 3, pp. 1-10, 1999 https://doi.org/10.1061/(ASCE)0733-9399(1999)125:1(1)
  20. Lin, Z., Kanda, T. and Li, V. C., On Inteface Property Characterization and Performance of Fiber Reinforced Cementitious Composites, J. Concrete Science and Engineering, RILEM, Vol. 1, pp. 173-184, 1999
  21. Wei Ling Lin, Toughness Behavior of Fiber Reinforced Concrete, Fiber Reinforced Cement and Concrete, Edited by R. N. Swamy, RILEM, 1992