References
- A. L. Hoffmanner, 2005, ASM Handbook Volume 14A: Metalworking: Bulk Forming, ASM Internatioinal, USA, pp. 156-171.
- P. Ambom, S. K. Ghosh, I. K. Leadbetter, 1997, Modern Side-shafts for Passenger Cars: Manufacturing Processes II - Monobloc Tube Shafts, J. Mater. Process. Technol., Vol. 63, No. 1-3, pp. 225-232. https://doi.org/10.1016/S0924-0136(96)02746-X
- S. J. Lim, D. J. Yoon, K. H. Na, 1998, The Forming Characteristic of Rotary Swaging Process, Trans. Mater. Process., Vol. 7, No. 5, pp. 432-438.
- S. J. Lim, H. J. Choi, C. H. Lee, 2009, Forming Characteristics of Tubular Product through the Rotary Swaging Process, J. Mater. Process. Technol., Vol. 209, No. 1, pp. 283-288. https://doi.org/10.1016/j.jmatprotec.2007.08.086
- A. Piela, F. Grosman, 1996, Spatial Modeling of Swaging Process using Finite Element Method applied to Axially-symmetrical Problems, J. Mater. Process. Technol., Vol. 60, No. 1-4, pp. 517-522. https://doi.org/10.1016/0924-0136(96)02380-1
- A. Piela, 1997, Analysis of the Metal Flow in Swaging-numerical Modeling and Experimental Verification, Int. J. Mech. Sci., Vol. 39, No. 2, pp. 221-231. https://doi.org/10.1016/0020-7403(96)00056-2
- J. R. Cho, J. I. Song, K. T. Noh, D. H. Jeon, 2005, Nonlinear Finite Element Analysis of Swaging Process for Automobile Power Steering Hose, J. Mater. Process. Technol., Vol. 170, No. 1-2, pp. 50-57. https://doi.org/10.1016/j.jmatprotec.2005.04.077
- R. Li, Z. R. Nie, T. Y. Zuo, 2006, FEA Modeling of Effect of Axial Feeding Velocity on Strain Field of Rotary Swaging Process of Pure Magnesium, Trans. Nonferrous Met. Soc. China, Vol. 16, No. 5, pp. 1015-1020. https://doi.org/10.1016/S1003-6326(06)60370-1
- J. H. Jang, W. H. Kwon, Y. H. Moon, 2009, Proc. Kor. Soc. Mech. Eng. Fall Conf.(S. Y. Lee), Kor. Soc. Mech. Eng., Pyeongchang, Korea, pp. 1173-1178.
- MFRC, 2010, AFDEX, http://www.afdex.com