References
- S. S. Hong, M. H. Kim, Y. H. Kim, 1995, Analysis of Superplastic Forming Processes using Finite Element Method, Trans. Kor. Soc. Mech. Eng., Vol. 19, No. 6, pp. 1411-1421.
- A. J. Barnes, 2007, Superplastic Forming 40 Years and Still Growing, J. Mater. Eng. Perform., Vol. 14, No. 4, pp. 440-454.
- J. M. Lee, S. S. Hong, Y. H. Kim, 1999, Blank Design for Optimized Thickness Distribution for Axi-Symmetric Superplastic Blow Forming, Trans. Mater. Process., Vol. 8, No. 1, pp. 92-100.
- J. S. Song, Y. K. Kang, S. S. Hong, Y. N. Kwon, J. H. Lee, Y. H. Kim, 2007, Process Design of Superplastic Forming/Diffusion Bonding by using Design of Experiment, Trans. Mater. Process., Vol. 16, No. 2, pp. 144-149. https://doi.org/10.5228/KSPP.2007.16.2.144
- A. K. Ghosh, C. H. Hamilton, 1979, Mechanical Behavior and Hardening Characteristics of a Superplastic Ti-6Al-4V Alloy, Metall. Trans. A, Vol. 10, No. 6, pp. 699-706. https://doi.org/10.1007/BF02658391
- D. H. Shin, U. Y. Choi, Y. J. Joo, S. C. Maeng, 1997, Cavity Formation in a Superplastic 7075 Al Alloy, J. Kor. Inst. Met. Mater., Vol. 35, No. 9, pp. 1102-1108.
- C. H. Hamilton, H. M. Zbib, C. H. Johnson, S. K. Richter, 1991, Superplasticity in Advanced Materials(eds. S. Hori, M. Tokizame, and N. Furushiro), The Japan Society for Research on Superplasticity, Osaka, Japan, pp. 127-133.
- J. H. Lee, C. S. Lee, 1997, A Study on the Bulge Forming Process of Superplastic Ti-6Al-4V Alloy, J. Kor. Inst. Met. Mater., Vol. 35, No. 10, pp. 1325-1331.
- T. W. Kim, 2001, Micromechanical Superplastic Model for the Analysis of Inhomogeneous Deformation in Heterogeneous Microstructure, Trans. Kor. Soc. Mech. Eng. A, Vol. 25, No.12, pp. 1933-1943.
- H. Tan, P. Gao, J. Lian, 2001, Microstructural Modeling and Numerical Analysis for the Superplastic Forming Process, Mater. Manuf. Processes, Vol. 16, No.3, pp. 331-340. https://doi.org/10.1081/AMP-100107378
- J. Lin, F. P. E. Dunne, 2001, Modeling Grain Growth Evolution and Necking in Superplastic Blow-Forming, Int. J. Mech. Sci., Vol. 43, No. 3, pp. 595-609. https://doi.org/10.1016/S0020-7403(00)00055-2
- B. H. Cheong, J. Lin, A. A. Ball, 2003, Modeling the Effects of Grain-Size Gradients on Necking in Superplastic Forming, J. Mater. Process. Technol., Vol. 134, No. 1, pp. 10-18. https://doi.org/10.1016/S0924-0136(02)00216-9
- M. A. Nazzale, M. K. Khraisheh, B. M. Darras, 2004, Finite Element Modeling and Optimization of Superplastic Forming using Variable Strain Rate Approach, J. Mater. Eng. Perform., Vol. 13, No. 6, pp. 691-699. https://doi.org/10.1361/10599490421321
- A. K. Ghosh, C. H. Hamilton, 1982, Influences of Material Parameters and Microstructure on Superplastic Forming, Metall. Mater. Trans. A, Vol. 13, No. 5, pp. 733-743. https://doi.org/10.1007/BF02642386
- M. A. Clark, T. H. Alden, 1973, Deformation Enhanced Grain Growth in a Superplastic Sn-1% Bi Alloy, Acta Metall., Vol. 21, No. 9, pp. 1195-1206. https://doi.org/10.1016/0001-6160(73)90160-0
- C. H. Caceres, D. S. Wilkinson, 1984, Large Strain Behavior of a Superplastic Copper Alloy-I. Deformation, Acta Metall., Vol. 32, No. 3, pp. 415-422. https://doi.org/10.1016/0001-6160(84)90115-9
- S. Richter, C. H. Hamilton, 1993, Deformation Enhanced Grain Growth in a Two Phase Titanium Alloy, Mater. Sci. Forum, Vol. 113-115, pp. 195-200. https://doi.org/10.4028/www.scientific.net/MSF.113-115.195
- T. K. Ha, J. R. Son, Y. W. Chang, 1998, Superplastic Deformation Behavior of a Zn-0.3wt.%Al Alloy, J. Kor. Inst. Met. Mater., Vol. 36, No. 8, pp. 1242-1248.
- J. S. Kim, J. H. Kim, C. G. Park, C. S. Lee, 1998, Microstructural Analysis on the Creep and Superplastic Deformation of Two-Phase Ti-6Al-4V Alloy, J. Kor. Inst. Met. Mater., Vol. 36, No. 7, pp. 1046-1054.
- O. N. Senkov, M. M. Myshlyaev, 1986, Grain Growth in a Superplastic Zn-22% Al Alloy, Acta Metall., Vol. 34, No. 1, pp. 97-106. https://doi.org/10.1016/0001-6160(86)90236-1
- Y. H. Kim, S. S. Hong, J. S. Lee, R. H. Wagoner, 1996, Analysis of Superplastic Forming Processes using a Finite-Element Method, J. Mater. Process. Technol., Vol. 62, No. 1-3, pp. 90-99. https://doi.org/10.1016/0924-0136(95)02223-6
- M. Bellet, E. Massoni, J. L. Chenot, 1990, Numerical Simulation of Thin Sheet Forming Processes by the Finite Element Method, Eng. Comput., Vol. 7, No. 1, pp. 21-31. https://doi.org/10.1108/eb023790
- J. H. Yoon, H. S. Lee, Y. S. Jang, Y. M. Yi, 2003, Theoretical Analysis for Prediction of Thickness Variation in Superplastic Forming Process of Spherical Pressure Vessel, Aerosp. Technol., Vol. 2, No. 2, pp. 133-141.
- A. A. Kruglov, F. U. Enikeev, R. Ya. Lutfullin, 2002, Superplastic Forming of a Spherical Shell out a Welded Envelope, Mater. Sci. Eng. A, Vol. 323, No. 1-2, pp. 416-426. https://doi.org/10.1016/S0921-5093(01)01376-4
- D. H. Bae, A. K. Ghosh, 2000, Grain Size and Temperature Dependence of Superplastic Deformation in an Al-Mg Alloy under Isostructural Condition, Acta Metall., Vol. 48, No. 6, pp. 1207-1224.