References
- M. Kobayashi, 1988, The Present Situation of Cold Drawn Special Section, J. Jpn. Soc. Technol. Plast., Vol. 39, No. 447, pp. 335-337.
- K. Yoshida, E. Hosaka, E. Miyazaki, Y. Taki, J. Shinbe, 1992, Proc. 43rd Jpn. Joint Conf. Technol. Plast., JSTP, Japan, pp. 371-374.
- T. K. Lee, C. J. Lee, S. K. Lee, B. M. Kim, 2009, Prediction of Drawing Load in the Shape Drawing Process, Trans. Mater. Process., Vol. 18, No. 4, pp. 323-328. https://doi.org/10.5228/KSPP.2009.18.4.323
- H. K. Shin, S. R. Lee, C. H. Park, D. Y. Yang, 2002, The Optimal Design of Preform in 3-D Forging by using Electric Field Theory, Trans. Mater. Process., Vol. 11, No. 2, pp. 165-170. https://doi.org/10.5228/KSPP.2002.11.2.165
- J. E. Lee, T. K. Lee, S. K. Lee, B. M. Kim, 2008, Design of the Cross Sectional Shape of Intermediate Die for Shaped Drawing of Spline, Trans. Mater. Process., Vol. 17, No. 8, pp. 627-632. https://doi.org/10.5228/KSPP.2008.17.8.627
- JSTP, 1990, Wire Drawing, Corona, Japan, p. 44.
- A. Geleji, 1995, Die Berechnung der Krafte und des Arbeitsbedrafts bei Formgebung im Bildsame Zunstande der Metalle, Akademi-Verleg, Budapest, p. 10.
Cited by
- Process Design of Multi-Pass Shape Drawing of Wire with Asymmetric Trapezoid Profiles vol.24, pp.3, 2015, https://doi.org/10.5228/KSTP.24.3.187
- Design Method for the Intermediate Dies in Multi-Stage Shape Drawing: The Case for a Hollow Linear Motion Guide Rail vol.24, pp.3, 2015, https://doi.org/10.5228/KSTP.24.3.15
- Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms vol.29, pp.8, 2015, https://doi.org/10.1007/s12206-015-0741-6
- Process Design for Multi-pass Profile Drawing using Round Materials vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.234