Browse > Article
http://dx.doi.org/10.5228/KSTP.2012.21.4.265

Process Design of Multi-pass Shape Drawing Considering the Drawing Stress  

Kim, S.M. (부산대 대학원 정밀가공시스템 전공)
Lee, S.K. (한국생산기술연구원 녹색전환기술센터)
Lee, C.J. (부산대 대학원 정밀가공시스템 전공)
Kim, B.M. (부산대 기계공학부)
Jeong, M.S. (한국생산기술연구원 녹색전환기술센터)
Kim, B.M. (계명대 기계자동차공학부)
Publication Information
Transactions of Materials Processing / v.21, no.4, 2012 , pp. 265-270 More about this Journal
Abstract
In this study, a process design method for the multi-pass shape drawing is proposed with consideration of the drawing stress. First, the shape drawing load was calculated to evaluate the shape drawing stress, and the intermediate die shape was determined by using an electric field analysis and the average reduction ratio. In order to evaluate whether material yielding occurs at the die exit, the drawing stress was determined by using the calculated shape drawing load. Finally, FE-analysis and shape drawing experiments were conducted to validate the design of the multi-pass shape drawing process. From the results of the FE-analysis and shape drawing experiments, it was possible to produce a sound shape drawn product with the designed process. The dimensional tolerances of the product were within the allowable tolerances.
Keywords
Multi-pass Shape Drawing; Process Design; Drawing Load; Drawing Stress; Electric Field Analysis; FE-Analysis; Shape Drawing Experiment;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 M. Kobayashi, 1988, The Present Situation of Cold Drawn Special Section, J. Jpn. Soc. Technol. Plast., Vol. 39, No. 447, pp. 335-337.
2 K. Yoshida, E. Hosaka, E. Miyazaki, Y. Taki, J. Shinbe, 1992, Proc. 43rd Jpn. Joint Conf. Technol. Plast., JSTP, Japan, pp. 371-374.
3 T. K. Lee, C. J. Lee, S. K. Lee, B. M. Kim, 2009, Prediction of Drawing Load in the Shape Drawing Process, Trans. Mater. Process., Vol. 18, No. 4, pp. 323-328.   DOI
4 H. K. Shin, S. R. Lee, C. H. Park, D. Y. Yang, 2002, The Optimal Design of Preform in 3-D Forging by using Electric Field Theory, Trans. Mater. Process., Vol. 11, No. 2, pp. 165-170.   DOI
5 J. E. Lee, T. K. Lee, S. K. Lee, B. M. Kim, 2008, Design of the Cross Sectional Shape of Intermediate Die for Shaped Drawing of Spline, Trans. Mater. Process., Vol. 17, No. 8, pp. 627-632.   DOI
6 JSTP, 1990, Wire Drawing, Corona, Japan, p. 44.
7 A. Geleji, 1995, Die Berechnung der Krafte und des Arbeitsbedrafts bei Formgebung im Bildsame Zunstande der Metalle, Akademi-Verleg, Budapest, p. 10.