DOI QR코드

DOI QR Code

탄소섬유 앵커 X-브레이싱으로 보강된 철근콘크리트 기둥의 구조거동 및 내진보강 효과

Retrofitting Effects and Structural Behavior of RC Columns Strengthened with X-Bracing Using Carbon Fiber Anchor

  • 심종성 (한양대학교 건설환경공학과) ;
  • 이강석 (전남대학교 건축공학과) ;
  • 권혁우 (한양대학교 건설환경공학과) ;
  • 김현중 (한양대학교 건설환경공학과)
  • Sim, Jong-Sung (Dept. of Civil & Environmental Engineering, Hanyang University) ;
  • Lee, Kang-Seok (School of Architecture, Chonnam National University) ;
  • Kwon, Hyuck-Woo (Dept. of Civil & Environmental Engineering, Hanyang University) ;
  • Kim, Hyun-Joong (Dept. of Civil & Environmental Engineering, Hanyang University)
  • 투고 : 2012.02.20
  • 심사 : 2012.05.22
  • 발행 : 2012.06.30

초록

이 논문에서는 콘크리트 기둥에 새로운 보강방법을 제시하여 반복하중에 대한 구조적인 성능시험을 하였다. 두 개의 콘크리트 기둥에 고성능 탄소섬유 다발을 이용하여 X자 형태의 보강을 실시하고, 기둥의 내부에 X-브레이싱을 고정하기 위해 기둥 단면을 천공하여 탄소섬유 다발을 기둥에 삽입한 후 탄소섬유로 단부를 감싸주는 새로운 보강방법인 탄소섬유 앵커 X-브레이싱 보강공법을 이용해 콘크리트 기둥의 구조성능과 보강효과를 시험을 통하여 규명하였다. 이를 위해 탄소섬유로 보강된 휨 파괴형 실험체 기둥과 전단 파괴형 실험체 기둥을 축소모형으로 각각 제작하였다. 휨과 전단저항 기둥에 대해 X-브레이스 보강 유, 무 실험체에 반복하중시험을 통해 기둥의 연성과 강도 보강효과를 확인하였다.

This paper presents a new strengthening method on concrete column against seismic loads for structural performance tests. An X-bracing using high performance carbon fiber threads called the "Carbon fiber anchor X-bracing system" is used to connect RC frames internally. The carbon fiber sheet is wrapped around the column to fix the top and bottom of the column after Super anchor was installed by drilling hole on the column. The structural performance was evaluated experimentally and analytically. Two types of columns specimens were made; flexure fracture scaled model and shear fracture scaled model. For the performance evaluation, cyclic loading tests were conducted on moment and shear resisting columns with and without X bracing. Test results confirmed that the bracing system installed on RC columns enhanced the strength capacity and provided adequate ductility.

키워드

참고문헌

  1. 박종섭, 박영환, 유영준, 정우태, 강재윤, "부착 또는 비부착된 탄소판으로 긴장 보강된 RC 보의 보강성능," 콘크리트학회 논문집, 17권, 1호, 2005, pp. 279-282.
  2. 심종성, "철근콘크리트 구조물의 보수.보강 신기술 개발," 연구보고서, R&D 94-0039, 한양대학교, 1996, pp. 17-34.
  3. 오홍섭, 심종성, 주민관, "탄소섬유 보강재로 표면매립에 의해 보강된 철근 콘크리트 보의 휨 보강성능," 구조물 진단학회지, 12권, 3호, 2008, pp. 84-94.
  4. Jones, E. A. and Jirsa, J. O., "Seismic Strengthening of a Reinforced Concrete Frame Using Structural Steel Bracing," Report on a Research Project, National Science Foundation, 1986, pp. 63-77.
  5. Viswanath, K. G., Prakash, K. B., and Desai, A., "Seismic Analysis of Steel Braced Reinforced Concrete Frames," International Journal of Civil and Structural Engineering, Vol. 1, No. 1, 2010, pp. 114-122.
  6. Youssef, M. A., Ghaffarzadeh, H., and Nehdi, M., "Seismic Performance of RC Frames with Concentric Internal Steel Bracing," Engineering Structures, Vol. 29, Issue 7, 2007, pp. 1561-1568. https://doi.org/10.1016/j.engstruct.2006.08.027
  7. Maheri, M. R. and Sahebi, A., "Experimental Investigation on the Use of Steel Bracing in Reinforced Concrete Frames," Proceedings of the Second International Conference on Seismic and Earthquake Engineering, Iran, 1995, pp. 775-784.
  8. Maheri, M. R. and Sahebi, A., "Use of Steel Bracing in Reinforced Concrete Frames," Engineering Structures, Vol. 19, No. 12, 1997, pp. 1018-1024. https://doi.org/10.1016/S0141-0296(97)00041-2
  9. Chang, H. Y. and Chiu, C. K., "Performance Assessment of Buckling Restrained Braces," Procedia Engineering, Vol. 14, 2011, pp. 2187-2195. https://doi.org/10.1016/j.proeng.2011.07.275