DOI QR코드

DOI QR Code

A Contactless Power Supply for a DC Power Service

  • Kim, Eun-Soo (Dept. of Electrical & Electronics Engineering, Jeonju University) ;
  • Kim, Yoon-Ho (Dept. of Electrical & Electronics Engineering, Chung-Ang University)
  • Received : 2012.10.07
  • Accepted : 2012.11.19
  • Published : 2012.12.01

Abstract

It is expected that, in the future, DC power service will be widely used for photovoltaic home power generation systems, since DC consuming devices are ever increasing. Instead of using multiple converters to convert DC to AC and then AC to DC, the power service could solely be based on DC. This would eliminate the need for converters, reducing the cost, complexity, and possibly increasing the efficiency. However, configuration of direct DC power service with mechanical contacts can cause spark voltage or an electric shock when the switch is turned on and off. To solve these problems, in this paper, a contactless power supply for a DC power service that can transfer electric power produced by photovoltaics to the home electric system using magnetic coupling instead of mechanical contacts has been proposed. The proposed system consists of a ZVS boost converter, a half-bridge LLC resonant converter, and a contactless transformer. This proposed contactless system eliminates the use of DC switches. To reduce the stress and loss of the boost converter switching devices, a lossless snubber with coupled inductor is applied. In this paper, a switching frequency control technique using the contactless voltage sensing circuit is also proposed and implemented for the output voltage control instead of using additional power regulators. Finally, a prototype consisted of 150W boost converter has been designed and built to demonstrate the feasibility of the proposed contactless photovoltaic DC power service. Experimental results show that 74~83% overall system efficiency is obtained for the 10W~80W load.

Keywords

References

  1. Gurkaynak, Y., Khaligh, A., "Control and Power Management of a Grid Connected Residential Photovoltaic System with Plug-in Hybrid Electric Vehicle (PHEV) Load" Applied Power Electronics Conference and Exposition, 2009. APEC 2009. Twenty-Fourth Annual IEEE
  2. Bangyin Liu, Chaohui Liang, Shanxu Duan; "Design Considerations and Topology Selection for DC Module Based Building Integrated Photovoltaic System" IndustrialElectronics and Applications, 2008. ICIEA 2008. 3rd IEEE Conference on 3-5 June 2008 Page(s):1066 - 1070
  3. Rodriguez-Otero, M.A.; O'Neill-Carrillo, E.; "Efficient Home Appliances for a Future DC Residence" Energy 2030 Conference, 2008. ENERGY 2008. IEEE 17-18 Nov. 2008 Page(s):1 - 6
  4. Engelen, K., Leung Shun, E.; Vermeyen, P., Pardon, I., D'hulst, R., Driesen, J., Belmans, R., "The Feasibility of Small-Scale Residential DC Distribution Systems" IEEEIndustrial Electronics, IECON 2006 - 32nd Annual Conference on 6-10 Nov. 2006 Page(s):2618 - 2623
  5. Browne, T. J., Browne, N. R., "Power Quality Considerations for Utilities Supplying Residential DC Installations" Harmonics and Quality of Power, 2008. ICHQP 2008. 13th International Conference on Sept. 28 2008-Oct. 1 2008 Page(s):1 - 5
  6. Bangyin Liu, Shanxu Duan, Yong Kang, "A DC-Module-Based Power Configuration for Residential Photovoltaic Power Application" Power Electronics and Drive Systems, 2007. PEDS '07. 7th International Conference on 27-30 Nov. 2007 Page(s):631 - 636
  7. G. Joung, B. Cho, "An Energy Transmission System for an Artificial Heart Using Leakage Inductance Compensation of Transcutaneous Transformer." IEEE Transactions on Power Electronics 1998, 13(6):1013-1022. https://doi.org/10.1109/63.728328
  8. T. Nishimura, K. Hirachi, Y. Maejima Y, K. Kuwana K, M. Saito, "Characteristics of a Novel Energy Transmission for a Rechargeable Cardiac Pacemaker by Using a Resonant DC-DC converter." IEEE IECON'93 1993; 2:875-880.
  9. J. De Boeij, E. Lomonova, and A. Vandenput, "Contactless Energy Transfer to a Moving Load - Part I : Topology Synthesis and FEM simulation," IEEE International Industrial Electronics, Page(s): 739-744, July 2006
  10. C. Wang, G.A. Covic, O.H. Stielau, Power Transfer Capability and Bifurcation Phenomena of Loosely Coupled Inductive Power Transfer Systems, IEEE Trans. On Industrial Electronics, Vol.51, NO. 1, Feb.2004, pp. 148-157 https://doi.org/10.1109/TIE.2003.822038
  11. K.D. Papastergiou, D.E. Macpherson, "An Airborne Radar Power Supply with Contactless Transfer of Energy - Part I: Rotating Transformer," IEEE Trans. Ind. Electronics, Vol. 54, NO. 5, pp 2874 - 2884, Oct. 2007 https://doi.org/10.1109/TIE.2007.902044
  12. L. Xun; S.Y. Hui: "Simulation Study and Experimental Verification of a Universal Contactless Battery Charging Platform With Localized Charging Features," IEEE Trans. Power Electronics, Vol. 22, NO. 6, Page(s): 2202-2210, Nov.2007 https://doi.org/10.1109/TPEL.2007.909301
  13. X. Kiu; S.Y.R. Hui: "Optimal Design of a Hybrid Winding Structure for Planar Contactless Battery Charging Platform", IEEE Trans. Power Electronics, Vol. 23, No. 1, Page(s):455-463, Jan.2006
  14. K.D. Papastergiou, D.E. Macpherson; F. Fisger, "An Airborne Radar Power Supply with Contact-less Transfer of Energy - Part I: Rotating transformer," IEEE Trans. Ind. Electronics, Vol. 54, no. 5, pp. 2874-2884, Oct 2007 https://doi.org/10.1109/TIE.2007.902044
  15. M.G. Egan, D.L. O'Sullivan, J.G. Hayes, M.J. Willers, and C.P. Henze," Power-Factor-Corrected Single-Stage Inductive Charger for Electric Vehicle Batteries," IEEE Trans. Ind. Electronics Vol. 54, no.2, pp. 1217-1226, April 2007 https://doi.org/10.1109/TIE.2007.892996
  16. P. Sergeant, and A. Van den Bossche, "Inductive Coupler for Contactless Power Transmission," IET Electric Power Applications, Vol. 2, no. 1, pp.1-7, Jan. 2008 https://doi.org/10.1049/iet-epa:20070059
  17. R. Steigerward, "A comparison of Half-bridge Resonant Converter Topologies". IEEE Transactions on Power Electronics, 1988; 3(2):174-182.. 4 https://doi.org/10.1109/63.4347