참고문헌
- T. Todaka, K.Nakanoue and M.Enokizono, "Magnetic field analysis under complex approximation taking account of two-dimensional magnetic properties", The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 28, No. 1, pp. 98-108, 2009. https://doi.org/10.1108/03321640910918904
- N. Soda and M. Enokizono, "Improvement of T-joint part constructions in three-phase transformer cores by using direct loss analysis with E&S model," IEEE Trans. Magn., vol.MAG-36, pp. 1724-1727, July 2000.
- M. Enokizono and N. Soda, "Direct magnetic loss analysis by FEM considering vector magnetic properties," IEEE Trans. Magn., vol.34, pp. 188-195, Sept. 1998.
- Y. Maeda, T. Todaka, H. Simoji, M. Enokizono and J. Sievert, "An evaluation method of cross-type H-coil angle for accurate two-dimensional vector magnetic measurement", Journal of Magnetism and Magnetic Materials, Vol. 304, Issue 2, pp.564-567, September 2006. https://doi.org/10.1016/j.jmmm.2006.02.176
- Kohsaka.T, Takahashi.N, Nogawa.S, Kuwata.M : "Analysis of magnetic characteristics of three-phase reactor made of grain-oriented silicon steel", IEEE Trans. Magn., Vol.36, No.4, p.1894-1897 (2000) https://doi.org/10.1109/20.877815
- Nakano.M, Nishimoto.H, Fujiwara.K, Takahashi.N : "Improvements of single sheet testers for measurement of 2- D magnetic properties up to high flux density", IEEE Trans. Magn., Vol.35, No.5, p.3965-3967 (1999) https://doi.org/10.1109/20.800723
- Mori.K, Yanase.S, Okazaki.Y, Hashi.S. : "2-D magnetic rotational loss of electrical steel at high magnetic flux density", IEEE Trans. Magn., Vol.41, No.10, p.3310-3312 (2005) https://doi.org/10.1109/TMAG.2005.854908