참고문헌
- Kim, J. Y., Lee, C. J., Lee, S. K., Ko, D. C. and Kim, B. M., 2009, "Effect of Shape Parameters of Tool on Improvement of Joining Strength in Clinching," Transactions of Materials Processing, Vol. 18, No.5, pp.393-400.
- Lim, D. H., Lee, B. W., Rhyu, H. H. and Kim, K. K., 2003, "An Experimental Study on the Strength Evaluation of Al-5052 Tensile-Shear Specimens Using a Mechanical Press Joining Method," Trans. of KSMTE(A), Vol.12, No. 1, pp.58-64.
- Barnes, T. A., Pashby, I. R., 2000, "Joining Techniques for Aluminium Spaceframes Used in Automobiles Part II - Adhesive Bonding and Mechanical Fasteners," Journal of Materials Processing Technology, Vol.99, No. 1-3, pp.72-79. https://doi.org/10.1016/S0924-0136(99)00361-1
- Jayasekara, V. R., Noh, J. H., Hwang, B. B., Ham, K. C., Jang, D. H., 2007, "A Study on the Forming Characteristics of Clinching Joint Process," Transactions of Materials Processing, Vol.16, No.8, pp.603-613. https://doi.org/10.5228/KSPP.2007.16.8.603
- Varis, J. P., 2006, "Economics of Clinched Joint Compared to Riveted Joint and Example of Applying Calculations to a Volume Product," Journal of Materials Processing Technology, Vol. 172, pp.130-138. https://doi.org/10.1016/j.jmatprotec.2005.09.009
- Varis, J. et al., 2003, "A Simple Testing-Based Procedure and Simulation of the Clinching Process Using Finite Element Analysis for Establishing Clinching Parameters," Thin-Walled Structures, Vol.41, pp. 691-709.
- Lee, Y. B., Chung, C. S., Kim, T. Y., Cha, B. S., 1998, "A Study on the Optimum Conditions for Improving the Joining Strength in Clinch Joint," Proceedings of KSME Conference, pp. 244-249.
- Mucha, J., 2011, "The Analysis of Lock Forming Mechanism in the Clinching Joint," Materials & Design, Vol. 32, pp.4943-4954. https://doi.org/10.1016/j.matdes.2011.05.045
- Lee, C. J., Lee, S. K., Lee, S. B., Kim, B. M., 2010, "Characteristic of Mechanical Clinching for Al5052 to High-Strength Steels," Trans. of KSME(A), Vol.34, No.8, pp.997-1006.
- Lee, C. J., Kim, J. Y., Lee, S. K., Ko, D. C., Kim, B. M., 2010, "Parametric Study on Mechanical Clinching Process for Joining Aluminum Alloy and High-Strength Steel Sheets," Journal of Mechanical Science and Technology, Vol. 24, pp. 123-126. https://doi.org/10.1007/s12206-009-1118-5
- Kim, J. Y., Lee, C. J., Lee, S. K., Ko, D. C., Kim, B. M., 2008, "The Effect of Adhesive Layer on Joining Strength of the Hybrid Clinching Joint," Proceedings of KSME Conference, pp.220-225.
- Kim, T. H., Suh, J., Kang, H. S., Lee, Y. S., Park, C. D., 2011, "Fatigue Assessment Using SPR and Adhesive on Dissimilar Materials," Journal of KSPE, Vol. 28, No. 10, pp. 1204-1209.
피인용 문헌
- Design of hole-clinching process for joining CFRP and aluminum alloy sheet vol.15, pp.6, 2014, https://doi.org/10.1007/s12541-014-0450-6
- Influence of Tool Shape on Hole Clinching for Carbon Fiber-Reinforced Plastic and SPRC440 vol.6, pp.1687-8140, 2014, https://doi.org/10.1155/2014/810864
- Clinching process for joining dissimilar materials: state of the art vol.82, pp.1-4, 2016, https://doi.org/10.1007/s00170-015-7363-0
- Clinching for sheet materials vol.18, pp.1, 2017, https://doi.org/10.1080/14686996.2017.1320930