Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지
DOI QR코드

DOI QR Code

Optimization of Multi-tasking Vertical Lathe For Windmill Parts

풍력 발전기 부품가공용 복합수직선반의 최적 설계에 관한 연구

  • Received : 2011.11.30
  • Accepted : 2011.12.26
  • Published : 2012.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Wind power, which is one of the promising renewable energies, has shown the high growth rate of 35 % of the annual average in the recent 5 years and also windmill related equipment market has been fast-growing. Yaw & Pitch bearing are the key parts of windmill and are machined by huge vertical lathe which is monopolized by the advanced countries. The purpose of this study is to develop the multi-tasking vertical lathe for 5 MW grade windmill bearings, which might be mass produced 3 or 5 years later. In this study, the structure of the crossrail and rotary table, which are the key units of the huge multi-tasking vertical lathe, were optimized through the finite element analysis. Also the basic performance of the rotary table has been evaluated.

Keywords

References

  1. WWEA, "World Wind Energy Report 2010," 2010.
  2. Brecher, C., Manoharan, D. and Klein, W., "Active Compensation for Portal Machines," Production Engineering, Vol. 4, No. 2-3, pp. 255-260, 2010. https://doi.org/10.1007/s11740-010-0212-y
  3. Brecher, C., Manoharan, D. and Stephan Witt, E. W. E., "Structure Integrated Adaptronical Systems for Machine Tools," Production Engineering, Vol. 2, No. 2, pp. 219-223, 2008. https://doi.org/10.1007/s11740-007-0074-0
  4. Lee, M. G., Song, K. H., Choi, H. B. and Lee, D. Y., "The Displacement Minimization of the tool Center Point by the Crossrail Structure Improvement of the Portal Machine," Journal of KSMTE, Vol. 20, No. 3, pp. 310-315, 2011.
  5. Optistruct, "Optistruct 10.0 Reference," Altair Engineering Inc., 2010.
  6. Hwang, J. H. and Park, C. H., " Design and Evaluatio of an Ultra Precision Rotary Table for freeform machine tools," Journal of KSPE, Vol. 27, No. 7, pp. 94-100, 2010.

Cited by

  1. Performance Evaluation of Hydrostatic Bearing Guided Rotary Table for Large Volume Multi-tasking Vertical Lathe vol.31, pp.7, 2014, https://doi.org/10.7736/KSPE.2014.31.7.635