한국전산유체공학회지 (Journal of computational fluids engineering)

한국전산유체공학회 (Korean Society of Computational Fluids Engineering)
권호 표지
DOI QR코드

DOI QR Code

전산해석과 실험의 비교검증을 통한 원통형 수중운동체 주위의 캐비테이션 유동현상 연구

COMPARISON OF CFD SIMULATION AND EXPERIMENT OF CAVITATING FLOW PAST AXISYMMETRIC CYLINDER

  • 박형만 (부산대학교 기계공학부) ;
  • 박원규 (부산대학교 기계공학부) ;
  • 정철민 (국방과학연구소, 제6기술연구본부)
  • Park, H.M. (Dept. of Mechanical Engineering,, Pusan Nat'l Univ.) ;
  • Park, W.G. (Dept. of Mechanical Engineering,, Pusan Nat'l Univ.) ;
  • Jung, C.M. (Naval System Development, Agency for Defense Development)
  • 투고 : 2012.02.03
  • 심사 : 2012.03.20
  • 발행 : 2012.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Cavitation causes a great deal of noise, damage to components, vibrations, and a loss of efficiency in devices, such as propellers, pump impellers, nozzles, injectors, torpedoes, etc., Thus, cavitating flow simulation is of practical importance for many engineering systems. In this study, a two-phase flow solver based on the homogeneous mixture model has been developed. The flow characteristics around an axisymmetric cylinder were calculated and then validated by comparing with the experimental results in the cavitation water tunnel at the Korea Ocean Research & Development Institute. The results show that this solver is highly suitable for simulating the cavitating flows. After the code validation, the cavity length with changes of water depth, angle of attack and velocity were obtained.. Cavitation inception was also calculated for various operational conditions.

키워드

참고문헌

  1. 1994, Reboud, J.L. and Delannoy, Y., "Two Phase Flow Modeling of Unsteady Cavitation," Proceeding of 2nd International Symposium on Cavitaion, Tokyo, Japan, pp.39-44.
  2. 1998, Song, C. and He J., "Numerical simulation of cavitating flows by single-phase flow approach," Proceedings of 3rd International Symposium on Cavitation, Grenoble, France, pp.295-300.
  3. 2001, Kunz, R.F., Lindau J.W., Billet M.L. and Stinebring D.R., "Multiphase CFD Modeling of developed and supercavitating flows," Applied Reserch Lab. Rept.
  4. 2004, Owis, F.M. and Nayfeh, A.H., "Numerical Simulation of 3-D Incompressible, Multi-phase Flows over Cavitating Projectiles," European Journal of Mechanics B/Fluids, pp.339-351.
  5. 2009, Ha, C.T., Park, W.G. and Merkle, C.L, "Multiphase Flow Analysis of Cylinder Using A New Cavitation Model," Proceedings of the 7rd International Symposium on Cavitation, Michigan, USA.
  6. 2000, Kunz R. F., Boger D. A., Stinebring D. R., Chyczewski T. S., Lindau J. W., Gibeling H. J., Venkateswaran S. and Govindan T. R., "A preconditioned Navier-Stokes method for two-phase flows with application to cavitation prediction," Computers and Fluids, Vol29, pp.849-875. https://doi.org/10.1016/S0045-7930(99)00039-0
  7. 2010, Huang, B., Wang, G.Y., Yuan, H.T., "A Cavitation Model for Cavitating Flow Simulations," 9th International Conference on Hydrodynamics, Shanghai, China, pp.798-804.
  8. 2011, 김승윤, 박원규, 정철민, "서로 다른 캐비테이션 모델을 이용한 실린더 주위의 캐비테이션 유동현상 전산해석," 한국전산유체공학회지, 제16권, 제1호, pp.60-66. https://doi.org/10.6112/kscfe.2011.16.1.060
  9. 1998, Grogger, H.A. and Alajbegovic, A., "Calculation of The Cavitating Flow in Venture Geometries Using Two Fluid Model," Washington, D.C., USA, ASME Paper FEDSM 98-5295.
  10. 2005, Staedkte, H., Deconinck, H., and Romenski, E., "Advanced Three-dimensional Two-phase Flow Simulation Tools for Application Reactor Safety(ASTAR)," Nuclear Engineering and Design, Vol.235, pp.379-400. https://doi.org/10.1016/j.nucengdes.2004.08.052
  11. 2006, Merkle, C. Li, D. Sankaran, V. "Multi-Disciplinary Computational Analysis in Propulsion," Sacramento, USA, AIAA 2006-4575.
  12. 2010, Ha C.T. and Park W.G., "Application of Strongly Implicit Procedure Solver to Solve Partial- and Super- Cavitating Flows," ICCES MM'10, Busan, Korea, ICML20100714039.
  13. 1948, Rouse H. and McNown J.S., "Cavitation and Pressure Distribution," Head Forms at Zero Angle of Yaw, Stud. Engrg., Vol.32, State University of Iowa.
  14. 1969, Christopher Brennen, "A numerical solution of axisymmetric cavity flows," , J.Fluid.Mech., Vol.37, part4, pp.671-688. https://doi.org/10.1017/S0022112069000802

피인용 문헌

  1. Numerical Investigation of Drag and Lift Characteristics of Cavitator of Supercavitating Underwater Vehicle vol.38, pp.10, 2014, https://doi.org/10.3795/KSME-B.2014.38.10.797