References
- A. F. Graf, W. F. Hosford, 1993, Calculation of Forming Limit Diagrams for Changing Strain Paths, Met. Trans. A., Vol. 24, No. 11, pp. 2497-2501. https://doi.org/10.1007/BF02646528
- H. J. Kleemola, M. T. Pelkkikangas, 1977, Effect of Predeformation and Strain Path on the Forming Limits of Steel, copper and brass, Sheet Metal Indust., Vol. 63, No. 6, pp. 591-599.
- T. B. Stoughton, 2000, A General Forming Limit Criterion for Sheet Metal Forming, Int. J. Mech. Sci., Vol. 42, No. 1, pp. 1-27. https://doi.org/10.1016/S0020-7403(98)00113-1
- T. B. Stoughton, X. Zhu, 2004, Review of Theoretical Models of the Strain-based FLD and their Relevance to the Stress-based FLD, Int. J. Plasticity, Vol. 20, No. 8-9, pp. 1463-1486. https://doi.org/10.1016/j.ijplas.2003.11.004
- W. J. Kim, H. K. Kim, W. Y, Kim, S. W. Han, 2008, Temperature and Strain Rate Effect Incorporated Failure Criteria for Sheet Forming of Magnesium Alloys, Mater. Sci. Eng. A, Vol. 488, No. 1-2, pp. 468-474. https://doi.org/10.1016/j.msea.2007.11.077
- H. K. Kim, W. J. Kim, 2010, Failure Prediction of Magnesium Alloy Sheets Deforming at Warm Temperatures using the Zener-Holloman Parameter, Mech. Mater., Vol. 42, No. 3, pp. 293-303. https://doi.org/10.1016/j.mechmat.2009.12.003
- H. K. Kim, J. D. Kim, Y. M. Heo, 2009, Warm Formability Variation of AZ31 Sheet by Double Stage Forming Velocity, Trans. Mater. Proc., Vol. 18, No. 2, pp. 112-115. https://doi.org/10.5228/KSPP.2009.18.2.112
Cited by
- Development of warm forming parts for automotive body dash panel using AZ31B magnesium alloy sheets vol.16, pp.10, 2015, https://doi.org/10.1007/s12541-015-0278-8
- Dimensional Accuracy of Cylindrical Cups in Multi-Stage Drawing of Aluminum Sheet Metal vol.24, pp.2, 2015, https://doi.org/10.5228/KSTP.2015.24.2.115
- Development of Automotive Dash Panel Parts Using Warm Drawing of Magnesium Alloy AZ31B vol.24, pp.4, 2015, https://doi.org/10.5228/KSTP.24.4.248