References
- R. M. German, A. Bose, 1997, Injection Molding of Metal and Ceramics, Metal Powder Industries Federation, Princeton, NJ, pp. 11-24.
- P. J. Vervoort, R. Vetter, J. Duszczyk, 1996, Overview of Powder Injection Molding, Adv. Perform. Mater., Vol. 3, No. 2, pp. 121-151. https://doi.org/10.1007/BF00136742
- L. Qingfa, 2000, Gas-assisted PIM, SIMTech Technical Report, pp. 1-9.
- W. Michaeli, C. Hopmann, 2000, New Perspectives for Ceramic Injection Molding with Gas Injection, Adv. Eng. Mater., Vol. 2, No. 12, pp. 827-832. https://doi.org/10.1002/1527-2648(200012)2:12<827::AID-ADEM827>3.0.CO;2-6
- K. Lee, M. De Hoyos, S. Ahn, R. Nambiar, M. A. Gonzalez, S. J. Park, R. M. German, 2010, Gas-Assisted Powder Injection Molding: A Study on the Effect of Processing Variables on Gas Penetration, Powder Technol., Vol. 200, No. 3, pp. 128-135. https://doi.org/10.1016/j.powtec.2010.02.013
- R. Malloy, 1994, Plastics product design for injection molding, Hanser Publishers, New York, pp. 108-113.
- M. A. Parvez, N. S. Ong, Y. C. Lam, S. B. Tor, 2002, Gas-assisted Injection Molding: The Effects of Process Variables and Gas Channel Geometry, J. of Mater. Process. Technol., Vol. 21, No. 1, pp. 27-35.
- R. Urval, S. Lee, S. V. Atre, S. J. Park, R. M. German, 2008, Optimisation of Process Conditions in Powder Injection Moulding of Microsystem Components using a Robust Design Method: Part I. Primary Design Parameters, Powder Metall., Vol. 51, No. 2, pp. 133-142. https://doi.org/10.1179/174329008X284796
- N. S. Ong, H. L. Lee, M. A. Parvez, 2001, Influence of Processing Conditions and Part Design on the Gas-Assisted Injection Molding Process, Adv. Polym. Tech., Vol. 20, No. 4, pp. 270-280. https://doi.org/10.1002/adv.10000
- S. Y. Yang, C. T. Lin, J. H. Chang, 2003, Secondary Gas Penetrations in Ribs during Full-shot Gas-Assisted Injection Molding, Adv. Polym. Tech., Vol. 22, No. 3, pp. 225-237. https://doi.org/10.1002/adv.10051
- J. P. Beaumont, J. H. Young, M. J. Jaworski, 1999, Mold Filling Imbalances in Geometrically Balanced Runner Systems, J. Reinf. Plast. Compos., Vol. 18, No. 6, pp. 572-590. https://doi.org/10.1177/073168449901800609