참고문헌
- Kim, J. H., Kim, M. Y. and Kim, H. G., 2010, "NO2-Assisted Soot Regeneration Behavior in a Diesel Particulate Filter with Heavy-Duty Diesel Exhaust Gases," Numerical Heat Transfer, Part A, Vol.58, No.9, pp.725-739. https://doi.org/10.1080/10407782.2010.523293
- Yun, B. K., Kim, C., Kim, M. Y., Cho, G. B., Kim, H. S. and Jeong, Y. I., 2010, "Numerical Modeling of Vanadia-based Commercial Urea-SCR plus DOC Systems for Heavy-duty Diesel Exhaust Aftertreatment Systems," Trans. of the KSAE, Vol.18, No.2, pp.24-30.
- Johnson, T. V., 2007, "Diesel Emission Control in Review," SAE 2007-01-0233.
- Heering, H. P., Onder, C. H., Elsener, M. and Schaer, C. M., 2003, "Control of a Urea SCR Catalytic Converter System for a Mobile Heavy duty Diesel Engine," SAE 2003-01-0776.
- Jeong, S. J., Lee, C. H., Kim, W. S. and Lee, C. H., 2007, "The Effect of Ammonia and Flow Distribution on DeNOx Performance of Urea-SCR Catalyst in a Heavy Duty Diesel Engine," Trans. of the KSAE, Vol.7, No.1, pp.229-235.
- Zhang, X. and Romzek, M., 2006, "3D Numerical Study of Mixing Characteristics of NH3 in Front of SCR," SAE 2006-01-3444.
- Lang, E., Drtina, P., Strieiff, F. and Fleischli, M., 1995, "Numerical Simulation of the Fluid Flow and the Mixing Process in an Static Mixer," International Journal of Heat and Mass Transfer, Vol.38, No.12, pp.2239-2250. https://doi.org/10.1016/0017-9310(94)00351-U
- Regner, M., Ostergren, K. and Tragardh, C., 2001, "Effect of Geometry and Flow Rate on Secondary Flow and the Mixing Process in Static Mixer-A Numerical Study," Chemical Engineering Science, Vol.61, No.18, pp.6133-6141. https://doi.org/10.1016/j.ces.2006.05.044
- Oesterle, J. J., Calvo, S., Damson, B., Feyl, G., Neumann, F. and Rudelt, J., 2008, "Urea Systems in Focus-New Challenges and Solutions in the Development of Car and Commercial Vehicle Exhaust Systems," SAE 2008-01-1186.
- Oesterle, J. J., Calvo, S., Damson, B., Feyl, G., Neumann, F. and Rudelt, J., 2008, "SCR Technology with Focus to Stringent Emissions Legislation," SAE 2008-01-2640.
- Zheng, G., Palmer, G., Salanta, G. and Kotrba, A., 2009, "Mixer Development for Urea SCR Applications," SAE 2009-01-2879.
- Chandratilleke, G. R., Yu, A. B., Stewart, B. L. and Bridgwater, J., 2009, "Effect of Blade Rake Angle and Gap on Particle Mixing in a Cylinderical Mixer," Powder Technology, Vol.193, No.3, pp.303-311. https://doi.org/10.1016/j.powtec.2009.03.007
- Fluent, 2009, Release 12.0, User's Guide.
- Kim, C., Park, N. S. and Kim, M. Y., 2009, "Numerical Investigation of the Flow and Mixing Characteristics with the Static Mixer in a Catalytic Combustor for the MCFC Power Plant System," Trans. of the KSME(B), Vol.33, No.3, pp.149-155. https://doi.org/10.3795/KSME-B.2009.33.3.149
- Hong, D., Kim, C., Kim, M. Y., Lee, S. M., and Ahn, K. Y., 2007, "A Numerical Study on the Flow Characteristics in the Mixing Region of the Catalytic Combustor," Journal of Mechanical Science and Technology, Vol. 21, No.11, pp.1791-1798. https://doi.org/10.1007/BF03177434
피인용 문헌
- Numerical Investigation of the Spray Behavior and Flow Characteristics of Urea-Water Solution Injected into Diesel Exhaust Pipe vol.38, pp.1, 2014, https://doi.org/10.3795/KSME-B.2014.38.1.041