DOI QR코드

DOI QR Code

Rotor Blade Design of a 1MW Class HAWT and Evaluation of Aerodynamic Performance Using CFD Method

1MW급 수평축 풍력터빈 로터 블레이드 설계 및 CFD에 의한 공력성능 평가

  • Received : 2011.06.07
  • Accepted : 2011.09.29
  • Published : 2012.02.01

Abstract

In this investigation, the aerodynamic performance evaluation of a 1MW class blade has been performed with the purpose of the verification of target output and its clear understanding of flow field using CFD commercial code, ANSYS FLUENT. Before making progress of CFD analysis the HERACLES V2.0 software based on blade element momentum theory was applied for confirmation of quick and approximate performance in the preliminary stage. The blade was designed to produce the target output of a 1MW class at a rated wind speed of 12m/s, which consists of five different airfoils such as FFA W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power by CFD is approximately 1.195MW, which is converted into the electrical power of 1.075MW if the system loss is considered to be 0.877.

Keywords

References

  1. 저풍속형 풍력발전기 핵심기술 개발(I), 공공기술연구회, 2007.
  2. 중대형 풍력발전 시스템의 성능평가 기반 및 기술기준 확보, 산업자원부, 2007.
  3. 모장오, 김범석, 김만응, 최영도, 이영호, 2011, "날개요소 운동량 이론을 이용한 피치제어형 수평축 풍력터빈 블레 이드 설계 및 성능평가 소프트웨어 개발," 유체기계저널 제14권 제2호,
  4. Viterna, L. A. and Corrigan, R. D., "Fixed Pitch Rotor Performance of Large Horizontal-Axis Wind Turbines," DOE/NASA Workshop on Large Horizontal Axis Wind Turbines, Cleveland, Ohio, July 1981.
  5. A. Betz, Windenergie und ihre ausnutzung durch windmühlen, vandenhoek und rupprecht (1926); Vieweg Gottingen (1946).
  6. F. R. Menter. "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, 32(8): 1598-1605 ,August 1994. https://doi.org/10.2514/3.12149
  7. P. H. Cook, M. A., McDonald and M. C. P. Firmin, "Aerofoil RAE 2822 Pressure Distributions, and Boundary Layer and Wake Measurements," AGARD AR 138, A6, May 1979.
  8. H. Ok and D. S., Eberhardt "Calculation of Flowfield around an Airfoil with Spoiler," AIAA Paper 93-0527, Jan. 1993.
  9. J. O. Mo and Y. H. Lee,, 2011, "Numerical simulation for prediction of aerodynamic noise characteristics on a HAWT of NREL Phase VI," Journal of Mechanical Science and Technology 25(5), 1341-1349. https://doi.org/10.1007/s12206-011-0234-1
  10. 모장오, 이영호, 2009, "NREL Phase VI 수평축 풍력터빈의 공력특성에 관한 수치적 연구," 한국마린엔지니어링학회지 제33권 제6호.
  11. H. Erich, 2000, "Wind turbines," Springer Verlag.

Cited by

  1. Predicting the Generation Performance of Downwind Wind Turbine by Turbulence Modeling vol.17, pp.3, 2012, https://doi.org/10.14801/jkiit.2019.17.3.135