DOI QR코드

DOI QR Code

차세대 터보프롭 항공기용 복합재 최신 프로펠러 설계 및 해석

The Design and Analysis of Composite Advanced Propeller Blade for Next Generation Turboprop Aircraft

  • 최원 (한국항공우주산업(주) 고정익비행성능팀) ;
  • 김광해 (한국항공우주산업(주) 고정익비행성능팀) ;
  • 이원중 (한국항공우주연구원 항공안전기술개발사업단)
  • 투고 : 2012.02.23
  • 심사 : 2012.11.01
  • 발행 : 2012.12.01

초록

The one way fluid structure interaction analysis on advanced propeller blade for next generation turboprop aircraft. HS1 airfoil series are selected as a advanced propeller blade airfoil. Adkins method is used for aerodynamic design and performance analysis with respect to the design point. Adkins method is based on the vortex-blade element theory which design the propeller to satisfy the condition for minimum energy loss. propeller geometry is generated by varying chord length and pitch angle at design point. Blade sweep is designed based on the design mach number and target propulsion efficiency. The aerodynamic characteristics of the designed Advanced propeller were verified by CFD(Computational Fluid Dynamic) and showed the enhanced performance than the conventional propeller. The skin-foam sandwich structural type is adopted for blade. The high stiffness, strength carbon/epoxy composite material is used for the skin and PMI(Polymethacrylimide) is used for the foam. Aerodynamic load is calculated by computational fluid dynamics. Linear static stress analysis is performed by finite element analysis code MSC.NASTRAN in order to investigate the structural safety. The result of structural analysis showed that the design has sufficient structural safety. It was concluded that structural safety assessment should incorporate the off-design points.

키워드

참고문헌

  1. Colman Shattuck, Jon Young., 1993 "Modern Propeller Technology for Advanced Turboprop Aircraft," AIAA/ SAE/ASME/ASEE 20th Joint Propulsion Conference and Exhibit.
  2. J.A. Lieser, D. Lohmann, C.H. Rohardt., 1997, "Aeroacoustic Design of a 6-Bladed Propeller," Aerospace Science and Technology, No. 7, pp. 381-389.
  3. Adkins, Charles N., Liebeck, Robert H., 1983, "Design of Optimum Propellers," American Institute of Aeronautices and Astronautics.
  4. 이기학, 김규홍, 이경태, 2002. 4, "효율최대화를 위한 초소 형비행체 프로펠러 최적형상설계," 한국항공우주학회 2002 년도 춘계학술발표회 논문집, pp. 286∼292.
  5. Lee, K.H, Jeon, Y.H, Bae, E.S, Lee, D.H, Lee, K.T, 2004, "Implementation of the Numerical Optimization for the Micro-Air Vehicle Propeller," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, New York.
  6. W. Choi, J.S Choi, I.M Jung, J.H Kim, I.W Lee, S.H Han, Y.S. Won., 2011.5, "CFD Analysis of Aerodynamic Characteristics of Regional Turboprop Aircraft Propeller," Proceeding of the 2011 KSCFE Spring Conference, pp. 447-452.
  7. W. Choi, J. H. Kim, 2011. 11, "Aerodynamic Analysis on Advanced Propeller Blade for Turboprop Aircraft," Proceeding of the 2011 KSAS Fall Conference.
  8. Y. G. Kim, K. C. Kim., 2007. 5, "FSI analysis on wind turbine blade," Proceeding of the 2011 KSME Spring Conference, pp. 2368-2371.
  9. C. D. Kong, H. B. Park, G. S. Lee, W. Choi., 2011. 4, "A Study on Conceptual Structural Design for Composite Propeller Balde of Turboprop," Proceeding of the 2011 KSAS Spring Conference.
  10. C. D. Kong., 2005, "Structural investigation of composite wind turbine blade considering various cases and fatigue life", ENERGY, Vol. 30, pp. 2101-2114. https://doi.org/10.1016/j.energy.2004.08.016
  11. www.matweb.com
  12. H. K. Kim, J. H. Lee, S. M. Jang, K. W. Kang., 2010. 7, "Structural Analysis and Testing of 1.5kW Class Wind Turbine Blade," Journal of the Korea Fluid Machinery Association, Vol. 13, No. 4, pp. 51-57. https://doi.org/10.5293/KFMA.2010.13.4.051