한국유체기계학회 논문집 (The KSFM Journal of Fluid Machinery)

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

터빈 블레이드 온도 변화를 고려한 증기분사 가스터빈 열병합발전 시스템의 성능해석

Performance Analysis of a Steam Injected Gas Turbine Combined Heat and Power System Considering Turbine Blade Temperature Change

  • 투고 : 2012.03.02
  • 심사 : 2012.09.17
  • 발행 : 2012.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study simulated the operation of a steam injected gas turbine combined heat and power (CHP) system. A full off-design analysis was carried out to examine the change in the turbine blade temperature caused by steam injection. The prediction of turbine blade temperature was performed for the operating modes suggested in the previous study where the limitation of compressor surge margin reduction was analyzed in the steam injected gas turbine. It was found that both the fully injected and partially injected operations suggested in the previous study would cause the blade temperature to exceed that of the pure CHP operation and the under-firing operation would provide too low blade temperature. An optimal operation was proposed where both the turbine inlet temperature and the injection amount were modulated to keep both the reference turbine blade temperature and the minimum compressor surge margin. The modulation was intended to maintain a stable compressor operation and turbine life. It was shown that the optimal operation would provide a larger power output than the under-firing operation and a higher efficiency than the original partially injected operation.

키워드

참고문헌

  1. Jonsson, M., Yan, J., 2005, "Humidified gas turbines-a review of proposed and implemented cycles," Energy, Vol. 30, Issue 7, pp. 1013-1078. https://doi.org/10.1016/j.energy.2004.08.005
  2. Rice, I. G., 1995, "Steam-injected gas turbine analysis: steam rates," Journal of engineering for gas turbines and power, Vol. 117, pp. 347-353. https://doi.org/10.1115/1.2814101
  3. Kim, T. S., Cho, M. K., Ro, S. T., Kauh, S. K., 1997, "Analysis of small steam injected gas turbine system with heat recovery," Trans. of the KSME(B), Vol. 21, No. 8, pp. 996-1008.
  4. Paepe, De M., Dick, E., 2000, "Cycle improvements to steam injected gas turbines," International journal of energy research, Vol. 24, pp. 1081-1107. https://doi.org/10.1002/1099-114X(20001010)24:12<1081::AID-ER641>3.0.CO;2-6
  5. Fischer, A. C., Frutschi, H. U., Haselbacher, H., 2001, "Augmentation of gas turbine power output by steam injection," ASME paper, 2001-GT-0107.
  6. Lee, J. J., Jeon, M. S., Kim, T. S., 2010, "The influence of water and steam injection on the performance of a recuperated cycle microturbine for combined heat and power application," Applied energy, Vol. 87, pp. 1307- 1316. https://doi.org/10.1016/j.apenergy.2009.07.012
  7. Kim, Y. S., Lee, J. J., Kim, T. S., Sohn, J. L., 2011, "Effects of syngas type on the operation and performance of a gas turbine in integrated gasification combined cycle," Energy Conversion and Management, Vol. 52, Issue 5, pp. 2262-2271. https://doi.org/10.1016/j.enconman.2011.01.009
  8. 강도원, 이종준, 김동섭, 허광범, 2011, "바이오 가스를 사용하는 가스터빈 열병합 시스템의 전부하 및 부분부하 운전특성 해석," 유체기계저널, 제 14권, 제 2호, pp. 35-40.
  9. 강수영, 김동섭, 2011, "증기분사에 의한 가스터빈 열병합 발전 시스템의 성능과 운전조건 변화-압축기 작동 변화를 중심으로," 유체기계저널, 제14권, 제2호, pp. 68-75.
  10. http://mysolar.cat.com/cda/files/304496/7/ds65gs.pdf
  11. Rocha, G., Reynolds, S., Brown, T., 2008, "Introduction of the TaurusTM65 industrial gas turbine for power generation," GT2008-51328.
  12. Enter Software. GateCycle ver 6.0, 2006.
  13. Erbes, M. R., Gay. R. R., 1989, "Gate/Cycle predictions of the off-design performance of combined-cycle power plants," ASME Winter Annual Meeting, Vol. 124, pp. 43-51.
  14. Kim T. S., Ro S.T., 1995, "Comparative evaluation of the effect of turbine configuration on the performance of heavy-duty gas turbines," ASME paper 95-GT-334.
  15. Meherwan. P. B., 2002, Gas Turbine Engineering Handbook, Second edition, Gulf Professional Publishing, US.
  16. Ganapathy, V., 1985, "Heat-recovery boiler design for cogeneration," Oil & Gas Journal, pp. 116-125.
  17. Kehlhofer, R., 1978, "Calculation for part-load operation of combined gas/steam turbine plants," Brown Boveri Rev, Vol. 65, No. 10, pp. 672-679.