Abstract
The passive control by vertical splitter plate of fluid force acting on a square prism near a plane wall was studied by measuring of fluid force on the prism and by visualization of the flow field using PIV. The hight of the splitter plate was 10% of the square width. The experimental parameters were the attaching position of vertical splitter plate and the space ratios G/B to the prism height. Time variation of vorticity was most remarkable at 3.0B(B: prism height) position toward wake direction from the center of the prism. The point of inflection of average lift coefficient and Strouhal number on the prism were represented at the space ratio G/B=0.4~0.6 for the prism having vertical splitter plate. The drag of the prism was reduced average 5.0% with the space ratios by attaching the vertical splitter plate at the upper and rear corner on the prism. In this case, the size of the separated region on the upside of the prism was smaller than that of prism having no the splitter plate.
본 연구는 벽면 근처에 놓인 정방형주의 모서리에 수직 분할판을 부착하여 유체력 제어 효과를 양항력 측정실험 및 PIV에 의한 가시화 실험으로 조사한 것이다. 분할판의 폭은 정방형주 폭의 10% 로 했다. 실험변수로서는 수직 분할판의 부착 위치 및 벽면과 사각주 사이의 간격으로 하였다. 정방형주 중심에서 후류방향으로 3.0B(B: 정방형주 한 변 길이) 떨어진 곳에서 와도의 변화가 가장 명확했다. 수직 분할판의 위치 및 유무와 관계없이 간격비 0.4~0.6에서 평균양력계수 및 Strouhal 수의 변곡점이 나타났다. 정방형주 윗면의 뒷 모서리에 수직 분할판을 설치한 경우 항력이 감소하였으며 각 간격비 평균 5.0%의 항력 저감 효과를 얻었다. 정방형주 윗면 박리영역의 크기는 앞쪽 모서리에 수직 분할판을 설치한 경우가 가장 컸고, 원형의 정방형주, 뒷쪽 모서리에 수직 분할판을 설치한 순서로 작았으며, 평균항력계수는 이 박리영역의 크기에 비례했다.