References
- ANSYS Inc., 2010. ANSYS User's Manual Fluent Theory Guide. Version 13.0. ANSYS Inc.: USA.
- Choi, K.S., 1995. Prospects of the Domestic and Foreign Academic Research in the Polar Engineering. Journal of the Society of Naval Architects of Korea, 32(32), pp.27-32.
- Jeong, S.Y. Lee, C.J. & Cho, S.R., 2011a. A Study on Anti-icing Technique for Ballast Water of Icebreaking Vessels Operating in Ice-covered Water. Journal of the Society of Naval Architects of Korea, 48(1), pp.93-97. https://doi.org/10.3744/SNAK.2011.48.1.93
- Jeong, S.Y. Chun, E.J. Cho, S.R. & Lee, C.J., 2011b. A Study on Anti-icing Technique for Weather-Tight Door of Ice-Strengthened Vessel. Journal of the Society of Naval Architects of Korea, 48(6), pp.575-580. https://doi.org/10.3744/SNAK.2011.48.6.575
- Juen, H.Y. Lee, C.K. Bae, H.J. & Lee, S. J., 2005. A Study on Performance Test and Verification of Heat Transfer characteristics in Automobile Rear Window Heater. Journal of the Korea Society for Power System Engineering, 9(2), pp.73-80.
- Kang, H.K. Kim, K.P. & Kim, D.H., 2010. Requirements of Mechanical and Environmental Conditions on Winterization of Vessels Intended for Cold Climate Operation. Collection of dissertations of The Korea Society of Marine Engineering, 2010(10), pp.83-86.
- Kim, K.P. Kang, H.K. Kim, D.H. & Ha, T.B., 2010. International Convention & Class Requirement of Equipments for Ice Class Vessels Collection of dissertations of The Korea Society of Marine Engineering. Journal of the Korea Society for Power System Engineering, 2(), pp.73-80.
- Kim, Y.K. Yang, J.S. Kim, K.C. & Ji, H.S., 2011. Numerical Study on the Performance Assessment for Defrost and De-Icing Modes. Journal of mechanical science and technology, 35(2), pp.161-168. https://doi.org/10.3795/KSME-B.2011.35.2.161
- Ministry of Knowledge Economy, 2012. Cold Region Design Specification and Winterization(PNS133C).
Cited by
- A Study on the De-Icing Performance Evaluation and Design Guide for Ice Class Louver of the Vessels Operating in Cold Region vol.52, pp.4, 2015, https://doi.org/10.3744/SNAK.2015.52.4.323
- Heat Transfer Characteristics of Bulkhead Penetration Piece for A60 Class Compartment I: Transient Thermal vol.32, pp.5, 2018, https://doi.org/10.26748/KSOE.2018.6.32.5.310